Sedimentation of PCDD/Fs and PCBs in the Gulf of Finland and the Gulf of Bothnia,the Baltic Sea

Sediment trap material was collected during May–December in the period 1996–2008 in three coastal areas and four open sea stations in the Finnish territory of the Baltic Sea. The highest sedimentation of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) with a typical source-related congener profile from chlorophenol production dominated by highly chlorinated dibenzofurans was found close to a historical source in the Kymijoki estuary. This was an order of magnitude higher than in other river estuaries and two orders of magnitude higher than in the open sea stations. The sedimentation of polychlorinated biphenyls (PCBs) was also higher in river estuaries than in other areas. No significant decrease over a 12 year period of monitoring was found in concentration or in sedimentation in the Kymijoki estuary. In the western Gulf of Finland, the Archipelago Sea and the Gulf of Bothnia, the dominating congeners, calculated as toxic equivalent (TEQ) in sedimentation were 1, 2, 3, 7, 8-PeCDD and 2, 3, 4, 7, 8-PeCDF, often reported as the main congeners in deposition.     

Aerosol Particle Number Concentration Measurements in Five European Cities Using TSI-3022 Condensation Particle Counter over a Three-Year Period during Health Effects of Air Pollution on Susceptible Subpopulations

Abstract

In this study, long-term aerosol particle total number concentration measurements in five metropolitan areas across Europe are presented. The measurements have been carried out in Augsburg, Barcelona, Helsinki, Rome, and Stockholm using the same instrument, a condensation particle counter (TSI model 3022). The results show that in all of the studied cities, the winter concentrations are higher than the summer concentrations. In Helsinki and in Stockholm, winter concentrations are higher by a factor of two and in Augsburg almost by a factor of three compared with summer months. The winter maximum of the monthly average concentrations in these cities is between 10,000 cm^-3 and 20,000 cm^-3, whereas the summer min is ?;5000–6000 cm^-3. In Rome and in Barcelona, the winters are more polluted compared with summers by as much as a factor of 4–10. The winter maximum in both Rome and Barcelona is close to 100,000 cm^-3, whereas the summer minimum is >10,000 cm^-3. During the weekdays the maximum of the hourly average concentrations in all of the cities is detected during the morning hours between 7 and 10 a.m. The evening maxima were present in Barcelona, Rome, and Augsburg, but these were not as pronounced as the morning ones. The daily maxima in Helsinki and Stockholm are close or even lower than the daily minima in the more polluted cities. The concentrations between these two groups of cities are different with a factor of about five during the whole day. The study pointed out the influence of the selection of the measurement site and the configuration of the sampling line on the observed concentrations.     

Internal ecosystem feedbacks enhance nitrogen-fixing cyanobacteria blooms and complicate management in the Baltic Sea

Eutrophication of the Baltic Sea has potentially increased the frequency and magnitude of cyanobacteria blooms. Eutrophication leads to increased sedimentation of organic material, increasing the extent of anoxic bottoms and subsequently increasing the internal phosphorus loading. In addition, the hypoxic water volume displays a negative relationship with the total dissolved inorganic nitrogen pool, suggesting greater overall nitrogen removal with increased hypoxia. Enhanced internal loading of phosphorus and the removal of dissolved inorganic nitrogen leads to lower nitrogen to phosphorus ratios, which are one of the main factors promoting nitrogenfixing cyanobacteria blooms. Because cyanobacteria blooms in the open waters of the Baltic Sea seem to be strongly regulated by internal processes, the effects of external nutrient reductions are scale-dependent. During longer time scales, reductions in external phosphorus load may reduce cyanobacteria blooms; however, on shorter time scales the internal phosphorus loading can counteract external phosphorus reductions. The coupled processes inducing internal loading, nitrogen removal, and the prevalence of nitrogen-fixing cyanobacteria can qualitatively be described as a potentially self-sustaining "vicious circle." To effectively reduce cyanobacteria blooms and overall signs of eutrophication, reductions in both nitrogen and phosphorus external loads appear essential.     

Mass,energy and material balances of SRF production process. Part 2: SRF produced from construction and demolition waste

In this work, the fraction of construction and demolition waste (C&D waste) complicated and economically not feasible to sort out for recycling purposes is used to produce solid recovered fuel (SRF) through mechanical treatment (MT). The paper presents the mass, energy and material balances of this SRF production process. All the process streams (input and output) produced in MT waste sorting plant to produce SRF from C&D waste are sampled and treated according to CEN standard methods for SRF. Proximate and ultimate analysis of these streams is performed and their composition is determined. Based on this analysis and composition of process streams their mass, energy and material balances are established for SRF production process. By mass balance means the overall mass flow of input waste material stream in the various output streams and material balances mean the mass flow of components of input waste material stream (such as paper and cardboard, wood, plastic (soft), plastic (hard), textile and rubber) in the various output streams of SRF production process. The results from mass balance of SRF production process showed that of the total input C&D waste material to MT waste sorting plant, 44% was recovered in the form of SRF, 5% as ferrous metal, 1% as non-ferrous metal, and 28% was sorted out as fine fraction, 18% as reject material and 4% as heavy fraction. The energy balance of this SRF production process showed that of the total input energy content of C&D waste material to MT waste sorting plant, 74% was recovered in the form of SRF, 16% belonged to the reject material and rest 10% belonged to the streams of fine fraction and heavy fraction. From the material balances of this process, mass fractions of plastic (soft), paper and cardboard, wood and plastic (hard) recovered in the SRF stream were 84%, 82%, 72% and 68% respectively of their input masses to MT plant. A high mass fraction of plastic (PVC) and rubber material was found in the reject material stream. Streams of heavy fraction and fine fraction mainly contained non-combustible material (such as stone/rock, sand particles and gypsum material).     

Comprehensive two-dimensional gas chromatography, a valuable technique for screening and semiquantitation of different chemical compounds in ultrafine 30 nm and 50 nm aerosol particles

Comprehensive two dimensional gas chromatography-time-of-flight mass spectrometry (GC×GC-TOF-MS) was used for screening and semiquantitation of semivolatile organic compounds in aerosol particles. As the volatility was a prerequisite parameter for the analysis, some compounds were transformed via derivatization such as silylation into more volatile ones. The identification of the analytes was made by comparing the GC retention indices and the TOF mass spectra with the NIST and the Golm metabolome database reference libraries. The data treatment was simplified by exploiting an additional classification of the identified compounds, namely the main functional group or specific element present in the molecule leading to different groups of compounds. This methodology was applied to identify compounds in 30 ± 4 nm, 50 ± 5 nm and total suspended particles (TSP) collected during spring and autumn of 2009 and summer of 2010 at the Station for Measuring Forest Ecosystem Atmosphere Relations (SMEAR II) at Hyyti?l? (Finland). The number of identified compounds was higher than 400, which were the most relevant compounds present in the samples, in terms of concentrations. The analysis of aerosol particles of different sizes, collected simultaneously, revealed that the number of compounds increased with the particle size whereas the normalized response factor decreased in most of the cases, aldehydes being an exception. This decrease could be associated with the formation or aggregation of new compounds onto the particles when they grow in the atmosphere.     

Potential synergies of the main current forestry efforts and climate change mitigation in Central Africa

In Central Africa, important carbon stocks are stored in natural forest stands, while activities that modify the carbon storage occur in the forest landscape. Besides clean development mechanisms, the reduction of emission through deforestation and degradation (REDD) initiative is viewed as one way to mitigate climate change. Important forest habitat protection activities have already been implemented with the aim of conserving the biodiversity of the region in a sustainable manner. The main causes of land use changes in the region are small holder subsistence practices and logging activities. Agricultural production has low productivity levels and therefore investments in improved agricultural techniques can both reduce pressure on existing forests and perhaps allow for the reforestation of existing degraded lands. The logging industry is dominated by large, industrial scale, logging operations performing selective logging of specific species and large trees. The adoption of improved forest management practices can reduce the impact of such logging on the ecological integrity and carbon stocks. Some efforts to engage in the carbon market have begun in the region. Further research is needed into the types of projects that will most likely become successful in the region and what locations will offer the greatest benefits.     

Leachate direct-discharge limits and incentives related to landfill aftercare costs

Journal of Material Cycles and Waste Management - Society needs sustainable methods for landfilling from an environmental perspective, but they have to be cost effective and affordable. Aftercare...     

Computer-aided assessment of occupationally healthier processes during research and development stage

Each year more people die from occupational related diseases than are killed in industrial accidents. Therefore it is critical to start considering health aspect early when developing a new chemical process. In this paper, a computer-aided tool for assessing inherent occupational health is proposed for chemical process research and development stage. The method was developed based on the reaction chemistry data, which is the only data available at this stage. Three types of approaches were formulated to calculate the route index value using additive type, average type and worst case type calculations. The tool can be used to rank the alternative chemical synthesis routes by their health properties as well as characterize the hazard level of single process. Finally the tool was applied to six process routes for methyl methacrylate production for demonstration. The case study revealed hazards of the processes from different perspectives, e.g. the results from the additive-type calculation were mainly affected by the total number of steps in the route, which indicates the impact of process complexity on the level of hazard. The introduction of such tool provides a swift yet reliable means that will encourage health criteria to be considered earlier in process development besides economic, safety and environment.     

Analysis of equipment failures as contributors to chemical process accidents

A database study of chemical process accident cases was carried out. The objective of the study is was to identify the reasons for equipment based accidents. The most frequent accident causing equipment were piping (25%), reactors and storage tanks (both 14%) and process vessels (10% of equipment accidents). The six most accident-prone equipment is process related involve nearly 80% of accidents.78% of equipment accident contributors are technically oriented including design and human/technical interface faults. Purely human and organizational reasons are the most common accident contributors for storage tanks (33%), piping (18%) and heat transfer equipment (16% of causes). For other equipment the technical accident causes are most common.The accident contributors were divided to main and sub-contributors. On average process equipment failures have 2.2 contributors. The contributors, which frequent and act often as main contributors, should be focused. These risky contributors were identified for several equipment types. Also a deeper analysis of the accident causes and their interconnections was made. Based on the analysis a checklist of main risk factors was created for hazard identification on different types of equipment.     

Phosphorus removal in a wetland constructed on former arable land

Phosphorus in surface runoff water may cause eutrophication of recipient water. This study clarifies the mechanisms of P removal in the wetland of Hovi, Finland, constructed on arable land in 1998. Before the construction, the surface soil (removed in the construction) and subsoil (the current wetland bottom) were analyzed for Al and Fe oxides (Al(ox) and Fe(ox)) reactive in P sorption, and for the distribution of P between various pools as well as for P exchange properties. Retention of P from runoff water within the wetland was studied from 1999 to 2001 in situ and factors affecting the P removal (O2 availability and P concentration in water) were investigated in a laboratory microcosm. The processes taking place in the wetland diminished by 68% the total P load and by 49% the dissolved reactive P load. Desorption-sorption tests indicated that without removal of the surface soil, there would have been a risk of the wetland being a source of P, since the equilibrium P concentration of the soil removed was high compared with the mean P concentration of the inflowing water. The subsoil contained less P and high amounts of reactive oxides, which could bind P. Evidently, the P sorption by Al(ox) played an important role in a first phase removal of P, since the wetland retained P efficiently even under anoxic conditions, where Fe tends to be reduced. Fine-textured, mineral soil on the bottom of the wetland (subsoil of the former arable land) seemed to be very efficient in retaining P from agricultural runoff.