Formation factor logging by electrical methods. Comparison of formation factor logs obtained in situ and in the laboratory

In this paper, a new in situ method for obtaining the formation factor, which is essential for the matrix diffusion, is described and tested in intrusive igneous rock. The method is based on electrical resistivity measurements in rock where the pore water and rock resistivities are essential parameters. The method is based on electromigration instead of diffusion as in traditional diffusion experiments. In previous works, quantitative formation factors of rock have been obtained by electrical methods in the laboratory. Here, a similar approach is used in situ. An in situ logging campaign was performed by SKB during 2000 in the 1700-m-deep borehole KLX02 in Laxemar, Sweden. The rock resistivity was measured with the slimhole Dual Laterolog from Antares. The groundwater resistivity was measured with the Difference Flow Meter from Posiva. A formation factor log was obtained with the maximum vertical resolution of 10 cm. In order to validate the log, 100 rock samples were taken from the bore core, and a formation factor log was obtained by using electrical methods in the laboratory. Both direct current (DC) and alternating current (AC) were used. The measurements on the core confirmed that the in situ log was quantitative, but with a possible systematic error. The in situ formation factors were on average about 1/3 to 1/5 of the laboratory formation factors, depending on depth.     

Occurrence and source of brominated organic compounds in surface waters

Monitoring of organic halogen compounds, measured as adsorbable organically bound bromine (AOBr), in an eutrophic lake, which is influenced by treated waste water, revealed repeatedly high concentrations of organobromine compounds in late summer, whereas five times lower values were measured during the rest of the year. It was possible to reproduce the in situ observed AOBr increase in the laboratory. Batch experiments were performed with lake water from two different lakes and an algae culture. It could be shown that the AOBr production is not limited to strong waste water influenced lakes. Furthermore, the AOBr formation requires light and the presence of algae, and thus is most probably biotic in nature. A low content of nutrients favours the formation of organic bromine compounds. To our knowledge this is the first report about the seasonally occurrence of naturally produced organic bromine compounds in lakes/surface waters.     

Interaction between water flow and spatial distribution of microbial growth in a two-dimensional flow field in saturated porous media

Bacterial growth and its interaction with water flow was investigated in a two-dimensional flow field in a saturated porous medium. A flow cell (56 x 44 x 1 cm) was filled with glass beads and operated under a continuous flow of a mineral medium containing nitrate as electron acceptor. A glucose solution was injected through an injection port, simulating a point source contamination. Visible light transmission was used to observe the distribution of the growing biomass and water flow during the experiment. At the end of the experiment (on day 31), porous medium samples were destructively collected and analyzed for abundance of total and active bacterial cells, bacterial cell volume and concentration of polysaccharides and proteins. Microbial growth was observed in two stripes along the length of the flow cell, starting at the glucose injection port, where highest biomass concentrations were obtained. The spatial distribution of biomass indicated that microbial activity was limited by transverse mixing between glucose and nitrate media, as only in the mixing zone between the media high biological activities were achieved. The ability of the biomass to change the flow pattern in the flow cell was observed, indicating that the biomass was locally reducing the hydraulic conductivity of the porous medium. This bioclogging effect became evident when the injection of the glucose solution was turned off and water flow still bypassed the area around the glucose injection port, preserving the flow pattern as it was during the injection of the glucose solution. As flow bypass was possible in this system, the average hydraulic properties of the flow cell were not affected by the produced biomass. Even in the vicinity of the injection port, the total volume of the bacterial cells remained below 0.01% of the pore space and was unlikely to be responsible for the bioclogging. However, the bacteria produced large amounts of extracellular polymeric substances (EPS), which likely caused the observed bioclogging effects.     

Full-scale evaluation of mercury control with sorbent injection and COHPAC at Alabama Power E.C. Gaston

The overall objective of this project was to determine the cost and impacts of Hg control using sorbent injection into a Compact Hybrid Particulate Collector (COHPAC) at Alabama Power's Gaston Unit 3. This test is part of a program funded by the U.S. Department of Energy's National Energy Technology Laboratory (NETL) to obtain the necessary information to assess the costs of controlling Hg from coal-fired utility plants that do not have scrubbers for SO2 control. The economics will be developed based on various levels of Hg control. Gaston Unit 3 was chosen for testing because COHPAC represents a cost-effective retrofit option for utilities with existing electrostatic precipitators (ESPs). COHPAC is an EPRI-patented concept that places a high air-to-cloth ratio baghouse downstream of an existing ESP to improve overall particulate collection efficiency. Activated carbons were injected upstream of COHPAC and downstream of the ESP to obtain performance and operational data. Results were very encouraging, with up to 90% removal of Hg for short operating periods using powdered activated carbon (PAC). During the long-term tests, an average Hg removal efficiency of 78% was measured. The PAC injection rate for the long-term tests was chosen to maintain COHPAC cleaning frequency at less than 1.5 pulses/bag/hr.     

The effect of export to the deep sea on the long-range transport potential of persistent organic pollutants

BACKGROUND: Export to the deep sea has been found to be a relevant pathway for highly hydrophobic chemicals. The objective of this study is to investigate the influence of this process on the potential for long-range transport (LRT) of such chemicals. METHODS: The spatial range as a measure of potential for LRT is calculated for seven PCB congeners with the multimedia fate and transport model ChemRange. Spatial ranges for cases with and without deep sea export are compared. RESULTS AND DISCUSSION: Export to the deep sea leads to increased transfer from the air to the surface ocean and, thereby, to lower spatial ranges for PCB congeners whose net deposition rate constant is similar to or greater than the atmospheric degradation rate constant. This is fulfilled for the PCB congeners 101, 153, 180, and 194. The spatial ranges of the congeners 8, 28, and 52, in contrast, are not affected by deep sea export. With export to the deep sea included in the model, the spatial ranges of the heavier congener are similar to those of the lighter ones, while the intermediate congeners 101 and 153 have the highest potential for long-range transport. CONCLUSIONS: Transfer to the deep ocean affects the mass balance and the potential for LRT of highly hydrophobic chemicals and should be included in multimedia fate models containing a compartment for ocean water.     

Estimating erosion in a riverine watershed bayou liberty-tchefuncta river in louisiana

GOAL, SCOPE, BACKGROUND: Sheet erosion from agricultural, forest and urban lands may increase stream sediment loads as well as transport other pollutants that adversely affect water quality, reduce agricultural and forest production, and increase infrastructure maintenance costs. This study uses spatial analysis techniques and a numerical modeling approach to predict areas with the greatest sheet erosion potential given different soils disturbance scenarios. METHODS: A Geographic Information System (GIS) and the Universal Soil Loss Equation (USLE) were used to estimate sheet erosion from 0.64 ha parcels of land within the watershed. The Soil Survey of St. Tammany Parish, Louisiana was digitized, required soil attributes entered into the GIS database, and slope factors determined for each 80 x 80 meter parcel in the watershed. The GIS/USLE model used series-specific erosion K factors, a rainfall factor of 89, and a GIS database of scenario-driven cropping and erosion control practice factors to estimate potential soil loss due to sheet erosion. RESULTS AND DISCUSSION: A general trend of increased potential sheet erosion occurred for all land use categories (urban, agriculture/grasslands, forests) as soil disturbance increases from cropping, logging and construction activities. Modeling indicated that rapidly growing urban areas have the greatest potential for sheet erosion. Evergreen and mixed forests (production forest) had lower sheet erosion potentials; with deciduous forests (mostly riparian) having the least sheet erosion potential. Erosion estimates from construction activities may be overestimated because of the value chosen for the erosion control practice factor. CONCLUSIONS: This study illustrates the ease with which GIS can be integrated with the Universal Soil Loss Equation to identify areas with high sheet erosion potential for large scale management and policy decision making. RECOMMENDATIONS: The GIS/USLE modeling approach used in this study offers a quick and inexpensive tool for estimating sheet erosion within watersheds using publicly available information. This method can quickly identify discrete locations with relatively precise spatial boundaries (approximately 80 meter resolution) that have a high sheet erosion potential as well as areas where management interventions might be appropriate to prevent or ameliorate erosion.     

Boating and navigation activities influence the recruitment of fish in a Baltic Sea archipelago area

We studied the effects of boating and navigation activities on the recruitment of coastal fish in the Stockholm archipelago in the NW Baltic proper. The impacts were quantified by sampling metamorphosed young-of-the-year (Y-O-Y) fish in inlets adjacent to i) routes for medium-sized passenger ferries; ii) berths (small marinas) with small boats; and iii) references. Species with high preference for vegetation were negatively influenced by boating and navigation activities and species with low preference positively influenced. Pike (Esox lucius) Y-O-Y were significantly more abundant in reference areas, while bleak (Alburnus alburnus) were more abundant in dredged marinas. No statistically significant patterns were identified for perch (Perca fluviatilis) although there was a trend of low abundance along ferry routes. Many species of nearshore fishes are dependent on submerged vegetation as spawning and larval substrate, structural refuge and feeding habitat. Our results suggest that the negative effects from boating and navigation activities on the coverage and height of vegetation, especially on species of Chara and Potamogeton spp., may contribute to changes in the Y-O-Y fish community.     

Occurrence of bisphenol A in surface water and uptake in fish: evaluation of field measurements

In this study the actual presence of the suspected endocrine disrupter Bisphenol A (BPA) in water systems was studied in the Netherlands. BPA was shown to be present in Dutch surface water at levels up to 330 ng/l, and one occasional observation of 21 microg/l. During the three sampling periods, 60-80% of the samples, most from marine and estuarine locations, contained BPA levels below the limit of quantification (14-40 ng/l). At a selected number of locations the presence of BPA in fish was studied, which showed that BPA varied from 2 to 75 ng/g in the liver and 1 to 11 ng/g in the muscle. Based on present measured concentrations in surface water and on literature derived toxicity data it was concluded that ecotoxicological effects nor estrogenic effects are likely to occur in the field situation.