Role of sea-ice biota in nutrient and organic material cycles in the northern Baltic Sea

This paper compiles biological and chemical sea-ice data from three areas of the Baltic Sea: the Bothnian Bay (Hailuoto, Finland), the Bothnian Sea (Norrby, Sweden), and the Gulf of Finland (Tv?rminne, Finland). The data consist mainly of field measurements and experiments conducted during the BIREME project from 2003 to 2006, supplemented with relevant published data. Our main focus was to analyze whether the biological activity in Baltic Sea sea-ice shows clear regional variability. Sea-ice in the Bothnian Bay has low chlorophyll a concentrations, and the bacterial turnover rates are low. However, we have sampled mainly land-fast level first-year sea-ice and apparently missed the most active biological system, which may reside in deformed ice (such as ice ridges). Our limited data set shows high concentrations of algae in keel blocks and keel block interstitial water under the consolidated layer of the pressure ridges in the northernmost part of the Baltic Sea. In land-fast level sea-ice in the Bothnian Sea and the Gulf of Finland, the lowermost layer appears to be the center of biological activity, though elevated biomasses can also be found occasionally in the top and interior parts of the ice. Ice algae are light limited during periods of snow cover, and phosphate is generally the limiting nutrient for ice bottom algae. Bacterial growth is evidently controlled by the production of labile dissolved organic matter by algae because low growth rates were recorded in the Bothnian Bay with high concentrations of allochthonous dissolved organic matter. Bacterial communities in the Bothnian Sea and the Gulf of Finland show high turnover rates, and activities comparable with those of open water communities during plankton blooms, which implies that sea-ice bacterial communities have high capacity to process matter during the winter period.     

Levels of chlorinated compounds (CPs, PCPPs, PCDEs, PCDFs and PCDDs) in soils at contaminated sawmill sites in Sweden

Soil samples from five contaminated sawmill sites in Sweden were characterized with respect to chlorophenols (CP), chlorinated phenoxy phenols (PCPP, hydroxylated chlorinated diphenyl ethers), chlorinated diphenyl ethers (PCDE), chlorinated dibenzofurans (PCDF) and chlorinated dibenzo-p-dioxins (PCDD). The composition of chlorinated compounds in the soil samples was compared to the composition of two preservatives commonly used in the Scandinavian wood impregnation industry: the 2,3,4,6-tetrachlorophenol preservative called Ky-5 and the pentachlorophenol preservative Dowicide G. The levels of CPs in the soil samples ranged from 0.1 to 4500 mgkg-1 d.w., PCPPs from <0.15 to 940 mgkg-1 d.w., PCDEs from <38 to 6800 microgkg-1 d.w., PCDFs from 7.4 to 18000 microgkg-1 d.w. and PCDDs from 9.9 to 35000 microgkg-1 d.w. The resulting WHO-TEQ of PCDD/Fs in the soil samples ranged from 0.14 to 3000 microgkg-1 d.w. Despite a wide range of concentrations the congener compositions were similar within tetrachlorophenate and pentachlorophenate contaminated soils respectively. The contamination at each sawmill site may be linked to the use of either a tetrachlorphenol preservative, e.g. Ky-5, or a pentachlorophenol preservative, e.g. Dowicide G. Best-fit calculations were used to compare the chlorinated phenol contents of the preservatives to those of the soil samples. This revealed a positive correlation between the hydrophobicity (logKow) of contaminants and the ratio of their levels in soil to preservatives. The relative abundance of the chlorinated compounds varied greatly between the five sites studied, suggesting that their transport parameters differ substantially.     

Concentrations and Pools of Heavy Metals in Urban Soils in Stockholm,Sweden

The concentrations of heavy metals (Cd, Cr, Cu, Hg, Ni, Pb andZn) and arsenic (As) were surveyed and the metal pools estimatedin soils in Stockholm Municipality. The sampling sites were distributed all over the entire municipality with a higher sampling density in the city centre. Soils were sampled to a maximum depth of 25 to 60 cm. Soil texture, total-C content, electrical conductivity and pH were analysed. Heavy metal concentrations were determined after wet digestion with boiling7 M HNO₃.The results showed a wide range in heavy metal concentrations, as well as in other soil properties. The city centre soils constituted a rather homogeneous group whereas outside this areano geographical zones could be distinguished. These soils were grouped based on present land use, i.e. undisturbed soils, public parks, wasteland (mainly former industrial areas), and roadside soils. The city centre and wasteland soils generally hadenhanced heavy metal concentrations to at least 30 cm depth compared to park soils outside the city centre and rural (arable)soils in the region, which were used to estimate background levels. For example, the mean Hg concentration was 0.9 (max 3.3)mg kg^-1 soil at 0–5 cm and 1.0 (max 2.9) at 30 cm depth in the city centre soils, while the background level was 0,04 mg kg^-1. Corresponding values for Pb were 104 (max 444) and135 (max 339) mg kg^-1, at 0–5 and 30 cm, respectively, while the background level was 17 mg kg^-1.The average soil pools (0–30 cm depth) of Cu, Pb and Zn were 21,38 and 58 g m^-2 respectively, which for Pb was 3–4 timeshigher and for Cu and Zn 1.5–2 times higher than the backgroundlevel. The total amount of accumulated metals (down to 30 cm)in the city centre soils (4.5^*10 ⁶ m² public gardens and green areas) was estimated at 80, 1.1, 120 and 40 t for Cu, Hg, Pb and Zn, respectively. The study showed (1) thatfrom a metal contamination point of view, more homogeneous soilgroups were obtained based on present land use than on geographicdistance to the city centre, (2) the importance of establishing a background level in order to quantify the degree of contamination, and (3) soil samples has to be taken below the surface layer (and deeper than 30 cm) in order to quantify theaccumulated metal pools in urban soils.     

Temporal trend of bis(4-chlorophenyl) sulfone, methylsulfonyl-DDE and -PCBs in Baltic guillemot (Uria aalge) egg 1971-2001--a comparison to 4,4'-DDE and PCB trends

The dynamics of organohalogen contaminants and their metabolites are best studied over time by analysis of biota at high trophic levels. In this study, time trends, 1971-2001, of bis(4-chlorophenyl) sulfone (BCPS) and of methylsulfonyl-substituted metabolites of PCBs and 4,4'-DDE, were investigated in eggs of guillemot (Uria aalge) hatching in the Baltic Proper. Temporal trends of PCBs, trans-nonachlor, beta-HCH, 4,4'-DDT, and 4,4'-DDE were also assessed. Tris(4-chlorophenyl) methane (TCPMe), a 4,4'-DDT by-product, was detected in the eggs. The concentration of BCPS ranged between 2.6-0.76 microg/g on a lipid weight basis over the three decades and showed a significant 1.6% annual decrease. Three metabolites of PCBs, i.e. 3'-MeSO2-CB101, 4'-MeSO2-CB101 and 4-MeSO2-CB149, were quantified in all samples over time and showed an annual decrease of approximately 3% compared to MeSO2-DDE with a decrease of 8.9%. The methylsulfonyl-PCB and -DDE metabolites are eliminated more slowly than the persistent PCB congeners and 4,4'-DDE. Trans-nonachlor decreases by 16% compared to 19% and 9% for 4,4'-DDT and beta-HCH, respectively. The concentration of TCPMe in guillemot decreased by 8.2% per year. A linear relationship was found between TCPMe and 4,4'-DDE concentrations which supports the theory that TCPMe has an origin as a contaminant in commercial 4,4'-DDT products. The very slow decrease in BCPS concentrations is notable and remains to be explained. BCPS is still present at rather high concentrations in the guillemot eggs. The enantiomeric fraction varied between 0.27 and 0.67 which indicates less of a specific retention of the chiral MeSO2-PCBs in guillemot eggs than in grey seal tissues, for example. Independent of meta- or para-substitution of the sulfone group, the most accumulative atropisomer of each of four MeSO2-PCB pairs has been assigned an absolute R structure.     

Factors influencing PM10 emissions from road pavement wear

Accelerated pavement wear is one of the major environmental disadvantages of studded tyres in northern regions and results in increased levels of PM₁₀. Measurements of PM₁₀ in a road simulator hall have been used to study the influence of pavement properties, tyre type and vehicle speed on pavement wear. The test set-up included three different pavements (one granite and two quartzite with different aggregate sizes), three different tyre types (studded, non-studded, and summer tyres) and different speeds (30–70 km h^?1). The results show that the granite pavement was more prone to PM₁₀ production compared to the quartzite pavements. Studded winter tyres yield tens of times higher PM₁₀ concentrations compared to non-studded winter tyres. Wear from summer tyres was negligible in comparison. It was also shown that wear is strongly dependent on speed; every 10 km h^?1 increase yielded an increase of the PM₁₀ concentration of 680 μg m^?3 in one of the simulator experiments.     

Triclosan in individual human milk samples from Australia

Triclosan is a chlorinated phenol ether that has been in widespread use as a broad-spectrum antibacterial agent for four decades. When compared to the limited international data available on human body burden of triclosan, results from a pooled blood study suggested that triclosan concentrations in Australia were a factor two higher than observed in Sweden. This study determined triclosan levels in individual human milk samples (n = 151) collected between 2002 and 2005 from primiparous Australian mothers. It provided the first report of population triclosan levels and individual variation in Australia and gave a measure of infant exposure via breast feeding. The distribution of triclosan concentration was positively skewed, with 7.2% of the samples below the LOQ, 66% with a concentration of less than or equal to 1.0 ng g⁻¹ fresh weight and the remaining samples above 1 ng g⁻¹ reaching a maximum concentration of 19 ng g⁻¹ fresh weight. The mean and median triclosan concentrations were 1.3 ± 2.7 ng g⁻¹ f.w. and 0.26 ng g⁻¹ f.w., respectively. The results of this study showed high variability in triclosan concentrations between individuals and no correlations with maternal age (p = 0.094), maternal weight (p = 0.971) or infant age at the time of sample collection (p = 0.621). A large number of samples contained low or non-quantifiable concentrations of triclosan and so, in Australia, ubiquitous background exposure due to environmental sources is low. This means that body burden can be influenced by an individual’s use of triclosan containing product. Given that triclosan containing product use is continuing, it is important that monitoring in both humans and the environment is continued and that triclosan containing products are adequately labeled so that an individual can choose to avoid exposure.     

Influence of input uncertainty on prediction of within-field pesticide leaching risks

Previous research has suggested that pesticide losses at the field scale can be dominated by a small proportion of the field area. The objective of this study was to investigate whether site-specific applications (i.e. avoiding high-risk areas) at the field scale can contribute to a reduction of pesticide leaching despite uncertainty in the underlying model-based leaching risk map. Using a meta-model of the dual-permeability model MACRO, the annual average pesticide leaching concentrations were estimated for 162 sample sites on a 47 ha field. The procedure was repeated for different scenarios describing different patterns of spatial variation of degradation half-lives and the partition coefficient to soil organic carbon. To account for interpolation uncertainty, maps of predicted pesticide leaching risk were produced by the method of sequential Gaussian simulation. The results of the case study show that larger reductions of predicted leaching were achieved by site-specific application than by that of a comparable uniform dose reduction. Hence, site-specific-applications may be a feasible method to reduce pesticide leaching at the field-scale providing that the model approach gives reasonable estimates of the spatial pattern of pesticide leaching.     

Use of a column leaching test to study the mobility of chlorinated HOCs from a contaminated soil and the distribution of compounds between soluble and colloid phases

An equilibrium and recirculation column test for hydrophobic organic chemicals (ER-H test) was used to study the leaching behaviour of chlorophenols (CPs), polychlorinated diphenyl ethers (PCDEs), polychlorinated dibenzofurans (PCDFs) and polychlorinated dibenzo-p-dioxins (PCDDs) from contaminated soil. A 50% increase in the pore water velocity was shown to have little or no effect on the mobility of CPs, PCDEs, PCDFs and PCDDs. The standard deviations of truly dissolved compounds, CPs, were between 19% and 65% between the tests. However, the repeatability of the ER-H test decreased with increases in the hydrophobicity of the studied compounds; the standard deviations for PCDEs, PCDFs and PCDDs ranged from 53% to 110%, 57% to 77% and 110% to 130%, respectively. The influence of colloids on the release of these compounds was also examined. Up to 30% of the CPs in the soil were leached, of which 1-3% were associated with colloids. The PCDEs, PCDFs and PCDDs were found to be preferably associated with the particulate fraction of the leachate, and less than 0.2% of these compounds were mobilised.     

Replacing monocultures with mixed-species stands: Ecosystem service implications of two production forest alternatives in Sweden

Whereas there is evidence that mixed-species approaches to production forestry in general can provide positive outcomes relative to monocultures, it is less clear to what extent multiple benefits can be derived from specific mixed-species alternatives. To provide such insights requires evaluations of an encompassing suite of ecosystem services, biodiversity, and forest management considerations provided by specific mixtures and monocultures within a region. Here, we conduct such an assessment in Sweden by contrasting even-aged Norway spruce (Picea abies)-dominated stands, with mixed-species stands of spruce and birch (Betula pendula or B. pubescens), or spruce and Scots pine (Pinus sylvestris). By synthesizing the available evidence, we identify positive outcomes from mixtures including increased biodiversity, water quality, esthetic and recreational values, as well as reduced stand vulnerability to pest and pathogen damage. However, some uncertainties and risks were projected to increase, highlighting the importance of conducting comprehensive interdisciplinary evaluations when assessing the pros and cons of mixtures.     

Environmental monitoring and research in the Abisko area-an overview

This article gives an overview of the studies on the environment surrounding the Abisko Scientific Research Station in Swedish Lapland. The long-term monitoring of the Station on processes related to the climate, and to the physical, biotic, and chemical environmental conditions is particularly addressed. Some variables are recorded since more than 100 years. The obtained data in combination with results from short-term studies and manipulation experiments are important to understand past and future conditions of the ecosystems. This has practical applications for the planning of tourism, transports, reindeer herding, and for societal purposes.