Mercury cycling and species mass balances in four North American lakes

A mass balance model for mercury based on the fugacity concept is applied to Lake Superior, Lake Michigan, Onondaga Lake and Little Rock Lake to evaluate model performance, analyze cycling of three mercury species groups (elemental, divalent and methyl mercury), and identify important processes that determine the source-to-concentration relationship of the three mercury species groups in these lakes. This model application to four disparate ecosystems is an extension of previous applications of fugacity-based models describing mercury cycling. The model performs satisfactorily following site-specific parameterization, and provides an estimate of minimum rates of species interconversion that compare well with literature. Volatilization and sediment burial are the main processes removing mercury from the lakes, and uncertainty analyses indicate that air-water exchange of elemental mercury and water-sediment exchange of divalent mercury attached to particles are influential in governing mercury concentrations in water. Any new model application or field campaign to quantify mercury cycling in a lake should consider these processes as important.     

Integrative approach to delineate natural attenuation of chlorinated benzenes in anoxic aquifers

Biodegradation of chlorobenzenes was assessed at an anoxic aquifer by combining hydrogeochemistry and stable isotope analyses. In situ microcosm analysis evidenced microbial assimilation of chlorobenzene (MCB) derived carbon and laboratory investigations asserted mineralization of MCB at low rates. Sequential dehalogenation of chlorinated benzenes may affect the isotope signature of single chlorobenzene species due to simultaneous depletion and enrichment of ¹³C, which complicates the evaluation of degradation. Therefore, the compound-specific isotope analysis was interpreted based on an isotope balance. The enrichment of the cumulative isotope composition of all chlorobenzenes indicated in situ biodegradation. Additionally, the relationship between hydrogeochemistry and degradation activity was investigated by principal component analysis underlining variable hydrogeochemical conditions associated with degradation activity at the plume scale. Although the complexity of the field site did not allow straightforward assessment of natural attenuation processes, the application of an integrative approach appeared relevant to characterize the in situ biodegradation potential.     

Cold start extra emissions as a function of engine stop time: Evolution over the last 10 years

Cars with catalysts show a significant increase in exhaust emissions at engine start. These extra emissions are expressed as the difference, over a particular driving cycle, between emissions generated when the vehicle is started and when the engine or the catalyst are stably warm. Experimental data, suitable for the assessment of cold start emissions, are usually available for completely cooled engines. Most results originate from tests at ambient temperature of 20–30 °C and with an engine stop time of at least 12 h. On the other hand, data including shorter stop times are very rare.The present work investigates the influence of exhaust emissions with shorter stop times, i.e. 0.5, 1, 2 and 4 h. The main goal consists in the comparison of emissions exhausted by recent car models (Euro-4) against emissions assessed in the framework of a similar campaign 10 years ago (FAV1/Euro-1 vehicles).A short survey of the current extra emission estimation methods is presented in this paper. It is shown that some methods are not suited for providing correct estimations in all cases. We discuss the fact that different estimation methods can show either similar or completely different results depending on the evolution behaviour of the hot emissions.Due to new technologies, e.g. the catalyst and improved engine control algorithms, emissions have been considerably reduced over the last 10 years. In this study it is determined how the relative extra emissions, i.e. extra emissions relative to the extra emissions for the standard stop time of 12 h, expressed as a function of stop time have changed. We may claim with caution that for medium stop times of 0.5–4 h the average relative extra emissions of Euro-4 vehicles are well below the average of the relative extra emissions of Euro-1 vehicles.     

Source identification of personal exposure to fine particulate matter using organic tracers

Personal exposure to fine particulate matter (PM2.5) is due to both indoor and outdoor sources. Contributions of sources to personal exposure can be quite different from those observed at ambient sampling locations. The primary goal of this study was to investigate the effectiveness of using trace organic speciation data to help identify sources influencing PM2.5 exposure concentrations. Sixty-four 24-h PM2.5 samples were obtained on seven different subjects in and around Boulder, CO. The exposure samples were analyzed for PM2.5 mass, elemental and organic carbon, organic tracer compounds, water-soluble metals, ammonia, and nitrate. This study is the first to measure a broad distribution of organic tracer compounds in PM2.5 personal samples. PM2.5 mass exposure concentrations averaged 8.4 μg m^?3. Organic carbon was the dominant constituent of the PM2.5 mass. Forty-four organic species and 19 water-soluble metals were quantifiable in more than half of the samples. Fifty-four organic species and 16 water-soluble metals had measurement signal-to-noise ratios larger than two after blank subtraction.The dataset was analyzed by Principal Component Analysis (PCA) to determine the factors that account for the greatest variance. Eight significant factors were identified; each factor was matched to its likely source based primarily on the marker species that loaded the factor. The results were consistent with the expectation that multiple marker species for the same source loaded the same factor. Meat cooking was an important source of variability. The factor that represents meat cooking was highly correlated with organic carbon concentrations (r = 0.84). The correlation between ambient PM2.5 and PM2.5 exposure was relatively weak (r = 0.15). Time participants spent performing various activities was generally not well correlated with PCA factor scores, likely because activity duration does not measure emissions intensity. The PCA results demonstrate that organic tracers can aid in identifying factors that influence personal exposures to PM2.5.     

Why the Far-Distant Future Should Be Discounted at Its Lowest Possible Rate

A critical feature of the distant future is currently unresolvable uncertainty about what will then be the appropriate rate of return on capital to use for discounting. This paper shows that there is a well-defined sense in which the “lowest possible” interest rate should be used for discounting the far-distant future part of any investment project. Some implications are discussed for evaluating long-term environmental projects or activities, like measures to mitigate the possible effects of global climate change.     

Ecology of sandy beaches in Oman

The benthic macrofauna and physical features of 10 sandy beaches along the coast of Oman were surveyed quantitatively. This is a mesotidal regime mostly subject to low to moderate wave energy but more exposed in the south. Five northern beaches are tide-dominated, with low wave energy, and their profiles consist of a berm, a steep, swash-dominated upper shore and a broad tide-dominated terrace from mid-shore downwards. They are composed of moderately sorted fine to medium sands. Southern beaches experience greater wave energy, particularly during the summer southwest monsoon, and exhibit smoother, concave profiles with fine, fairly well sorted carbonate sand. 58 species and species groups were recorded, with crustanceans, polychaetes and molluscs dominant. In general species richness was high, at least 19–25 species per beach, but dry biomass moderate to low at 26–90g/m shoreline, with one high value of 450g/m. Total abundance was moderate at 3–73×10³ organisms/m of beach. Some zonation was evident with ocypodid crabs andTylos in the supralittoral, cirolanid isopods on the upper shore and a variety of species on the lower shore. The coast of Oman appears to constitute a single zoogeographic region, but with some regional differentiation between north and south due to varying physical conditions. Thus, OmanÕs beaches are characterized by tide-dominated morphodynamics and exceptionally high species richness.     

Determinants of paternity success in the spider Pholcus phalangioides (Pholcidae: Araneae): the role of male and female mating behaviour

In double mating experiments, we examined whether and to what extent various male and female behavioural traits influence the course of mating and fertilization success in the cellar spider. In males, we focussed on pre-copulatory behaviour and on the rhythmic twisting movements that the male performs with his pedipalps during copulation. In females, we investigated remating decisions and the effect of female termination of copulation. Second males fertilized a high proportion of the eggs (P ₂: median 89%) despite much shorter second matings, with high variation in relative paternity success. The number of pedipalp movements (PPMs) of either male was a better predictor of paternity than copulation duration. Our results suggest that in second matings, PPMs help to remove sperm from previous males, whereas in first matings a high number of PPMs enhances fertilization success, either due to numerical sperm competition or cryptic female choice. Furthermore, we found a negative male age effect on paternity in second matings, implying that age-related deterioration of spermatozoa may promote variation in fertilization success. Female receptivity decreased significantly in second matings; only 70% of the females remated. Females that accepted a second copulation were found to terminate these much earlier and with higher probability than first matings. This suggests that the intensity of conflict between the sexes is higher in second matings. Increased intensity of sexual conflict may be responsible for stronger selection on male traits, as pre-copulatory behaviour and age only affected male copulatory performance and paternity in second matings. Electronic Publication     

Characterization of polycyclic aromatic hydrocarbons (PAHs) on lime spray dryer (LSD) ash using different extraction methods

In this study, traditional Soxhlet, automatic Soxhlet and ultrasonic extraction techniques were employed to determine the speciation and concentration of polycyclic aromatic hydrocarbons (PAHs) on lime spray dryer (LSD) ash samples collected from the baghouse of a spreader stoker boiler. To test the efficiencies of different extraction methods, LSD ash samples were doped with a mixture of 16 US EPA specified PAHs to measure the matrix spike recoveries. The results showed that the spike recoveries of PAHs were different using these three extraction methods with dichloromethane (DCM) as the solvent. Traditional Soxhlet extraction achieved slightly higher recoveries than automatic Soxhlet and ultrasonic extraction. Different solvents including toluene, DCM:acetone (1:1 V/V) and hexane:acetone (1:1 V/V) were further examined to optimize the recovery using ultrasonic extraction. Toluene achieved the highest spike recoveries of PAHs at a spike level of 10 microg kg(-1). When the spike level was increased to 50 microg kg(-1), the spike recoveries of PAHs also correspondingly increased. Although the type and concentration of PAHs detected on LSD ash samples by different extraction methods varied, the concentration of each detected PAH was consistently low, at microg kg(-1) levels.     

Probabilistic approaches in the effect assessment of toxic chemicals. What are the benefits and limitations?

There is an ongoing discussion whether in the environmental risk assessment for chemicals the so called 'deterministic' approach using point estimates of exposure and effect concentrations is still appropriate. Instead, the more detailed and scientifically sounder probabilistic methods that have been developed over the last years are widely recommended. Here, we present the results of a probabilistic effect assessment for the aquatic environment performed for the pesticide methyl parathion and compare them with the results obtained with the common deterministic approach as described in the EU Technical Guidance Document. Methyl parathion was chosen because a sufficient data set (acute toxicity data for about 70 species) was available. The assumptions underlying the probabilistic effect assessment are discussed in the light of the results obtained for methyl parathion. Two important assumptions made by many studies are: (i) a sufficient number of ecologically relevant toxicity data is available, (ii) the toxicity data follow a certain distribution such as log-normal. Considering the scarcity of data for many industrial chemicals, we conclude that these assumptions would not be fulfilled in many cases if the probabilistic assessment was applied to the majority of industrial chemicals. Therefore, despite the well-known limitations of the deterministic approach, it should not be replaced by probabilistic methods unless the assumptions of these methods are carefully checked in each individual case, which would significantly increase the effort for the assessment procedure.     

Dioxin- and POP-contaminated sites—contemporary and future relevance and challenges

BACKGROUND, AIM AND SCOPE: Once they have been generated, polychlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs) and other persistent organic pollutants (POPs) can persist in soils and sediments and in waste repositories for periods extending from decades to centuries. In 1994, the US EPA concluded that contaminated sites and other reservoirs are likely to become the major source of contemporary pollution problems with these substances. With this in mind, this article is the first in a new series in ESPR under the title 'Case Studies on Dioxin and POP Contaminated Sites--Contemporary and Future Relevance and Challenges', which will address this important issue. The series will document various experiences from sites contaminated with PCDD/F and other POPs. This article provides an overview of the content of the articles comprising the series. In addition, it provides a review of the subject in its own right and identifies the key issues arising from dioxin/POP-contaminated sites. Additionally, it highlights the important conclusions that can be drawn from these examples. The key aim of this article and of the series as a whole is to provide a comprehensive overview of the types of PCDD/F contaminated sites that exist as a result of historical activities. It details the various processes whereby these sites became contaminated and attempts to evaluate their contemporary relevance as sources of PCDD/Fs and other POPs. It also details the various strategies used to assess these historical legacies of contamination and the concepts developed, or which are under development, to effect their remediation. MAIN FEATURES: Special sessions on 'Contaminated sites--Cases, remediation, risk and policy' were held at the DIOXIN conferences in 2006 and 2007, and this theme will be continued at DIOXIN 2008 to be held in Birmingham. Selected cases from the approximately 70 contributions made to these sessions, together with some additional invited case studies are outlined together with the key issues they raise. By evaluating these cases and adding details of experiences published in the current literature, an overview will be given of the different features and challenges of dioxin and POP-contaminated sites. RESULTS: This article provides a systematic categorisation of types of PCDD/F and POP-contaminated sites. These are categorised according to the chemical or manufacturing process, which generated the PCDD/Fs or POPs and also includes the use and disposal aspects of the product life cycle in question. The highest historical PCDD/F and dioxin-like polychlorinated biphenyl (PCB) contamination burdens have arisen as a result of the production of chlorine and of chlorinated organic chemicals. In particular, the production of chlorinated pesticides, PCBs and the related contaminated waste streams are identified being responsible for historical releases of toxic equivalents (TEQs) at a scale of many tonnes. Along with such releases, major PCDD/F contaminated sites have been created through the application or improper disposal of contaminated pesticides, PCBs and other organochlorine chemicals, as well through the recycling of wastes and their attempted destruction. In some extreme examples, PCDD/F contaminated sites have also resulted from thermal processes such as waste incinerators, secondary metal industries or from the recycling or deposition of specific waste (e.g. electronic waste or car shredder wastes), which often contain chlorinated or brominated organic chemicals. The examples of PCDD/F and dioxin-like PCB contamination of fish in European rivers or the impact of contaminated sites upon fishing grounds and upon other food resources demonstrate the relevance of these historical problems to current and future human generations. Many of the recent food contamination problems that have emerged in Europe and elsewhere demonstrate how PCDD/F and dioxin like PCBs from historical sources can directly contaminate human and animal feedstuffs and indeed highlight their considerable contemporary relevance in this respect. Accordingly, some key experiences and lessons learnt regarding the production, use, disposal and remediation of POPs from the contaminated sites are summarised. DISCUSSION: An important criterion for evaluating the significance and risks of PCDD/Fs and other POPs at contaminated sites is their present or future potential for mobility. This, in turn, determines to a large degree their propensity for off-site transport and environmental accessibility. The detailed evaluation of contaminated site cases reveals different site-specific factors, which influence the varied pathways through which poor water-soluble POPs can be mobilised. Co-contaminants with greater water solubility are also typically present at such sites. Hence, pumping of groundwater (pump and treat) is often required in addition to attempting to physically secure a site. At an increasing number of contaminated sites, securing measures are failing after relatively short time spans compared to the time horizon, which applies to persistent organic pollutant contamination. Due to the immense costs and challenges associated with remediation of contaminated sites 'monitored natural attenuation' is increasingly gaining purchase as a conceptual remediation approach. However, these concepts may well prove limited in their practical application to contaminated sites containing persistent organic pollutants and other key pollutants like heavy metals. CONCLUSIONS: It is inevitable, therefore, that dioxin/POP-contaminated sites will remain of contemporary and future relevance. They will continue to represent an environmental issue for future generations to address. The securing and/or remediation of dioxin/POP-contaminated sites is very costly, generally in the order of tens or hundreds of millions of dollars. Secured landfills and secured production sites need to be considered as constructions not made for 'eternity' but built for a finite time scale. Accordingly, they will need to be controlled, supervised and potentially repaired/renewed. Furthermore, the leachates and groundwater impacted by these sites will require ongoing monitoring and potential further remediation. These activities result in high maintenance costs, which are accrued for decades or centuries and should, therefore, be compared to the fully sustainable option of complete remediation. The contaminated site case studies highlight that, while extensive policies and established funds for remediation exist in most of the industrialised western countries, even these relatively well-regulated and wealthy countries face significant challenges in the implementation of a remediation strategy. This highlights the fact that ultimately only the prevention of contaminated sites represents a sustainable solution for the future and that the Polluter Pays Principle needs to be applied in a comprehensive way to current problems and those which may emerge in the future. RECOMMENDATIONS AND PERSPECTIVES: With the continuing shift of industrial activities in developing and transition economies, which often have poor regulation (and weak self-regulation of industries), additional global challenges regarding POPs and other contaminated sites may be expected. In this respect, a comprehensive application of the "polluter pays principle" in these countries will also be a key to facilitate the clean-up of contaminated areas and the prevention of future contaminated sites. The threats and challenges of contaminated sites and the high costs of securing/remediating the problems highlight the need for a comprehensive approach based upon integrated pollution prevention and control. If applied to all polluting (and potentially polluting) industrial sectors around the globe, such an approach will prove to be both the cheapest and most sustainable way to underpin the development of industries in developing and transition economies.