Effects of solar radiation on the fluorescence properties and molecular weight of fulvic acids from pulp mill effluents

The pulp and paper industry generates large volume of wastewater that adversely affects water resources. Lignin derived macromolecular compounds, similar to natural humic substances, are the main waste products in the pulp mill effluents. The UV-Vis and fluorescence spectroscopies were used to assess the effect of solar exposition on fulvic acids from a kraft pulp mill effluent. Solar irradiation of the solutions of these fulvic acids caused solution acidification and decay both in the UV-Vis absorbance and in the fluorescence. This decay was not the same for the whole spectra but pointed to the selective photodegradation of lignin typical structures. Furthermore, by sequential ultrafiltration it was found that during irradiation, the high-molecular weight fractions were destroyed and low-molecular-weight constituents, potentially more able to penetrate the cell membranes of living organisms were formed. Photodegradation of macromolecular organic matter from a kraft pulp mill effluent may be a key process occurring in natural waters that modifies the physicochemical properties of such effluents.     

Estimating the environmental impact of micro-pollutants in the low Ebro River (Spain): an approach based on screening toxicity with Vibrio fischeri

The aim of this study was to assess the likely impacts on the ecosystems due to agricultural, human, and industrial activities carried out in an ecologically important area of the Ebro River (Spain). For it, a screening site specific ecological risk assessment was conducted. Considering the presence of high levels of potentially toxic substances, such as metals and chlorinated organic compounds, aqueous and organic extracts were used to assess toxicity in sediments by using the photo-luminescent bacteria Vibrio fischeri (Microtox) as screening response variable. Sediment samples collected during 2005-2006 in the last course of the Ebro River and its Delta have been analyzed. Toxic responses have shown strong relationships to the levels of pollutants in the area. Moreover, various sites presented some toxicity level, probably because of other factors associated with reducing environments into the sediments. Results indicate that Microtox bioassay is an appropriate tool to perform risk assessment studies at screening level.     

Species-dependent chromium accumulation, lipid peroxidation, and glutathione levels in germinating kiwifruit pollen under Cr(III) and Cr(VI) stress

The accumulation of chromium by germinating kiwifruit pollen appears to be significantly affected by Cr species, Cr concentration and calcium availability. Cr(III) accumulation always occurred in a linear manner while Cr(VI) uptake followed a logarithmic model. In the absence of exogenous calcium, Cr(III) accumulation was much higher than that of Cr(VI). It was observed that, as the Cr(III) concentration increased, there was a significant decrease in the endogenous calcium content of pollen, ultimately leading to complete calcium depletion after 90 min of incubation at 150 microM Cr(III). This loss of calcium could be responsible for the strong inhibition of tube emergence and growth following exposure of pollen to Cr(III). Indeed, when exogenous calcium was added to the kiwifruit pollen culture medium, significant growth recovery and reduced Cr(III) uptake occurred; the opposite was true in Cr(VI)-treatments. A significant rise in lipid peroxide production occurs in the presence of both Cr species; the effect was more pronounced following Cr(VI) exposure. Finally, glutathione pool dynamics appears to be differentially affected by chromium species and concentrations. In conclusion, results of the present study have provided important information regarding the different activity profiles of Cr(III) and Cr(VI) in relation to kiwifruit pollen performance, and have also demonstrated differences in some biochemical responses of pollen to metal stress.     

Concentrations of PCDD/PCDFs in plasma of subjects living in the vicinity of a hazardous waste incinerator: follow-up and modeling validation

In 2007, the concentrations of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/PCDFs) were determined in plasma of non-occupationally exposed subjects living near the only hazardous waste incinerator (HWI) in Spain (Constantí, Tarragona County, Catalonia). These data were compared with the levels found in two previous surveys performed in 1998 (baseline) and 2002. The current mean PCDD/PCDF concentration in plasma was 9.36pg I-TEQg(-1) of lipid (range: 1.76-23.44pg I-TEQg(-1) of lipid). It means a significant reduction of the mean PCDD/PCDFs levels in plasma in comparison to the concentrations found in 1998 and 2002 (27.01 and 15.70pg I-TEQg(-1) of lipid, respectively). This important decrease agrees well with the notable reduction in the dietary intake of PCDD/PCDFs recently noted for the population of the same area (210.1pg I-TEQd(-1), 63.8pgWHO-TEQd(-1), and 27.8pgWHO-TEQd(-1), in 1998, 2002 and 2007, respectively). The current data were also used to predict theoretical PCDD/PCDF concentrations in plasma by executing a single-compartment empirically-based pharmacokinetic model on the basis of the daily intake of these pollutants by the local population.     

Rhizosphere localized cationic peroxidase from barley roots is strongly activated by cadmium and correlated with root growth inhibition

The activity of Cd-induced POD isozyme isolated from the surface of intact barley roots growing under some abiotic stress conditions (toxic metals: Al, Co, Cu, Hg; drought, NaCl, extreme temperatures: heat, cold) and compounds activating (2,4-D) or inhibiting (SHAM) POD activity as well as H(2)O(2) and H(2)O(2) scavenger (DTT) was characterized. Strong Cd concentration-dependent accumulation of one cationic POD isozyme was observed on PAGE, which correlated with Cd- and other stress induced root growth inhibition. This isoPOD is basic with isoelectric point about 9 and its localization is restricted only to the apical part of the barley root tip.     

Ozone stress and antioxidant substances in Trifolium repens and Centaurea jacea leaves

Ozone-sensitive (NC-S clone) and resistant plants (NC-R clone) of Trifolium repens and Centaurea jacea were exposed to moderate ozone concentrations in ambient air. The aim of this study was the investigation of the relation between ozone-sensitivity and leaf concentrations of antioxidants (ascorbic acid, total phenolics and total antioxidant capacity). NC-R clone showed the highest concentrations of antioxidants with 50-70% more ascorbic acid than NC-S. NC-R had about 5 times more ascorbic acid in the young leaves and 9 times more in the old leaves than Centaurea. In a fumigation experiment with acute ozone stress (100 nl L(-1)) the antioxidant levels changed profoundly. The ozone-injured leaves of NC-S had 6-8 times more total phenolics than uninjured leaves. Generally older leaves had lower antioxidant concentrations and were more prone to ozone injury than younger leaves. Ascorbic acid concentrations were closer related to the appearance of visible ozone injury than the other antioxidative parameters.     

Depuration of PCBs and DDTs in mullet under captivity clean conditions

Contaminated mullet (Mugil cephalus) from Douro estuary was allowed to depurate in clean water and fed with uncontaminated food. Levels of PCBs and DDTs in muscle and liver, and ethoxyresorufin O-deethylase (EROD) activity were measured at day 0, 21, 120 and 270. In specimens captured in the estuary total PCB and total DDT concentrations were 311 and 65 ng g(-1) in muscle and 686 and 115 ng g(-1) in liver, respectively. At day 21, after an initial 10-15 days period of starvation, organochlorines levels increased in both analyzed tissues. Thereafter levels of all PCB congeners and DDT compounds decreased in muscle, and at the end of the 270 days were 49 ng g(-1) and 13 ng g(-1), respectively. These decreases were correlated to the lipids consumption. In liver no relationship between those variables was observed, suggesting different elimination processes and eventual exchange of contaminants between muscle and liver. EROD activities decreased in the first days of depuration experiment, but showed no relations with analysed organochlorines.     

Evaluation of genotoxicity and toxicity of water and sediment samples from a Brazilian stream influenced by tannery industries

This paper reports results of genotoxicity and toxicity studies of water and sediment samples collected from the Estancia Velha stream of southern Brazil, a stream transporting both domestic sewage and effluents from regional factories working in the leather industry. Three sites were selected: in the stream headwaters (Site 1), located downstream of an urban area (Site 2), and near the basin outfall (Site 3). Results obtained with Allium cepa showed no evidence of chromosomal mutation, either in water or in sediment, during winter or summer seasons, but samples collected below Site 1 showed high toxicity. Physical and chemical analyses showed high concentrations of pollutants at these sites. Ecotoxicity tests with Daphnia magna and Ceriodaphnia dubia measured toxicity in water from Sites 2 and 3 in summer 2004. A toxic effect on Hyalella azteca was only found in sediment from Site 3 during winter 2003 and summer 2004. The results suggest that the synergy among different compounds in domestic and industrial sewage discharges can make it difficult to maintain system stability.     

A prototype printer for laser driven micro-transfer printing

This paper demonstrates a new mode of automated micro transfer printing called laser micro transfer printing (LμTP). As a process, micro-transfer printing provides a unique and critical manufacturing route to extracting active microstructures from growth substrates and deterministically assembling them into a variety of functional substrates ranging from polymers to glasses and ceramics and to metallic foils to support applications such as flexible, large-area electronics, concentrating photovoltaics and displays. Laser transfer printing extends micro-transfer printing technology by providing a non-contact approach that is insensitive to the preparation and properties of the receiving substrate. It does so by exploiting the difference in the thermo-mechanical responses of the microstructure and transfer printing stamp materials to drive the release of the microstructure or ‘ink’ from the stamp and its transfer to substrate. This paper describes the process and the physical phenomena that drive it. It focuses on the use of this knowledge to design and test a print head for the process. The print head is used to demonstrate the new printing capabilities that LμTP enables.     

Virological Characterization of Roof-Harvested Rainwater of Densely Urbanized Low-Income Region

Food and Environmental Virology - Roof-harvested rainwater (RHRW) is considered relatively clean water, even though the possible presence of pathogens in the water may pose human health risks. In...