A Comparison of the Effect of Silk Fibroin Nanoparticles and Microfibers on the Reprocessing and Biodegradability of PLA/PCL Blends

Journal of Polymers and the Environment - In this research, the effect of reprocessing on the properties of poly(lactic acid)/poly(ε-caprolactone) (PLA/PCL) blends reinforced with silk...     

A test of the substitution–habitat hypothesis in amphibians

Most examples that support the substitution‐habitat hypothesis (human‐made habitats act as substitutes of original habitat) deal with birds and mammals. We tested this hypothesis in 14 amphibians by using percentage occupancy as a proxy of habitat quality (i.e., higher occupancy percentages indicate higher quality). We classified water body types as original habitat (no or little human influence) depending on anatomical, behavioral, or physiological adaptations of each amphibian species. Ten species had relatively high probabilities (0.16–0.28) of occurrence in original habitat, moderate probability of occurrence in substitution habitats (0.11–0.14), and low probability of occurrence in refuge habitats (0.05–0.08). Thus, the substitution–habitat hypothesis only partially applies to amphibians because the low occupancy of refuges could be due to the negligible human persecution of this group (indicating good conservation status). However, low occupancy of refuges could also be due to low tolerance of refuge conditions, which could have led to selective extinction or colonization problems due to poor dispersal capabilities. That original habitats had the highest probabilities of occupancy suggests amphibians have a good conservation status in the region. They also appeared highly adaptable to anthropogenic substitution habitats.     

Cost–benefit analysis of using sewage sludge as alternative fuel in a cement plant: a case study

Background, aim, and scope  To enforce the implementation of the Kyoto Protocol targets, a number of governmental/international institutions have launched emission trade schemes as an approach to specify CO₂ caps and to regulate the emission trade in recent years. These schemes have been basically applied for large industrial sectors, including energy producers and energy-intensive users. Among them, cement plants are included among the big greenhouse gas (GHG) emitters. The use of waste as secondary fuel in clinker kilns is currently an intensive practice worldwide. However, people living in the vicinity of cement plants, where alternative fuels are being used, are frequently concerned about the potential increase in health risks. In the present study, a cost–benefit analysis was applied after substituting classical fuel for sewage sludge as an alternative fuel in a clinker kiln in Catalonia, Spain. Materials and methods  The economical benefits resulting in the reduction of CO₂ emissions were compared with the changes in human health risks due to exposure to polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) and carcinogenic metals (As, Cd, Co, and Cr) before and after using sewage sludge to generate 20% of the thermal energy needed for pyro-processing. The exposure to PCDD/Fs and metals through air inhalation, soil ingestion and dermal absorption was calculated according to the environmental levels in soil. The carcinogenic risks were assessed, and the associated cost for the population was estimated by considering the DG Environment’s recommended value for preventing a statistical fatality (VPF). In turn, the amount of CO₂ emitted was calculated, and the economical saving, according to the market prices, was evaluated. Results  The use of sewage sludge as a substitute of conventional energy meant a probability cancer decrease of 4.60 for metals and a cancer risk increase of 0.04 for PCDD/Fs. Overall, a net reduction of 4.56 cancers for one million people can be estimated. The associated economical evaluation due to the decreasing cancer for 60,000 people, the current population living near the cement plant, would be of 0.56 million euros (US$ 0.83 million). In turn, a reduction of 144,000 tons of CO₂ emitted between 2003 and 2006 was estimated. Considering a cost of 20 euros per ton of CO₂, the global saving would be 2.88 million euros (US$ 4.26 million). Discussion  After the partial substitution of the fuel, the current environmental exposure to metals and PCDD/Fs would even mean a potential decrease of health risks for the individuals living in the vicinity of the cement plant. The total benefit of using sewage sludge as an alternative fuel was calculated in 3.44 million euros (US$ 5.09 million). Environmental economics is becoming an interesting research field to convert environmental benefits (i.e., reduction of health risks, emission of pollutants, etc.) into economical value. Conclusions  The results show, that while the use of sewage sludge as secondary fuel is beneficial for the reduction in GHG emissions, no additional health risks for the population derived from PCDD/F and metal emissions are estimated. Recommendations and perspectives  Cost–benefit analysis seems to be a suitable tool to estimate the environmental damage and benefit associated to industrial processes. Therefore, this should become a generalized practice, mainly for those more impacting sectors such as power industries. On the other hand, the extension of the study could vastly be enlarged by taking into account other potentially emitted GHGs, such as CH₄ and N₂O, as well as other carcinogenic and non-carcinogenic micropollutants.     

Effects of public health interventions on industrial emissions and ambient air in Cartagena, Spain

Background, aim, and scope

Ten years of public health interventions on industrial emissions to clean air were monitored for the Mediterranean city of Cartagena. During the 1960s, a number of large chemical and non-ferrous metallurgical factories were established that significantly deteriorated the city’s air quality. By the 1970s, the average annual air concentration of sulfur dioxide (SO₂) ranged from 200 to 300 µg/m³ (standard conditions units). In 1979, the Spanish government implemented an industrial intervention plan to improve the performance of factories and industrial air pollution surveillance. Unplanned urban development led to residential housing being located adjacent to three major factories. Factory A produced lead, factory B processed zinc from ore concentrates, and factory C produced sulfuric acid and phosphates. This, in combination with the particular abrupt topography and frequent atmospheric thermal inversions, resulted in the worsening of air quality and heightening concern for public health. In 1990, the City Council authorized the immediate intervention at these factories to reduce or shut down production if ambient levels of SO₂ or total suspended particles (TSP) exceeded a time-emission threshold in pre-established meteorological contexts. The aim of this research was to assess the appropriateness and effectiveness of the intervention plan implemented from 1992 to 2001 to abate industrial air pollution.

Materials and methods

The maximum daily 1-h ambient air level of SO₂, NO₂, and TSP pollutants was selected from one of the three urban automatic stations, designed to monitor ambient air quality around industrial emissions sources. The day on which an intervention took place to reduce and/or interrupt industrial production by factory and pollutant was defined as a control day, and the day after an intervention as a post-control day. To assess the short-term intervention effect on air quality, an ecological time series design was applied, using regression analysis in generalized additive models, focusing on day-to-day variations of ambient air pollutants levels. Two indicators were estimated: (a) appropriateness, the ratio between mean levels of the pollutant for control days versus the other days, and (b) effectiveness, the ratio between mean levels of the pollutant for post-control days versus the other days. Ratios in regression analyses were adjusted for trend, seasonality, temperature, humidity and atmospheric pressure, calendar day, and special events as well as the other pollutants.

Results

A total of 702 control days were made on the factories’ industrial production during the 10-year period. Fifteen reductions and five shutdown control days took place at factory A for ambient air SO₂. At factory B, more controls were carried out for the SO₂ pollutant in the years 1992–1993 and 1997. At factory C, the control days for SO₂ decreased from 59 reductions and 14 shutdowns to a minimum from 1995 onwards, whereas the controls on TSP were more frequent, reaching a maximum of 99 reductions and 47 shutdowns in the last year. SO₂ ambient air mean levels ranged from 456 to 699 µg/m³ among factories on reduction control days and between 624 and 1,010 µg/m³ on shutdown days. The TSP ambient air mean levels were 428 and 506 µg/m³ on reduction and shutdown days, respectively. For all types of control days and factories, a mean ratio of 104% (95% confidence interval [CI] 88 to 121) in SO₂ levels was obtained and a mean ratio of 67% (95% CI 59 to 75) in TSP levels. Post-control days at all factories showed a mean ratio of ?16% (95% CI ?7 to ?24) in SO₂ levels and a mean ratio of ?13% (95% CI ?7 to ?19) in TSP levels.

Discussion

Interventions on industrial production based on the urban SO₂ and TSP ambient air levels were justified by the high concentrations detected. The best assessment of the interventions’ effectiveness would have been to utilize the ambient air pollutant concentration readings from the entire time of the production shutdowns or reductions; however, the daily hourly maximum turned out to be a useful indicator because of meteorological factors influencing the diurnal concentration profile. A substantial number of interventions were carried out from 1 to 3 am, when vehicular traffic was minimum. On the other hand, atmospheric stability undergoes diurnal cycling in the autumn–winter period due to thermal inversion, which reaches maximum levels around daybreak. Therefore, this increases the ambient air levels and justified the interventions carried out at daybreak in spite of the traffic influence.

Conclusions

All the interventions for SO₂ and TSP were carried out when the measured ambient air levels of pollutants were exceeded, which shows the appropriateness of the intervention program. This excess was greater when intervening on SO₂ than on the TSP levels. For both ambient air levels of SO₂ and TSP, significant drops in air pollution were achieved from all three factories following activity reductions. The production shutdown controls were very effective, because they returned excess levels, higher than in the reduction controls, to everyday mean values.

Recommendations and perspectives

The Cartagena City observational system of intermittent control has proven to effectively reduce industrial emissions’ impact on ambient air quality. This experienced model approach could serve well in highly polluted industrial settings. From a public health perspective, studies are needed to assess that the industrial interventions to control air pollution were related to healthier human populations. Legislation was needed to allow the public administration to take direct actions upon the polluting industries.     

Long-term environmental monitoring of persistent organic pollutants and metals in a chemical/petrochemical area: human health risks

Organic pollutants such as polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), polychlorinated biphenyls (PCBs), polychlorinated naphthalenes (PCNs) and polycyclic aromatic hydrocarbons (PAHs), as well as some metals are periodically monitored in soil and vegetation samples collected in Tarragona County (Spain). We here report the temporal trends of the concentrations of the above pollutants between the initial survey (2002) and that recently (2009) performed. The area under evaluation was divided into 4 sections (chemical, petrochemical, urban/residential and unpolluted). In general terms, urban soils presented the highest concentrations of PCDD/Fs, PCNs and PAHs, confirming that traffic is a very important emission source of these pollutants. In addition, substantially higher levels of PAHs and some metals were found in vegetation samples from the petrochemical complex. The assessment of health risks of these contaminants indicated that the current concentrations of micropollutants did not mean additional non-carcinogenic or cancer risks for the population living in the zone.     

Impact of nonaqueous phase liquid (NAPL) source zone architecture on mass removal mechanisms in strongly layered heterogeneous porous media during soil vapor extraction

An existing multiphase flow simulator was modified in order to determine the effects of four mechanisms on NAPL mass removal in a strongly layered heterogeneous vadose zone during soil vapor extraction (SVE): a) NAPL flow, b) diffusion and dispersion from low permeability zones, c) slow desorption from sediment grains, and d) rate-limited dissolution of trapped NAPL. The impacts of water and NAPL saturation distribution, NAPL-type (i.e., free, residual, or trapped) distribution, and spatial heterogeneity of the permeability field on these mechanisms were evaluated. Two different initial source zone architectures (one with and one without trapped NAPL) were considered and these architectures were used to evaluate seven different SVE scenarios. For all runs, slow diffusion from low permeability zones that gas flow bypassed was a dominant factor for diminished SVE effectiveness at later times. This effect was more significant at high water saturation due to the decrease of gas-phase relative permeability. Transverse dispersion contributed to fast NAPL mass removal from the low permeability layer in both source zone architectures, but longitudinal dispersion did not affect overall mass removal time. Both slow desorption from sediment grains and rate-limited mass transfer from trapped NAPL only marginally affected removal times. However, mass transfer from trapped NAPL did affect mass removal at later time, as well as the NAPL distribution. NAPL flow from low to high permeability zones contributed to faster mass removal from the low permeability layer, and this effect increased when water infiltration was eliminated. These simulations indicate that if trapped NAPL exists in heterogeneous porous media, mass transfer can be improved by delivering gas directly to zones with trapped NAPL and by lowering the water content, which increases the gas relative permeability and changes trapped NAPL to free NAPL.     

Solid waste management in Bogotá: the role of recycling associations as investigated through SWOT analysis

In emerging economies, recycling provides an opportunity for cities to increase the lifespan of sanitary landfills, to reduce the costs of solid waste management, to decrease environmental problems from waste treatment by reincorporating waste into the productive cycle and to protect and develop the livelihoods of citizens who work as informal waste pickers. However, few studies have analysed the possibilities of and strategies for integrating the formal and informal sectors in solid waste management for the benefit of both. This integration is the key, especially in developing countries, to understanding how the recycling population can develop a business despite their social and economic limitations. The aim of this study was to perform a strength, weakness, opportunity and threat (SWOT) analysis of three recycling associations in Bogotá with the aim of examining and understanding the recycling situation from the perspective of members of the informal sector in their transition to becoming authorised waste providers. This issue has rarely been studied in the context of developing countries. The data used in the analysis are derived from multiple sources, including a literature review, Bogota’s recycling database, focus group meetings, governmental reports, national laws and regulations and interviews with key stakeholders. The results of this study show that as the primary stakeholders, the formal and informal waste management sectors can identify the internal and external conditions of recycling in Bogotá. Several strategies were designed based on the SWOT analysis. The participation of recycling associations is important in the design and application of waste policy, the consolidation of recycling through an effective business model, promotional programmes for social inclusion and the development of new transformation processes and technologies to valorise recycling materials. In conclusion, recycling associations can become authorised waste providers through a profitable business that increases recycling rates to create a productive process from waste during the generation of new materials and to decrease environmental problems while improving the welfare and living conditions of recyclers. These findings are important for Bogotá to advance and promote recycling as a key strategy for integrated sustainable waste management in the city.     

Functional group influences on the reactive azo dye decolorization performance by electrochemical oxidation and electro-Fenton technologies

Electrochemical water treatment technologies are highly promising to achieve complete decolorization of dyebath effluents, as demonstrated by several studies reported in the literature. However, these works are focused on the treatment of one model pollutant and generalize the performances of the processes which are not transposable since they depend on the pollutant treated. Thus, in the present study, we evaluate, for the first time, the influence of different functional groups that modify the dye structure on the electrochemical process decolorization performance. The textile azo dyes Reactive Orange 16, Reactive Violet 4, Reactive Red 228, and Reactive Black 5 have been selected because they present the same molecular basis structure with different functional groups. The results demonstrate that the functional groups that reduce the nucleophilicity of the pollutant hinder the electrophilic attack of electrogenerated hydroxyl radical. Thereby, the overall decolorization efficiency is consequently reduced as well as the decolorization rate. Moreover, the presence of an additional chromophore azo bond in the molecule enhances the recalcitrant character of the azo dyes as pollutants. The formation of a larger and more stable conjugated π system increases the activation energy required for the electrophyilic attack of ^?OH, affecting the performance of electrochemical technologies on effluent decolorization.     

Raw sugarcane bagasse as carbon source for xylanase production by Paenibacillus species: a potential degrader of agricultural wastes

Environmental Science and Pollution Research - Paenibacillus species isolated from a variety of natural sources have shown to be important glycoside hydrolases producers. These enzymes play a key...     

‘Been There Done That’: Disentangling Option Value Effects from User Heterogeneity When Valuing Natural Resources with a Use Component

Endogeneity bias arises in contingent valuation studies when the error term in the willingness to pay (WTP) equation is correlated with explanatory variables because observable and unobservable characteristics of the respondents affect both their WTP and the value of those variables. We correct for the endogeneity of variables that capture previous experience with the resource valued, humpback whales, and with the geographic area of study. We consider several endogenous behavioral variables. Therefore, we apply a multivariate Probit approach to jointly model them with WTP. In this case, correcting for endogeneity increases econometric efficiency and substantially corrects the bias affecting the estimated coefficients of the experience variables, by isolating the decreasing effect on option value caused by having already experienced the resource. Stark differences are unveiled between the marginal effects on WTP of previous experience of the resource in an alternative location versus experience in the location studied, Newfoundland and Labrador (Canada).