Spatial Variability of Different Fractions of Particulate Matter within an Urban Environment and between Urban and Rural Sites

ABSTRACT

The spatial variability of different fractions of particulate matter (PM) was investigated in the city of Basel, Switzerland, based on measurements performed throughout 1997 with a mobile monitoring station at six sites and permanently recorded measurements from a fixed site. Additionally, PM₁₀ measurements from the following year, which were concurrently recorded at two urban and two rural sites, were compared.

Generally, the spatial variability of PM₄, PM₁₀, and total suspended particulates (TSP) within this Swiss urban environment (area = 36 km²) was rather limited. With the exception of one site in a street canyon next to a traffic light, traffic density had only a weak tendency to increase the levels of PM. Mean PM₁₀ concentration at six sites with different traffic densities was in the range of less than ±10% of the mean urban PM₁₀ level. However, comparing the mean PM levels on workdays to that on weekends indicated that the impact of human activities, including traffic, on ambient PM levels may be considerable.

Differences in the daily PM₁₀ concentrations between urban and more elevated rural sites were strongly influenced by the stability of the atmosphere. In summer, when no persistent surface inversions exist, differences between urban and rural sites were rather small. It can therefore be concluded that spatial variability of annual mean PM concentration between urban and rural sites in the Basel area may more likely be caused by varying altitude than by distance to the city center.     

Half a century of changing mercury levels in Swedish freshwater fish

The variability of mercury (Hg) levels in Swedish freshwater fish during almost 50 years was assessed based on a compilation of 44 927 observations from 2881 waters. To obtain comparable values, individual Hg concentrations of fish from any species and of any size were normalized to correspond to a standard 1-kg pike [median: 0.69 mg kg^?1 wet weight (ww), mean ± SD: 0.84 ± 0.67 mg kg^?1 ww]. The EU Environmental Quality Standard of 0.02 mg kg^?1 was exceeded in all waters, while the guideline set by FAO/WHO for Hg levels in fish used for human consumption (0.5–1.0 mg kg^?1) was exceeded in 52.5 % of Swedish waters after 2000. Different trend analysis approaches indicated an overall long-term decline of at least 20 % during 1965–2012 but trends did not follow any consistent regional pattern. During the latest decade (2003–2012), however, a spatial gradient has emerged with decreasing trends predominating in southwestern Sweden.     

What have we learnt from the European Union's Emissions Trading System?

The EU Emissions Trading System (ETS) demonstrated the ability to design and launch a large-scale trading system in a short period of time. The path from initial reticence about emissions trading to implementation of the world's largest program is an important history. Three issues play a large role in the evaluation of the program to date and its on-going development: allocation plans, cost uncertainty, and leakage of emissions to abroad. Decisions in Phase I and II (2005-2012) were responsive to questions of political feasibility and implementation, but some of these decisions including allocation in particular will be substantially revised in Phase III (2013-2020).     

Biological alkylation and colloid formation of selenium in methanogenic UASB reactors

Bioalkylation and colloid formation of selenium during selenate removal in upflow anaerobic sludge bed (UASB) bioreactors was investigated. The mesophilic (30 degrees C) UASB reactor (pH = 7.0) was operated for 175 d with lactate as electron donor at an organic loading rate of 2 g COD L(-1) d(-1) and a selenium loading rate of 3.16 mg Se L(-1) d(-1). Combining sequential filtration with ion chromatographic analysis for selenium oxyanions and solid phase micro extraction gas chromatography mass spectrometry (SPME-GC-MS) for alkylated selenium compounds allowed to entirely close the selenium mass balance in the liquid phase for most of the UASB operational runtime. Although selenate was removed to more than 98.6% from the liquid phase, a less efficient removal of dissolved selenium was observed due to the presence of dissolved alkylated selenium species (dimethylselenide and dimethyldiselenide) and colloidal selenium particles in the effluent. The alkylated and the colloidal fractions contributed up to 15 and 31%, respectively, to the dissolved selenium concentration. The size fractions of the colloidal dispersion were: 4 to 0.45 mum: up to 21%, 0.45 to 0.2 mum: up to 11%, and particles smaller than 0.2 mum: up to 8%. Particles of 4 to 0.45 mum were formed in the external settler, but did not settle. SEM-EDX analysis showed that microorganisms form these selenium containing colloidal particles extracellularly on their surface. Lowering the temperature by 10 degrees C for 6 h resulted in drastically reduced selenate removal efficiencies (after a delay of 1.5 d), accompanied by the temporary formation of an unknown, soluble, organic selenium species. This study shows that a careful process control is a prerequisite for selenium treatment in UASB bioreactors, as disturbances in the operational conditions induce elevated selenium effluent concentrations by alkylation and colloid formation.     

Metal homeostasis in Hypogymnia physodes is controlled by lichen substances

The hypothesis was tested that the lichen substances produced by the epiphytic lichen Hypogymnia physodes control the intracellular uptake of divalent transition metals. Incubating lichen thalli with and without their natural content of lichen substances with metal solutions showed that the lichen substances of H. physodes selectively inhibit the uptake of Cu(2+) and Mn(2+), but not of Fe(2+) and Zn(2+). Such behavior is ecologically beneficial, as ambient concentrations of Cu(2+) and Mn(2+) in precipitation and bark are known to limit the abundance of H. physodes, whereas limiting effects of Fe(2+) or Zn(2+) have never been found. This suggests that increasing the Cu(2+) and Mn(2+) tolerance stimulated the evolution of lichen substances in H. physodes. The depsidone physodalic acid is apparently most effective at reducing Cu(2+) and Mn(2+) uptake among the seven lichen substances produced by H. physodes. Probably lichen substances play a general role in the metal homeostasis of lichens.     

Life stage- dependent bioconcentration of a nonylphenol isomer in Daphnia magna

Bioaccumulation is an important aspect for the fate and effects of xenobiotics in the environment. In this study we used a radiolabeled nonylphenol isomer to investigate the bioconcentration in Daphnia magna at different ages. Apart from the total radioactivity we measured the metabolism of p353-NP in D. magna, to calculate the amount of p353-NP compared to total radioactivity found within the daphnids. Bioconcentration factors, based on wet weight, calculated from the rate constants for total radioactivity in neonates and adults were 4271 kg/l and 760 kg/l respectively, leading to a 5.6 deviance in bioconcentration. This deviance was even more pronounced, nearly one order of magnitude, for the p353-NP concentration with bioconcentration factors of 302 kg/l for neonates and 31 kg/l for adults. We were able to describe the bioconcentration for all daphnids by a weight-dependent one- compartment model. These results pointed out that it is not possible to compare bioconcentration experiments conducted with different substances and different sized daphnids. Additionally it was shown that it is not possible to describe the bioconcentration by measuring the total radioactivity. Metabolism of nonylphenol occurs at a very fast rate and bioconcentration is not triggered by the partition between two phases, but by metabolism. Discrimination between the two mechanisms was achieved using radiolabeled substances and a pseudo two-compartment model to describe metabolism and elimination by two rate constants which afterwards can be compared between different substances.     

Dioxin- and POP-contaminated sites—contemporary and future relevance and challenges

BACKGROUND, AIM AND SCOPE: Once they have been generated, polychlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs) and other persistent organic pollutants (POPs) can persist in soils and sediments and in waste repositories for periods extending from decades to centuries. In 1994, the US EPA concluded that contaminated sites and other reservoirs are likely to become the major source of contemporary pollution problems with these substances. With this in mind, this article is the first in a new series in ESPR under the title 'Case Studies on Dioxin and POP Contaminated Sites--Contemporary and Future Relevance and Challenges', which will address this important issue. The series will document various experiences from sites contaminated with PCDD/F and other POPs. This article provides an overview of the content of the articles comprising the series. In addition, it provides a review of the subject in its own right and identifies the key issues arising from dioxin/POP-contaminated sites. Additionally, it highlights the important conclusions that can be drawn from these examples. The key aim of this article and of the series as a whole is to provide a comprehensive overview of the types of PCDD/F contaminated sites that exist as a result of historical activities. It details the various processes whereby these sites became contaminated and attempts to evaluate their contemporary relevance as sources of PCDD/Fs and other POPs. It also details the various strategies used to assess these historical legacies of contamination and the concepts developed, or which are under development, to effect their remediation. MAIN FEATURES: Special sessions on 'Contaminated sites--Cases, remediation, risk and policy' were held at the DIOXIN conferences in 2006 and 2007, and this theme will be continued at DIOXIN 2008 to be held in Birmingham. Selected cases from the approximately 70 contributions made to these sessions, together with some additional invited case studies are outlined together with the key issues they raise. By evaluating these cases and adding details of experiences published in the current literature, an overview will be given of the different features and challenges of dioxin and POP-contaminated sites. RESULTS: This article provides a systematic categorisation of types of PCDD/F and POP-contaminated sites. These are categorised according to the chemical or manufacturing process, which generated the PCDD/Fs or POPs and also includes the use and disposal aspects of the product life cycle in question. The highest historical PCDD/F and dioxin-like polychlorinated biphenyl (PCB) contamination burdens have arisen as a result of the production of chlorine and of chlorinated organic chemicals. In particular, the production of chlorinated pesticides, PCBs and the related contaminated waste streams are identified being responsible for historical releases of toxic equivalents (TEQs) at a scale of many tonnes. Along with such releases, major PCDD/F contaminated sites have been created through the application or improper disposal of contaminated pesticides, PCBs and other organochlorine chemicals, as well through the recycling of wastes and their attempted destruction. In some extreme examples, PCDD/F contaminated sites have also resulted from thermal processes such as waste incinerators, secondary metal industries or from the recycling or deposition of specific waste (e.g. electronic waste or car shredder wastes), which often contain chlorinated or brominated organic chemicals. The examples of PCDD/F and dioxin-like PCB contamination of fish in European rivers or the impact of contaminated sites upon fishing grounds and upon other food resources demonstrate the relevance of these historical problems to current and future human generations. Many of the recent food contamination problems that have emerged in Europe and elsewhere demonstrate how PCDD/F and dioxin like PCBs from historical sources can directly contaminate human and animal feedstuffs and indeed highlight their considerable contemporary relevance in this respect. Accordingly, some key experiences and lessons learnt regarding the production, use, disposal and remediation of POPs from the contaminated sites are summarised. DISCUSSION: An important criterion for evaluating the significance and risks of PCDD/Fs and other POPs at contaminated sites is their present or future potential for mobility. This, in turn, determines to a large degree their propensity for off-site transport and environmental accessibility. The detailed evaluation of contaminated site cases reveals different site-specific factors, which influence the varied pathways through which poor water-soluble POPs can be mobilised. Co-contaminants with greater water solubility are also typically present at such sites. Hence, pumping of groundwater (pump and treat) is often required in addition to attempting to physically secure a site. At an increasing number of contaminated sites, securing measures are failing after relatively short time spans compared to the time horizon, which applies to persistent organic pollutant contamination. Due to the immense costs and challenges associated with remediation of contaminated sites 'monitored natural attenuation' is increasingly gaining purchase as a conceptual remediation approach. However, these concepts may well prove limited in their practical application to contaminated sites containing persistent organic pollutants and other key pollutants like heavy metals. CONCLUSIONS: It is inevitable, therefore, that dioxin/POP-contaminated sites will remain of contemporary and future relevance. They will continue to represent an environmental issue for future generations to address. The securing and/or remediation of dioxin/POP-contaminated sites is very costly, generally in the order of tens or hundreds of millions of dollars. Secured landfills and secured production sites need to be considered as constructions not made for 'eternity' but built for a finite time scale. Accordingly, they will need to be controlled, supervised and potentially repaired/renewed. Furthermore, the leachates and groundwater impacted by these sites will require ongoing monitoring and potential further remediation. These activities result in high maintenance costs, which are accrued for decades or centuries and should, therefore, be compared to the fully sustainable option of complete remediation. The contaminated site case studies highlight that, while extensive policies and established funds for remediation exist in most of the industrialised western countries, even these relatively well-regulated and wealthy countries face significant challenges in the implementation of a remediation strategy. This highlights the fact that ultimately only the prevention of contaminated sites represents a sustainable solution for the future and that the Polluter Pays Principle needs to be applied in a comprehensive way to current problems and those which may emerge in the future. RECOMMENDATIONS AND PERSPECTIVES: With the continuing shift of industrial activities in developing and transition economies, which often have poor regulation (and weak self-regulation of industries), additional global challenges regarding POPs and other contaminated sites may be expected. In this respect, a comprehensive application of the "polluter pays principle" in these countries will also be a key to facilitate the clean-up of contaminated areas and the prevention of future contaminated sites. The threats and challenges of contaminated sites and the high costs of securing/remediating the problems highlight the need for a comprehensive approach based upon integrated pollution prevention and control. If applied to all polluting (and potentially polluting) industrial sectors around the globe, such an approach will prove to be both the cheapest and most sustainable way to underpin the development of industries in developing and transition economies.     

Cytotoxicity of TBBPA and effects on proliferation, cell cycle and MAPK pathways in mammalian cells

Poly-brominated flame retardants are ecotoxicologically relevant chemicals that can show high persistency in environmental samples and bioaccumulation in marine and fresh water animals. One of the most widely used compound is tetrabromobisphenol A (TBBPA). Until today, the toxicological data are rather fragmentary. Our studies on acute and sub-acute toxic effects with established cell lines demonstrate that TBBPA interferes with cellular signaling pathways. Cell viability is significantly reduced in a time- and concentration-dependent manner. The observed EC50 for rat kidney cells (NRK) was 52 microM (27 mg/l), 168 microM (90 mg/l) for A549 human lung cells, and 200 microM (108 mg/l) for Cal-62 human thyroid cells, respectively. The comparison of TBBPA with the non-brominated substance bisphenol A (BPA) clearly demonstrates that only the brominated compound exerts these effects on proliferation and cell viability. Cell cycle regulation was influenced considerably in Cal-62 cells, showing an explicit G2/M arrest in the cell cycle at TBBPA concentrations higher than 75 microM. Cellular signaling pathways directly connected to these affected parameters, e.g. the mitogen activated protein kinase (MAPK) cascades, are partly influenced in a cell specific and dose dependent manner. The extracellular-signal regulated kinase (ERK) is deactivated in NRK and A549 cells and activated in Cal-62 cells with increasing TBBPA concentrations.