Test Method for Retractable Type Fall Arresters Designed for Horizontal Use

Retractable type fall arresters are designed to protect against falls from a height of people who need freedom of vertical movement. The practice of fall protection shows that the devices are also used to protect people who work on flat roofs. This application creates quite different operating conditions for the devices. In some situations those conditions can be dangerous for users. The article presents a theoretical analysis of phenomena occurring during a fall arrest with retractable type fall arresters arranged horizontally. The analysis was verified with laboratory tests. The article presents a proposal for the construction of a test stand and a test method for estimating retractable type fall arresters intended for horizontal use.     

Locking of Retractable Type Fall Arresters—Test Method and Stand

Retractable type fall arresters are very effective personal equipment protecting against falls from a height. These devices are used under different atmospheric conditions and in the presence of various types of industrial pollution. For this reason appropriate locking after conditioning simulating extreme conditions of a worksite is one of the essential characteristics of retractable type fall arresters. This article presents the requirements for locking of the devices. A previously used locking test method and its disadvantages are discussed. The article suggests an improved test method and test equipment. Measurement of the test mass acceleration is the most important improvement introduced into the test method. The article shows laboratory tests used to verify the method, which turned out to be a valuable source of information concerning the performance of retractable type fall arresters.     

Dust Emission and Efficiency of Local Exhaust Ventilation During Cast Iron Grinding

A method of determining dust emission and efficiency of its removal by means of local exhaust ventilation from machinery has been described. It complies with Standard No. EN 1093-3:1996 (European Committee for Standardization, 1996) and consists in determining air pollution concentra-tions in the measurement duct used for air removal from the chamber incorporating devices to be tested. The air volume stream that is pumped is measured at the same time.

Test results are presented for dust emission and the efficiency of local exhaust ventilation for cast iron grinding by means of manual power tools and a bench-sander. It has been found that application of local exhaust ventilation contributes to a significant reduction of dust emission with efficiency greater than 90%.     

The Cytotoxicity of Some Organic Solvents on Isolated Hepatocytes in Monolayer Culture

The cytotoxic effects of volatile and water-insoluble organic solvents (ethylbenzene, tetrachloroethylene, n-hexane) were tested on isolated hepatocytes in monolayer culture by using the 3-(4,5 dimethylthiazol-2-yl)-2,5 diphenyltetrazolium bromide (MTT) reduction assay. All of the tested compounds inhibited metabolic activity of hepatocytes and this effect depended on the concentration of solvents in the incubatory medium. The presence of fetal calf serum in the medium did not change the cytotoxicity of xenobiotics. IC₅₀ values calculated on the basis of the MTT assay indicated that ethylbenzene was more cytotoxic than tetrachloroethylene and n-hexane. Using hepatocyte monolayer culture and the MTT assay to assess cytotoxicity of organic solvents causes many technical problems. It seems that it cannot be used as a rapid, cheap, and credible method.     

Body Heat Balance of a Man with Deficient Sweat Rate Subjected to Physical Work in a Hot Environment

The dynamics of physiological stress and thermal balance were investigated in men subjected to endogenous and exogenous heat loads. The study was conducted using the thermometric method. Substantial differences in the dynamics of the tested parameters and their quantitative characteristics were observed in 1 out of 8 participants. In this article, the observed differences are rationalized in terms of the deficient sweat rate mechanism. It is pointed out that it is indispensable to address these cases in work safety regulations.     

Carbon isotope effects during precipitation of barium carbonate: implications for environmental studies

Here we demonstrate that precipitation of dissolved inorganic carbon (DIC) to at pH 10.26, 11.38 and 12.11 does not cause measurable carbon isotope fractionation. However, NaOH solution prepared under standard laboratory procedure and used to increase pH value for precipitation of BaCO₃ can be contaminated by atmospheric CO₂. In our experiment, δ¹³C value in the contaminant DIC was −24.30‰, which resulted in decrease in the δ¹³C(DIC) value by 0.03, 0.07 and 0.22 at pH 10.26, 11.38 and 12.11, respectively.     

Work ability in ageing workers suffering from chronic diseases.

The aim of this study was to investigate the work ability in ageing workers suffering from osteoarthritis (OA), coronary heart disease (CHD) or hypertension (H). One hundred and sixty-six OA and 355 CHD/H outpatients were evaluated. The Work Ability Index (WAI) served for work ability assessment. Patients' results were compared with the results of a control group of 225 healthy young workers. Statistical analysis was performed with ANOVA tests. WAI in female and male CHD/H patients was higher than in OA patients (p < .01), better work ability was related to better education (p < .01), white-collar work (p < .01) and better recreation (p < .01); subjective work ability was determined mostly by the objective health status. The promotion of work ability among workers suffering from advanced age-related diseases should be closely related to the promotion of health. It is indicative to improve occupational education and skills, already at an early stage of a disease.     

Influence of the milling tool setup on occupational safety in furniture making

One of the most serious causes of accidents in furniture making is kickback of machined material. The aim of this study was to determine the influence of the milling tool setup on hazards associated with kickback in furniture making. The speed of kickback was accepted as the measure of these hazards. The experiment involved controlled changes in milling tool setup, projection of cutting knives over the body of the milling tool, number of cutting knives and clearance angle. Multifactor analysis of variance was applied to the results of individual experiments, showing statistically significant factors and their interactions. Inspection and analysis of traces left by the cutting knives of the tools on the test pieces made of wood materials supported inferential statistics. The obtained results verified some common opinions and ideas on the impact of the milling tool setup on the hazards resulting from kickback in furniture making.     

Energy reserves and accumulation of metals in the ground beetle Pterostichus oblongopunctatus from two metal-polluted gradients

Living in an area chronically polluted with metals is usually associated with changes in the energy distribution in organisms due to increased energy expenses associated with detoxification and excretion processes. These expenses may be reflected in the available energy resources, such as lipids, carbohydrates, and proteins. In this context, the energy status of Pterostichus oblongopunctatus (Coleoptera: Carabidae) was studied in two metal pollution gradients near Olkusz and Miateczko ?l?skie in southern Poland. Both regions are rich in metal ores, and the two largest Polish zinc smelters have been operating there since the 1970s. Beetles were collected from five sites at each gradient. Zinc and cadmium concentrations were measured in both the soil and the beetles. The possible reduction in energy reserves as a cost of detoxifying assimilated metals was evaluated biochemically by determining the total lipid, carbohydrates, and protein contents. At the most polluted sites, the Zn concentration in the soil organic layer reached 2,906 mg/kg, and the Cd concentration reached 55 mg/kg. Body Zn and Cd concentrations increased with increasing soil Zn and Cd concentrations (p?=?0.003 and p?=?0.0001, respectively). However, no relationship between pollution level and energetic reserves was found. The results suggest that populations of P. oblongopunctatus inhabiting highly metal-polluted sites are able to survive without any serious impact on their energy reserves, though they obviously have to cope with elevated body metal concentrations.