The oldest known tracks of web-footed birds from the Lower Cretaceous of South Korea

 We describe the oldest tracks of web-footed birds from the Early Cretaceous in South Korea. The tracks are characterized by a wide divarication angle and a long reversed hallux. The web is semipalmate and restricted to the proximal portion of the three forward digits. The tracks from the Early Cretaceous in South Korea are smaller than those of the Late Cretaceous, therefore confirming the trend of size increasing in the early evolution of birds as shown by skeletal fossils. The discovery of web-footed tracks with abundant non-web-footed tracks indicates that there was a considerable diversification of shore birds as early as the Early Cretaceous. Received: 4 November 1999 / Accepted in revised form: 28 February 2000     

Postnatal confirmation of prenatally diagnosed trisomy 16 mosaicism in two phenotypically abnormal liveborns

Two phenotypically abnormal liveborns in whom trisomy 16 mosaicism was diagnosed prenatally by amniocentesis are described. Analysis of a percutaneous umbilical blood sample in one case revealed a normal chromosomal complement. Ultrasound examinations performed at the time of amniocentesis were normal. Serial sonography during the late second and third trimesters demonstrated progressive intrauterine growth retardation (IUGR) in both fetuses and a cardiac defect in one. At birth, both infants had dysmorphic features and multiple congenital anomalies. Trisomy 16 mosaicism was confirmed postnatally in both infants in skin fibroblasts; however, peripheral blood samples contained only chromosomally normal cells. The two mosaic trisomy 16 cases described in this report, together with the five confirmed cases reported previously, demonstrate the need for caution in the counselling of patients when trisomy 16 mosaicism is diagnosed prenatally in amniotic fluid samples. Such cases potentially can result in the birth of dysmorphic infants with significant birth defects, growth retardation, and possible developmental disabilities.     

Chlorinated hydrocarbons and shell thinning in eggs of (Accipiter) hawks in Ontario, 1986-1989

Eggs of sharp-shinned hawks (Accipiter striatus), Cooper's hawks (A. cooperii), and northern goshawks (A. gentilis) were collected from nests in south-central Ontario from 1986 to 1989. Detectable levels of the chlorinated hydrocarbons DDE, DDT, DDD, mirex, photomirex, cis-nonachlor, trans-nonachlor, oxychlordane, dieldrin, heptachlor expoxide, HCB and PCB were present in all the eggs analyzed. Mean contaminant levels were highest in sharp-shinned hawks, slightly lower in Cooper's hawks, and significantly lower in goshawks; for example, mean DDE values were 7.23, 4.48 and 0.90 mg kg(-1) (wet weight), respectively. Total PCB levels were generally less than 1.5 mg kg(-1), lower than those associated with reproductive effects in field and laboratory studies with other species. Mean shell thicknesses of sharp-shinned and Cooper's hawk eggs were significantly less than mean pre-DDT era thicknesses (-10 and -8%, respectively), reductions that were probably not relevant to reproductive success. Goshawk eggs exhibited no significant reduction in shell thickness. Contaminant levels among the three species probably reflect differing food habits and migratory patterns.     

Book reviews

Ecological Economics: The Science and Management of Sustainability

R. Costanza (Ed.)

New York, Columbia, 1991, 515 pp.

Environmental Auditing: The Challenge of the 1990s

Banff Centre for Management

Calgary, University of Calgary Press, 1992, 236 pp, pb.

Interpreting Nature: Cultural Constructions of the Environment

I. G. Simmons

London, Routledge, 1993, 200 pp., £40 hb, £12.99 pb     

Ice Storm Damage and Early Recovery in an Old-Growth Forest

We quantified the damage causedby a major ice storm to individual trees in two1-ha permanent plots located at Mont St. Hilairein southwestern Québec, Canada. The storm, whichoccurred in January 1998, is the worst on recordin eastern North America; glaze ice on the orderof 80–100 mm accumulated at our study site. Allbut 3% of the trees (DBH 10 cm) lost at leastsome crown branches, and 35% lost more than halftheir crown. Damage to trees increased in the order: Tsuga canadensis, Betula alleghaniensis, Ostrya virginiana, Acer saccharum, Fagus grandifolia, Quercus rubra, Betula papyrifera, Acer rubrum, Tilia americana, and Fraxinus americana. Only 22% of the saplings and small trees (4 cm < DBH < 10 cm)escaped being broken or pinned to the ground byfalling material. Levels of damage generally weregreater in an exposed ridge top forest than in acove protected from wind. By August 1999 only53% of the trees had new shoots developing fromthe trunk or broken branches; among the moredominant canopy trees, Fagus grandifoliahad the least sprouting and Acer saccharumand Quercus rubra the most. We anticipateand will monitor both significant turnover in thetree community and some shift in composition ofthe canopy dominants.     

The Mid-Canada Radar Line and First Nations' people of the James Bay region, Canada: an evaluation using log-linear contingency modelling to analyze organochlorine frequency data

Abandoned radar line stations in the North American arctic and sub-arctic regions are point sources of contamination, especially for PCBs. Few data exist with respect to human body burden of organochlorines (OCs) in residents of communities located in close proximity to these radar line sites. We compared plasma OC concentration (unadjusted for total lipids) frequency distribution data using log-linear contingency modelling for Fort Albany First Nation, the site of an abandoned Mid-Canada Radar Line station, and two comparison populations (the neighbouring community of Kashechewan First Nation without such a radar installation, and Hamilton, a city in southern Ontario, Canada). This type of analysis is important as it allows for an initial investigation of contaminant data without imputing any values. The two-state log-linear model (employing both non-detectable and detectable concentration frequencies and applicable to PCB congeners 28 and 105 and cis-nonachlor) and the four-state log-linear model (using quartile concentration frequencies for Aroclor 1260, PCB congeners [99,118,138,153,156,170,180,183,187], beta-HCH, p,p'-DDT +p,p'-DDE, HCB, mirex, oxychlordane, and trans-nonachlor) revealed that the effects of subject gender were inconsequential. Significant differences (p < 0.05) between the groups examined were attributable to the effect of location on the frequency of detection of OCs or on their differential distribution among the concentration quartiles. In general, people from Hamilton had higher frequencies of non-detections and of concentrations in the first quartile (p < 0.05) for most OCs compared to people from Fort Albany and Kashechewan (who consume a traditional diet of wild meats that does not include marine mammals). An unexpected finding was that, for Kashechewan males, the frequency of many OCs was significantly higher (p < 0.05) in the 4th concentration quartile than that predicted by the four-state log-linear model, but significantly lower than expected in the 1st quartile for beta-HCH. The levels of PCBs found for women in Fort Albany and Kashechewan were greater than those reported for Dene (First Nation people) and Métis (mixed heritage) of the western Northwest Territories (NWT) who did not consume marine mammals, and for Inuit living in the central NWT (occasional consumers of marine mammals). Moreover, the levels of total p,p'-DDT were greater for Fort Albany and Kashechewan women compared to these same aboriginal groups.     

Assessing workplace chemical exposures: the role of exposure monitoring

Occupational exposure is the condition of being subjected through employment to a chemical, physical, or biological agent, or to a specific process, practice, behavior, or organization of work. Exposure to a chemical agent is typically the contact of that agent with the outer boundary of a subject, such as the respiratory system, skin, or digestive system. In occupational hygiene we are most concerned with exposure through the respiratory system, although, increasingly we are concerned with the results of dermal exposures, including those exposures to the skin that can be transferred to the mouth and digestive system. This presentation will detail methods available for assessing personal exposures to chemicals through monitoring. The results from monitoring can then be compared to established guidelines and regulations, although this is not the only rationale for making measurements. These monitoring methods are currently used around the world to establish the benchmark hazard from which risk to the worker can be predicted. The presentation will describe the general techniques for assessing exposures to the respiratory system from chemical gases and vapors, chemical dusts, and exposures to the skin from bulk chemicals or chemical contamination of surfaces. For respiratory exposures, direct-reading instruments are available for spot measurements, and for monitoring short-term fluctuations in concentration. However, most standards and regulations are based on time-integrated (time-weighted average) exposures, requiring longer-term integrative methods. Therefore, the specific focus of this review will be the methods available for full work-shift sampling. For gases and vapors this will include taking whole-air samples in canisters or polymer bags, or concentration of chemicals by absorption in liquids or adsorption on solid sorbents, with subsequent chemical analysis. Chemical concentration can take place by pumping air through the sorbing media, or by allowing molecules to diffuse to the sorbent surface. Transfer of the collected chemicals to the analytical instrumentation can be accomplished using solvent displacement and injection, or through the application of heat to bring the collected molecules back into the vapor phase. For particles, the particle size is important as this determines the site of deposition in the lungs, and so time-integrated sampling on filters using various types of size-selective samplers is preferred. Finally, some techniques that have been used to assess the potential for chemical contamination of the skin are presented. Biomonitoring is another tool that can be used to assess exposure, and the results are more relevant to dosimetric considerations than exposure. Biomonitoring is a complex subject worthy of a separate review, and will be considered only briefly here.     

Evaluating response surface designs for uncertainty analysis and prescriptive applications of a large-scale water quality model

Environmental models are often too large and cumbersome for effective use in regulatory decision making or in the characterization of uncertainty. This paper describes and compares four response surfaces that could complement a large-scale water quality model, the U.S. National Water Pollution Control Assessment Model (NWPCAM), in simulation and regulatory decision support applications. Results show that a physically based reduced-form model that exploits the mathematical structure of the underlying water quality model is a better predictor of policy-relevant outputs than the polynomial expansions that are frequently used in response surface studies.