Integrated pollution evaluation of the Tagus River in Central Spain

The aim of this study was to integrate hydrochemical and sediment data in order to obtain a picture of the pollution state of the Tagus River along central Spain. This area is of special interest because tributaries from the Madrid region are discharged and no previous data were available. Waters and sediments were sampled between 2002 and 2004 from selected sites before and after Jarama River confluence (Madrid city input). The samples were analysed for more than 50 parameters, including those of physico-chemical nature and those reporting the pollution caused by both metals and organic compounds. The quality of waters for different uses has been tested and statistical quality indexes of both global and partial type has also been established. Sediments pollution state was evaluated by comparison with general quality standards. A high degree of pollution and general degradation was observed in the Tagus River downstream the Jarama River input. The pollution of waters is mainly related to parameters indicators of organic pollution from urban sewage. In sediments, a dramatic increase in the concentration of trace metals was found in different points, exceeding toxicological threshold. Further studies would be necessary for organic pollutants and also to evaluate the remobilization potential.     

Review of monitoring and assessing ground vegetation biodiversity in national forest inventories

Ground vegetation (GV) is an important component from which many forest biodiversity indicators can be estimated. To formulate policies at European level, taking into account biodiversity, European National Forest Inventories (NFIs) are one of the most important sources of forest information. However, for monitoring GV, there are several definitions, data collection methods, and different possible indicators. Even though it must be considered that natural conditions in different countries form very different understory types, each one has its own cost-efficient monitoring design, and they can hardly be compared. Therefore, the development of general guidelines is a particularly complex issue. This paper is a review of data collection methods and consequently a selection of the best available methods for the set of indicators with an emphasis on GV sampling methodologies in NFIs. As a final result, recommendations on GV definitions and classifications, sampling methodologies, and indicators are formulated for NFIs. Different sampling areas are recommended for each life form (shrubs, herbs, etc.). Inventory cycles and sampling seasons (depending on the phonological stages) should be specially considered and evaluated in the results. The proposed indicators are based on composition at different levels of sampling intensity for each life form and on coverage measurements.     

Evaluation of soil contamination in intensive agricultural areas by pesticides and organic pollutants: south-eastern Spain as a case study

A comprehensive survey of the occurrence and fate of pesticides and organic contaminants in soils from an intensive agricultural area devoted to horticultural production in plastic-based greenhouses has been performed to determine if the operation under integrated pest management practices has contributed to reduce the levels of these compounds. Almería province (south-eastern Spain) was selected for the case study. 38 agricultural soil samples (each sample corresponds to an independent private greenhouse) of areas working under integrated pest management (IPM) programs have been analyzed in order to evaluate their contamination fate. Sampling was designed to cover an area of about 400 km(2). Pesticides, polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), phenolic compounds and di-(2-ethylhexyl)phthalate (DEHP) were monitored. The obtained results were compared to other studies reported in Spain and Europe. Among relevant persistent pesticides, DDTs and endosulfans were mainly found and the results indicated historical application, although recent application of endosulfan was rarely detected. PAHs were also found but to a lesser extent and derived from pyrogenic sources. DEHP levels were considerably higher in comparison to the other monitored analytes. The evaluation revealed that despite the use of IPM programs, pesticide and organic contaminants are still being detected in this type of agricultural soil, although at relatively low concentration levels. In general, the contamination rate was similar or lower in comparison to other agricultural areas from nearby regions or countries. However, further monitoring studies should be carried out to establish the possible reduction in contamination by the selected compounds.     

Effectiveness of three configurations of membrane bioreactors on the removal of priority and emergent organic compounds from wastewater: comparison with conventional wastewater treatments

In this work the effectiveness of membrane bioreactors as advanced treatment on the removal of emergent and priority organic compounds in wastewater treatment plants has been evaluated during a one-year monitoring study. The studied wastewater treatment plant operates with flat sheet and hollow fibre membranes in two parallel lines. Moreover, a reverse osmosis module connected in series after the hollow fibre membrane was evaluated for one month. Comparison of membrane bioreactor and conventional activated sludge treatment was also investigated, as well as the influence of the physicochemical properties of the compounds on the removal rates achieved. Sixteen pharmaceutical compounds belonging to seven therapeutic groups and eight priority organic pollutants, including linear alkylbenzene sulfonates, nonylphenol and its ethoxylates and phthalate, were monitored. The highest mean concentrations corresponded to priority organic pollutants (309 μg L(-1) of linear alkylbenzene sulfonate C(12)) followed by pharmaceutical compounds (24.5 μg L(-1) of ibuprofen). No significant difference of effectiveness was found among flat sheet and hollow fibre membranes. However, an improvement was obtained with the addition of a reverse osmosis module for most of the compounds. Biodegradation has been shown as the main route involved in the removal of organic compounds during both technologies.     

Influence of temperature changes on ambient air NO<Subscript>x</Subscript> chemiluminescence measurements

Users of automatic air pollution monitors are largely unaware of how certain parameters, like temperature, can affect readings. The present work examines the influence of temperature changes on chemiluminescence NO(x) measurements made with a Thermo Scientific 42i analyzer, a model widely used in air monitoring networks and air pollution studies. These changes are grouped into two categories according to European Standard EN 14211: (1) changes in the air surrounding the analyzers and (2) changes in the sampled air. First, the sensitivity tests described in Standard EN 14211 were performed to determine whether the analyzer performance was adapted to the requirements of the standard. The analyzer met the performance criteria of both tests; however, some differences were detected in readings with temperature changes even though the temperature compensator was on. Sample temperature changes were studied more deeply as they were the most critical (they cannot be controlled and differences of several tens of degrees can be present in a single day). Significant differences in readings were obtained when changing sample temperature; however, maximum deviations were around 3% for temperature ranges of 15°C. If other possible uncertainty contributions are controlled and temperature variations with respect to the calibration temperature are not higher than 15°C, the effect of temperature changes could be acceptable and no data correction should have to be applied.     

Prevention through design: The effect of European Directives on construction workplace accidents

Workplace accidents still occur with distressing frequency, particularly in construction. Industrialized countries have become increasingly aware of this situation and have adopted policies to attempt to deal with this issue. Such policies have led to the development of new laws and regulations with a view to improving workplace conditions.This paper first analyzes policies regarding accident prevention in the European Union, as initially stipulated in the European Framework Directive 89/391/EEC, and more specifically in Directive 92/57/EEC, on the implementation of minimum safety and health requirements at temporary or mobile construction sites, concentrating on prevention through design. Whilst designers previously had some responsibilities for reducing risk under common law provisions in many countries, this directive was the first explicit legislation to enforce particular duties upon them. The adaptation of the provisions in this directive to the national legislation of EU member countries is also studied.The second section of the paper analyzes the incidence rate of workplace accidents in the construction sector in each country from the year when these regulations came into force until the present time. Based on the evolution of these accident rates, the paper postulates the extent to which European policies have contributed to accident prevention in construction. It is now more than a decade since this legislation has been in force which provides a suitable period for a reflective analysis on it is impact.     

Amino-Modified Halloysite Nanotubes to Reduce Polymer Degradation and Improve the Performance of Mechanically Recycled Poly(lactic acid)

From an environmental point of view, mechanical recycling is, in general, a good end-of-life option for poly(lactic acid) (PLA), one of the most important biobased polymers. However, the degradation of PLA during the service life and, especially, during the mechanical recycling process, leads to a decrease in the properties of PLA, thus reducing the applications of the recycled plastic. The main aim of this work was to study the addition of small amounts of halloysite nanotubes, during the recycling step, as the basis of a cost-effective method for improving the properties of the recycled PLA. Raw halloysite was modified with an aminosilane, and 2% by weight of both raw and modified halloysite were melt compounded with PLA previously subjected to accelerated ageing. The addition of the nanotubes led to recycled materials with improved properties because halloysite reduces the degradation of PLA by blocking the carboxyl groups, generated during the ageing and washing steps, which catalyze the degradation during the recycling process. This effect was more intense in the silanized nanotubes, because the carboxyl groups were effectively blocked by acid–base interactions with the amino groups of the chemical modification. The properties of the recycled plastic with only 2 wt% of silanized halloysite were very close to those of the virgin plastic.     

Kinetic analysis of the anaerobic digestion of untreated vinasses and vinasses previously treated with Penicillium decumbens

A kinetic study was carried out on the anaerobic digestion of untreated vinasses and vinasses previously fermented with Penicillium decumbens. Two 1-l volume continuous-flow stirred tank reactors (CFSTR) operating at mesophilic temperature (35 degrees C) were used for the study. One reactor was fed with untreated vinasses (COD concentration of 80.5 g/l) and the other with vinasses previously fermented (COD concentration of 23.0 g/l). Both reactors were operated at organic loading rates in the range of 1.5-7.5 g chemical oxygen demand (COD)/l-d. The results obtained were evaluated using the Chen-Hashimoto methane production model to determine the values of the maximum specific growth rate (micromax) and the model kinetic constant (K) of the process for each case studied. The kinetic constants (micromax and K) were affected by the pre-treatment, and the respective values were 9.6 and 6.9 times higher for pretreated vinasses than those of untreated vinasses. This was significant at the 95% confidence level. This behaviour is believed to be due to the lower levels of phenolic compounds present in the pretreated vinasses, as compared to untreated vinasses, resulting in an improved process performance, kinetics and stability. Finally, the experimental values of methane production were reproduced with deviations equal to or less than 4% and 10% for pretreated and untreated vinasses, respectively.     

A study of the natural biodegradation of two-phase olive mill solid waste during its storage in an evaporation pond

A study of the natural biodegradation of two-phase olive mill solid waste (OMSW) during its storage in an evaporation pond was carried out. This system is traditionally used as the final disposal of this waste or constitutes a previous stage before being processed by cogeneration or anaerobic digestion processes. A laboratory-scale pond with a total volume of 520 l was used. The experiment was carried out between December 2002 and August 2003 covering a total period of 269 days. During the experiment, the variations of temperature (outside and inside the pond), the effective volume of the OMSW in the pond, moisture content, total solids (TS), volatile solids (VS), the total chemical oxygen demand (TCOD), total volatile acids (TVA), pH and cumulative methane production as a function of the operation time were evaluated. The experimental results obtained showed that the characteristics of the two-phase OMSW in the pond were dependent on the time of operation and temperature. During the experiment, three periods were clearly observed and differentiated: (a) An initial period with a rapid reduction of moisture content and effective volume, with an increase of TS, VS and TCOD removals, a decrease of pH and an increase of TVA and methane production until day 21. (b) A second period of slow decrease of moisture content and effective volume, due to the decrease of the ambient temperature. This period took place between day 21 and days 120-150 of assay, and it was characterised by a slight change in the OMSW properties. (c) A third period where the characteristics of the waste in the pond changed considerably due to the increase of the temperature outside the pond. The methane gas production also showed an increase due to the increase of methanogenic activity with the increase of temperature. An empirical model to describe the changes of two-phase OMSW characteristics and methane production with the operation time was developed. The proposed model, based on the use of polynomial equations, took into account the influence of the temperature and fit adequately into the experimental results obtained. It was found that the pond could probably be used as preliminary treatment of two-phase OMSW before its anaerobic digestion process, because a maximum conversion of organic matter to TVA was obtained after an operation time of around 200 days.