Analysis of PM2.5and PM10 in the Atmosphere of Mexico City during 2000-2002

Abstract

During the last 10 years, high atmospheric concentrations of airborne particles recorded in the Mexico City metropolitan area have caused concern because of their potential harmful effects on human health. Four monitoring campaigns have been carried out in the Mexico City metropolitan area during 2000-2002 at three sites: (1) Xalos-toc, located in an industrial region; (2) La Merced, located in a commercial area; and (3) Pedregal, located in a residential area. Results of gravimetric and chemical analyses of 330 samples of particulate matter (PM) with an aerodynamic diameter less than 2.5 μm (PM_2.5) and PM with an aerodynamic diameter less than 10 μm (PM₁₀) indicate that (1) PM_2.5/PM₁₀ average ratios were 0.42, 0.46, and 0.52 for Xalostoc, La Merced, and Pedregal, respectively; (2) the highest PM_2.5 and PM₁₀ concentrations were found at the industrial site; (3) PM_2.5 and PM₁₀ concentrations were lower at nighttime; (4) PM_2.5 and PM₁₀ spatial averages concentrations were 35 and 76 μg/m³, respectively; and (5) when the PM_2.5 standard was exceeded, nitrate, sulfate, ammonium, organic carbon, and elemental carbon concentrations were high. Twenty-four hour averaged PM_2.5 concentrations in Mexico City and Sao Paulo were similar to those recorded in the 1980s in Los Angeles. PM₁₀ concentrations were comparable in Sao Paulo and Mexico City but 3-fold lower than those found in Santiago.     

Removal of pharmaceutical compounds from urban wastewater by an advanced bio-oxidation process based on fungi <Emphasis Type="Italic">Trametes versicolor</Emphasis> immobilized in a continuous RBC system

Conventional wastewater treatment plants (WWTPs) are not able to remove completely some emerging contaminants, such as residual pharmaceutical compounds (PCs) with potential ecotoxicity to water bodies. An advanced bio-oxidation process (ABOP) using white-rot fungi (WRF) has been proposed as alternative biological treatment for degradation of non-biodegradable compounds. A synthetic and real wastewater spiked with 12 PCs at 50 μg L^?1 was treated by means of ABOP based on WRF in a rotating biological contactor (RBC) at 1 day of hydraulic retention time (HRT). The ABOP achieved a remarkable biological performance in terms of TOC removal and reduction of N-NH₄ ⁺ and P-PO₄ ^3? nutrients. Likewise, 5 of the 12 PCs were eliminated with removal efficiencies ranging from 80 to 95%, whereas 6 of 12 PCs were eliminated with removal values ranging from 50 to 70%. The anaerobic digestion of the fungal sludge generated upon the treatment was also evaluated, obtaining a methane yield of 250 mL CH₄ g_VS ^?1. These results evidenced that the proposed ABOP is a promising alternative for the sustainable wastewater treatment of urban effluents, combining advanced oxidation with biological operation for the removal of emerging PCs and energy recovery.     

PCDD/Fs in sprat (Sprattus sprattus balticus) from the Gulf of Finland, the Baltic Sea

The concentrations and congeners pattern of the polychlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs) were determined in sprat collected by the commercial catches in the Gulf of Finland, Baltic Sea. Based on the toxic equivalent concentrations 2,3,4,7,8-PeCDF prevailed among the congeners of PCDD/Fs. The significance of age- and season-specific relationship between the concentration of lipids and dioxins was demonstrated. On lipid weight basis the concentration of PCDDs was significantly higher in spring than in autumn. This difference was not statistically significant for PCDFs. On lipid weight basis the concentration of dioxins decreased with rising content of lipids. PCDD/Fs toxic equivalent concentration increased with the age of sprat exceeding the EU maximum limit value at more than 5-year-old fish.     

Novel approach for assessing heavy metal pollution and ecotoxicological status of rivers by means of passive sampling methods

In order to study the pollution of fluvial ecosystems, it is necessary to analyze not only the levels of chemical contaminants in water, but also those accumulated in the sediment matrix, as well as to assess its ecotoxicological status. Eleven Catalan (Spain) river sections (one sampling point per river) located near urban and industrial areas were sampled during winter of 2009. Water pollutants were collected by using passive samplers as Diffusive Gradient in Thin-Films (DGTs) and Semi-Permeable Membrane Devices (SPMDs). Point water samples were also collected. The concentrations of potentially toxic elements (PTE) in water, filtered water, DGTs and sediment samples were analyzed. Aqueous and organic solvent extracts of sediments samples and organic extracts of SPMDs were performed to assess acute toxicity to Vibrio fischeri by Microtox(?), and chronic toxicity to the green alga Pseudokirschneriella subcapitata. Microtox(?) test was also performed with DGT extracts. The results show that metals content of Catalan river waters are below the freshwater screening US EPA benchmarks, excepting some industrial areas (for Hg, Pb, and Zn). In contrast, sediments levels of some rivers were far above freshwater sediment screening US EPA benchmarks (for Zn, As, Cr, Pb, Ni, Hg, and Mn), particularly in the most industrialized areas. A good correlation was found between toxicity values of extracts (from sediments and DGTs) and PTE levels in sediments. The current results support the suitability of using combined point and passive sampling methods for assessing the chemical and ecotoxicological status of aqueous environments.     

Differences in photosynthetic pigment signatures between phytoneuston and phytoplankton communities in a coastal lagoon of Baja California

In order to understand the relationships between the dynamics of phytoplankton populations in the surface microlayer (MIL) and in the water column below (SSW), this study used high-performance liquid chromatography-derived pigment markers in samples from a coastal lagoon of Baja California (Estero de Punta Banda, EPB) under summer (October 2003) and winter (December 2003) conditions. Photosynthetic pigment signatures of phytoplankton at the air–sea interface (phytoneuston) and subsurface measurements were related to bottom-up (temperature, salinity, nutrient concentrations) and top-down factors (zooplankton abundance). Slicks and scum layers were observed in the inner part of the lagoon and coincided with greater stratification of layers just below the sea surface and lower wind intensities. In general, spatial variability in pigment markers and ancillary data was very high and resulted in non-significant differences between MIL and subsurface samples when different regions of EPB or sampling dates were compared. However, different patterns were found between pigments and environmental factors of MIL and SSW samples when the relative numbers of stations with positive and negative differences (ΔX = X _MIL−X _SSW) were computed. For each survey, pigment markers of phytoneuston and phytoplankton samples were not necessarily correlated. Further analysis revealed that those markers (19′-butanoyloxyfucoxanthin, prasinoxanthin, divinil-chlorophyll a) corresponded to picophytoplankton groups (haptophyte, prasinophyte, and prochlorophyte). On both dates, the MIL was enriched in 19′-hexanoyloxyfucoxanthin (a marker for a type 4 haptophyte) and fucoxanthin (marker for bacillariophytes, haptophytes, and crysophytes) and depleted in peridinin (marker for dinophytes). Different zooplankton grazers accumulated in the MIL (loricate tintinnids) and in SSW (copepod nauplii).     

Carbofuran degraded by iron-doped anatase: Weakening the cholinesterase inhibitory activity in the photoproducts mixture

Carbofuran is a toxic carbamate pesticide, and its use has increased in recent years. While marketing information indicates stability in different chemical media, carbofuran exhibits relative photolability. The aim of this research was to decompose carbofuran and to identify the photoproducts achieved when two different doped titania photocatalysts were employed under UV irradiation. The iron-doped TiO₂ materials were obtained (a) via a hydrothermal method and (b) by an ultrasound-assisted sol–gel method. The precursors were TiOSO₄?xH₂O and Fe₃(NO₃)·9H₂O. X-ray studies confirmed that the anatase phase of the iron-doped TiO₂ resulted from the two preparation methods. The photocatalytic performance of the prepared materials was monitored by LC/ESI-QTOF-MS, enabling the identification of photoproducts: oxo-carbamates, hydroxylated benzofuranes, a carboxamide, and one amine. By using the iron-doped TiO₂ materials, 2,2-dimethyl-2,3-dihydrobenzofuran-3,7-diol was the most abundant photoproduct, and N,2,2-trimethyl-2,3-dihydrobenzofuran-7-amine was the only compound that had not been previously reported in the photolysis and photocatalysis of carbofuran. The product 3-hydroxy carbofuran, a cholinesterase inhibitor, was quantified and was found to be transformed into compounds that lack this inhibitive property.     

Aging and temperature effects on DOC and elemental release from a metal contaminated soil

The combined effect of time and temperature on elemental release and speciation from a metal contaminated soil (Master Old Site, MOS) was investigated. The soil was equilibrated at 10, 28, 45, 70 and 90 degrees C for 2 days, 2 weeks, and 2 months in the laboratory. Dissolved organic carbon (DOC), total soluble elements (by ICP), and labile metals (by DPASV) were determined in the filtered (0.22 microm) supernatants. For the samples equilibrated at 90 degrees C, DOC fractions were size fractionated by filtration and centrifugation; a subsample was only centrifuged while another was also filtered through a 0.45 microm filter. Analyses of the supernatants (ICP, DPASV, DOC) were performed on all size fraction subsamples. Dissolved organic carbon (DOC) increased both with temperature and incubation time; however, metal behavior was not as uniform. In general, total soluble metal release (ICP) paralleled the behavior of DOC, increasing with both time and temperature, and confirming the importance of soil organic matter (SOM) in metal retention. Voltammetric analysis (dpasv) of Cu and Zn showed that very little of these metals remains labile in solution due, presumably, to complexation with dissolved organic matter. Labile concentrations of Cd, on the other hand, constituted a significant portion (50%) of total soluble Cd. Copper and Al increased in solution with time (up to 2 months) and temperature up to 70 degrees C; however, at 90 degrees C the soluble concentration declined sharply. The same behavior was observed after equilibration for longer periods of time (550 days) at lower temperatures (23 and 70 degrees C). While concentrations of labile Cu and total soluble Cu and Al increased in the unfiltered samples, the trend remained the same. DPASV analysis showing shifts in labile Cu complexes with temperature and time, together with the results from the unfiltered samples, lead to the hypothesis that Cu was complexing with large polymers that could form at the elevated temperature, and thus be removed from the analyzed solution. It is possible that Cu and Al released by SOM oxidation has re-sorbed or complexed to more recalcitrant organic matter or to mineral phases. Variations in the relative molecular size fractions present within the DOC pool produced by increased time and temperature may influence the element-DOC complexes present in solution and their behavior in soil environments.     

Congo red dye diversely affects organisms of different trophic levels: a comparative study with microalgae,cladocerans, and zebrafish embryos

Environmental Science and Pollution Research - Global consumption of synthetic dyes is roughly 7?×?105 tons per year, of which the textile industry expends about two-thirds....     

Speaking without words: A meta-analysis of over 70 years of research on the power of nonverbal cues in job interviews

What candidates say in an interview is important—but so is how they say it. We draw on dual-process theory to explain why interviewers rely on individuals' dynamic and static nonverbal cues to evaluate performance with quick, implicit inferences (System 1 processing). Yet, it remains unclear which cues most influence interviewers' judgments and whether moderators affecting interviewers' reliance on System 1 thinking (e.g., interview structure, modality, duration, and interviewee gender) impact the relationship between nonverbal cues and interview ratings. We performed the first meta-analysis to address these questions, integrating findings across 63 studies (N = 4868). The nonverbal cues demonstrating the strongest association with interview performance were professional appearance (ρ = .62), eye contact (ρ = .45), and head movement (ρ = .43). Moderator analyses highlight the persistent power of nonverbal cues, as the results were largely unaffected by interview structure, modality, or duration. Experimental design did play a role, as did interviewees' gender, with stronger effects for certain nonverbal cues (e.g., facial expressions and professional appearance) for women than men, conveying interviewers' reliance on gender-based stereotypes when judging their performance. Overall, these results suggest nonverbal cues and characteristics are an important influence on job applicants' success in employment interviews.