Prenatal diagnosis of neurofibromatosis type 1: From flanking rflps to intragenic microsatellite markers

Even though the neurofibromatosis type 1 (NF1) gene was cloned more than 3 years ago, the process of identifying mutations has not been fruitful, and genetic counselling is mainly based on the use of linked markers. Since 1990, we have analysed 130 NF1 families and have performed six prenatal diagnoses. In each case, genetic counselling has relied on linked markers and informativity was achieved in all of them. The use of intragenic microsatellite polymorphisms (IVS27AAAT2.1, IVS27AC28.4, IVS27AC33.1, and IVS38GT53.0) has increased the informativeness in our series of NF1 families to an average of 90 per cent, providing accurate diagnosis and confirmation of the disease status.     

The Ethics of Constrained Choice: How the Industrialization of Agriculture Impacts Farming and Farmer Behavior

The industrialization of agriculture not only alters the ways in which agricultural production occurs, but it also impacts the decisions farmers make in important ways. First, constraints created by the economic environment of farming limit what options a farmer has available to him. Second, because of the industrialization of agriculture and the resulting economic pressures it creates for farmers, the fact that decisions are constrained creates new ethical challenges for farmers. Having fewer options when faced with severe economic pressures is a very different situation for farmers than having many options available. We discuss the implications of constrained choice and show that it increases the likelihood that farmers will consider unethical behavior.     

The challenges of sustainability in mining regions: The coal mining region of Santa Catarina, Brazil

Throughout history, mining communities have invariably found themselves striving for a good quality of life and a long‐term future. In the 21st century, problems of maintaining the economic vitality of mining regions are now compounded by concerns about the biophysical integrity of the local environment. In regions of the world where the economic viability of the resource is marginal and achieving a reasonable quality of life is a daily struggle, sustainable mining may seem to be a dubious prospect at best. Yet the twin imperatives of global political forces and burgeoning environmental concerns are requiring industry, governments and other interests to re‐conceptualize the way in which mining takes place in communities. Although mining itself may not be seen as an industry that contributes to the achievement of environmental objectives, it could — with careful planning — be used as a tool to foster a more sustainable and healthier community. This argument is considered in the context of the coal mining region of Santa Catarina, Brazil.     

MODELING LIGHT ATTENUATION,SECCHI DISK,AND EFFECTS OF TRIPTON IN SENACA RIVER,NEW YORK,USA1

The development, testing, and application of a probabilistic model framework for the light attenuation coefficient for downwelling irradiance (K_d) and Secchi disc transparency (SD) that resolves the effects of several light attenuating constituents, including phytoplankton and nonliving particles (tripton), is documented. The model is consistent with optical theory, partitioning the magnitudes of the light attenuating processes of absorption and scattering according to the contributions of attenuating constituents as simple summations. The probabilistic framework accommodates variations in the character and concentrations of these constituents and ambient conditions during measurements, and recognizes a linear relationship between the magnitudes of absorption and scattering by tripton. The model is tested and applied for a 21 km reach of the Seneca River, New York, that features optical gradients caused by an intervening hypereutrophic lake and dam, and a severe infestation of the exotic zebra mussel. The model is applied to resolve the roles of phytoplankton and tripton in regulating measured longitudinal patterns of SD along the study reach of the river and increases in SD since the zebra mussel invasion, and to predict decreases in K_d since the invasion.     

PREDICTING FECAL COLIFORM BACTERIA LEVELS IN THE CHARLES RIVER,MASSACHUSETTS, USA1

In Massachusetts, the Charles River Watershed Association conducts a regular water quality monitoring and public notification program in the Charles River Basin during the recreational season to inform users of the river's health. This program has relied on laboratory analyses of river samples for fecal coliform bacteria levels, however, results are not available until at least 24 hours after sampling. To avoid the need for laboratory analyses, ordinary least squares (OLS) and logistic regression models were developed to predict fecal coliform bacteria concentrations and the probabilities of exceeding the Massachusetts secondary contact recreation standard for bacteria based on meteorological conditions and streamflow. The OLS models resulted in adjusted R²s ranging from 50 to 60 percent. An uncertainty analysis reveals that of the total variability of fecal coliform bacteria concentrations, 45 percent is explained by the OLS regression model, 15 percent is explained by both measurement and space sampling error, and 40 percent is explained by time sampling error. Higher accuracy in future bacteria forecasting models would likely result from reductions in laboratory measurement errors and improved sampling designs.     

On measuring wealth: a case study on the state of Queensland

In order for policy makers to plan effectively for sustainable development, there is a need for measures of welfare that consider changes in the natural capital stock. Current measures based on conventional national accounting are flawed because they are based solely on flow measures and do not account for environmental effects. In this paper, we use an expanded measure of wealth to estimate the value of natural capital for Queensland. The state's stock of natural capital is valued at A dollar 355.6 billion, of which non-timber forest resources account for 45.3%, ecosystem services 20.0%, and mineral resources 17.6%. This figure is a conservative estimate of the true value since some significant components such as the ecological and life-support functions of the environment are excluded. The estimates highlight the relative importance of different forms of natural capital and can be used to draw the attention of policymakers to the need to give adequate weight to the value of such services in decision-making processes.     

Composition and management of rechargeable electric torch wastes in Ibadan,Nigeria

The consumption, disposal, material and chemical compositions of rechargeable electric torch wastes (RETWs) were investigated in Ibadan, Nigeria. Twenty-five RETWs of ten models were collected and disassembled. Their battery electrodes (BEs) and printed circuit boards (PCBs) were acid digested and leached using United States Environmental Protection Agency (USEPA) method 3050B and USEPA Method 1311, respectively. The digests and extracts were analysed for total and extractable Pb, Cd, Cr and Ni using atomic absorption spectrophotometer. The US Test method (CPSC-CH-E 1002-08) was used for digestion of the plastic components. Two hundred questionnaires were distributed to users in Ibadan to determine their usage of RETs and their management when spent. The results indicated that BEs contributed the highest percentage (44 %) component, followed by plastic (38 %). Other components include metal, PCBs, glass and wire. Of the respondents, 61.9 % dispose their spent torches in dumpsites. The mean ± SD concentrations of Pb, Cd, Cr and Ni in the BEs were 500 ± 109 g/kg, 3.94 ± 6.84 mg/kg, 0.33 ± 0.88 mg/kg, 1.68 ± 0.74 mg/kg respectively; in the PCBs, they were 684 ± 42 g/kg, 13.7 ± 17.8 mg/kg, 13.5 ± 10.2 mg/kg and 193 ± 437 mg/kg; and in the plastics, they were 14.1 g/kg, 5.33 mg/kg, 17 mg/kg, and 4.67 mg/kg respectively. The extractable Pb in BE (2670 mg/L) and PCBs (235 mg/L) exceeded the Toxicity Characteristics Leaching Procedure (TCLP) limit of 5 mg/L. RETWs present potential environmental problems in the absence of effective recycling.     

Recycling of high purity selenium from CIGS solar cell waste materials

Copper indium gallium diselenide (CIGS) is a promising material in thin film solar cell production. To make CIGS solar cells more competitive, both economically and environmentally, in comparison to other energy sources, methods for recycling are needed. In addition to the generally high price of the material, significant amounts of the metals are lost in the manufacturing process. The feasibility of recycling selenium from CIGS through oxidation at elevated temperatures was therefore examined. During oxidation gaseous selenium dioxide was formed and could be separated from the other elements, which remained in solid state. Upon cooling, the selenium dioxide sublimes and can be collected as crystals. After oxidation for 1 h at 800 °C all of the selenium was separated from the CIGS material. Two different reduction methods for reduction of the selenium dioxide to selenium were tested. In the first reduction method an organic molecule was used as the reducing agent in a Riley reaction. In the second reduction method sulphur dioxide gas was used. Both methods resulted in high purity selenium. This proves that the studied selenium separation method could be the first step in a recycling process aimed at the complete separation and recovery of high purity elements from CIGS.     

The effect of an active steering system on city bus drivers’ muscle activity

City bus drivers spend hours driving under time pressure, in congested traffic and in a monotonous sitting position. This leads to unhealthy working conditions, especially in terms of physical and psychological stress. The aim of this study is to investigate whether an active steering system can alleviate the musculoskeletal stress involved in manoeuvring a bus. Twenty bus drivers drove a city bus equipped with the Volvo dynamic steering (VDS) support system in real traffic. Steering effort was evaluated with electromyography and with a questionnaire. Compared to baseline, VDS significantly reduced the required muscle activity by on average 15–25% while turning, and up to 68% in the part of the manoeuvre requiring maximum effort. The bus drivers believed that VDS will help reduce neck and shoulder problems, and they expressed a desire to have VDS installed in their own bus.     

Review of LCA studies of solid waste management systems – Part I: Lessons learned and perspectives

The continuously increasing solid waste generation worldwide calls for management strategies that integrate concerns for environmental sustainability. By quantifying environmental impacts of systems, life cycle assessment (LCA) is a tool, which can contribute to answer that call. But how, where and to which extent has it been applied to solid waste management systems (SWMSs) until now, and which lessons can be learnt from the findings of these LCA applications? To address these questions, we performed a critical review of 222 published LCA studies of SWMS. We first analysed the geographic distribution and found that the published studies have primarily been concentrated in Europe with little application in developing countries. In terms of technological coverage, they have largely overlooked application of LCA to waste prevention activities and to relevant waste types apart from household waste, e.g. construction and demolition waste. Waste management practitioners are thus encouraged to abridge these gaps in future applications of LCA. In addition to this contextual analysis, we also evaluated the findings of selected studies of good quality and found that there is little agreement in the conclusions among them. The strong dependence of each SWMS on local conditions, such as waste composition or energy system, prevents a meaningful generalisation of the LCA results as we find it in the waste hierarchy. We therefore recommend stakeholders in solid waste management to regard LCA as a tool, which, by its ability of capturing the local specific conditions in the modelling of environmental impacts and benefits of a SWMS, allows identifying critical problems and proposing improvement options adapted to the local specificities.