Microsatellite analysis of albacore tuna (<Emphasis Type="Italic">Thunnus alalunga</Emphasis>): population genetic structure in the North-East Atlantic Ocean and Mediterranean Sea

Stock heterogeneity was investigated in albacore tuna (Thunnus alalunga, Bonnaterre 1788), a commercially important species in the North Atlantic Ocean and Mediterranean Sea. Twelve polymorphic microsatellite loci were examined in 581 albacore tuna from nine locations, four in the north-east Atlantic Ocean (NEA), three in the Mediterranean Sea (MED) and two in the south-western Pacific Ocean (SWP). Maximum numbers of alleles per locus ranged from 9 to 38 (sample mean, 5.2–22.6 per locus; overall mean, 14.2 ± 0.47 SE), and observed heterozygosities per locus ranged from 0.44 to 1.00 (overall mean: 0.79 ± 0.19 SE). Significant deficits of heterozygotes were observed in 20% of tests. Multilocus F _ST values were observed ranging from 0.00 to Θ = 0.036 and Θ′ = 0.253, with a mean of Θ = 0.013 and Θ′ = 0.079. Pairwise F _ST values showed that the SWP, NEA and MED stocks were significantly distinct from one another, thus corroborating findings in previous studies based on mitochondrial DNA, nuclear DNA (other than microsatellites) and allozyme analyses. Heterogeneity was observed for the first time between samples within the Mediterranean Sea. GENELAND indicated the potential presence of three populations across the NEA and two separate populations in the Mediterranean Sea. Observed genetic structure may be related to migration patterns and timing of movements of subpopulations to the feeding grounds in either summer or autumn. We suggest that a more intensive survey be conducted throughout the entire fishing season to ratify or refute the currently accepted genetic homogeneity within the NEA albacore stock.     

Parameters influencing AIS 1 neck injury outcome in frontal impacts

In order to gain more knowledge of the neck injury scenario in frontal impacts, a statistical study of parameters influencing incidences of AIS 1 neck injuries was performed. The data set consisted of 616 occupants in Volvo cars. Information regarding the crash, the safety systems, occupant characteristics (including prior neck problems), behavior and sitting posture at the time of impact, and neck symptoms (including duration) was collected and analyzed. Occupant characteristics (mainly gender, weight, and age), kinematics (head impacts) and behavior at the time of impact were identified as the most prominent parameter areas with regard to AIS 1 neck injury outcome. Specifically, women had a significantly higher AIS 1 neck injury rate as compared to men, occupants under the age of 50 had a significantly higher AIS 1 neck injury rate as compared to those above 50 and occupants weighing less than 65 kg have a significantly higher AIS 1 neck injury rate than heavier occupants. Drivers stating that they impacted their head against a frontal interior structure had a significantly higher AIS 1 neck injury rate than those without head impact. Also, occupants who stated they had tensed their neck muscles at the time of impact, had a significantly higher AIS 1 neck injury rate as compared to occupants who did not. Occupant activities, such as tightly gripping the steering wheel or straightening their arms showed a significantly increased AIS 1 neck injury rate, indicating that occupant behavior at time of impact could be influential with respect to AIS 1 neck injury outcome. Also, occupants reporting prior neck problems had a higher rate of persistent symptoms (>1 year) but no difference with respect to passing symptoms (<3 months) as compared to those without prior neck problems. Additionally, there was no distinct pattern for the duration of neck symptoms.     

Historical Weathering Based on Chemical Analyses of Two Spodosols in Southern Sweden

Chemical weathering losses were calculated for two conifer stands in relation to ongoing studies on liming effects and ash amendments on chemical status, soil solution chemistry and soil genesis. Weathering losses were based on elemental depletion trends in soil profiles since deglaciation and exposure to the weathering environment. Gradients in total geochemical composition were assumed to reflect alteration over time. Study sites were Horröd and Hasslöv in southern Sweden. Both Horröd and Hasslöv sites are located on sandy loamy Weichselian till at an altitude of 85 and 190 m a.s.l., respectively. Aliquots from volume determined samples from a number of soil levels were fused with lithium metaborate, dissolved in HNO₃, and analysed by ICP – AES. Results indicated highest cumulative weathering losses at Hasslöv. The weathering losses for the elements are in the following order:Si > Al > K > Na > Ca > MgTotal annual losses for Ca+Mg+K+Na, expressed in mmol_c m^-2 yr^-1, amounted to c. 28 and 58 at Horröd and Hasslöv, respectively. Variations between study sites could not be explained by differences in bulk density, geochemistry or mineralogy. The accumulated weathering losses since deglaciation were larger in the uppermost 15 cm than in deeper B horizons for most elements studied.     

Foreign direct investment and institutional obstacles: The case of Russian forestry

This article examines why, in spite of vast forest resources, Russia has been unable to attract foreign investors into its forest industry. A survey of 32 influential Western European forest companies indicates that purely economic factors, such as labour or raw material costs, are not the main reasons these companies refrain from investing. Instead, the companies identify a number of institutional factors: ambiguous legal systems; difficulties in negotiating with local authorities; unfair tax enforcement; and general political instability as the main impediments to FDI in the sector. These factors have led many companies to abandon previously considered investments in Russia, and also to terminate existing business relationships with Russian partners. The survey results also indicate that, while many investors in forestry were attracted by the potential for a growing Russian market in the early days of the transition period, they have become more and more aware of the many institutional obstacles challenging growth in the sector. The article concludes, therefore, that FDI in the Russian forestry sector is likely to remain low until a fundamental change takes place in the legal and political systems.     

Backset and cervical retraction capacity among occupants in a modern car

OBJECTIVES: The horizontal distance between the back of the head and the frontal of the head restraint (backset) and rearward head movement relative to the torso (cervical retraction) were studied in different occupant postures and positions in a modern car. METHODS: A stratified randomized population of 154 test subjects was studied in a Volvo V70 year model 2003 car, in driver, front passenger, and rear passenger position. In each position, the subjects adopted (i) a self-selected posture, (ii) a sagging posture, and (iii) an erect posture. Cervical retraction, backset, and vertical distance from the top of the head restraint to the occipital protuberance in the back of the head of the test subject were measured. These data were analyzed using repeated measures ANOVA and linear regression analysis with a significance level set to p < 0.05. RESULTS: In the self-selected posture, the average backset was 61 mm for drivers, 29 mm for front passengers, and 103 mm for rear passengers (p < 0.001). Women had lower mean backset (40 mm) than men (81 mm), particularly in the self-selected driving position. Backset was larger and cervical retraction capacity lower in the sagging posture than in the self-selected posture for occupants in all three occupant positions. Rear passengers had the largest backset values. Backset values decreased with increased age. The average cervical retraction capacity in self-selected posture was 35 mm for drivers, 30 mm for front passengers, and 33 mm for rear passengers (p < 0.001). CONCLUSIONS: Future design of rear-end impact protection may take these study results into account when trying to reduce backset before impact. Our results might be used for future development and use of BioRID manikins and rear-end tests in consumer rating test programs such as Euro-NCAP.     

Predictors of telomere content in dragon lizards

Telomeres shorten as a consequence of DNA replication, in particular in cells with low production of telomerase and perhaps in response to physiological stress from exposure to reactive oxygen species, such as superoxide. This process of telomere attrition is countered by innate antioxidation, such as via the production of superoxide dismutase. We studied the inheritance of telomere length in the Australian painted dragon lizard (Ctenophorus pictus) and the extent to which telomere length covaries with mass-corrected maternal reproductive investment, which reflects the level of circulating yolk precursor and antioxidant, vitellogenin. Our predictors of offspring telomere length explained 72?% of telomere variation (including interstitial telomeres if such are present). Maternal telomere length and reproductive investment were positively influencing offspring telomere length in our analyses, whereas flow cytometry-estimated superoxide level was negatively impacting offspring telomere length. We suggest that the effects of superoxide on hatchling telomere shortening may be partly balanced by transgenerational effects of vitellogenin antioxidation.     

Pollutant dispersion in idealized city models with different urban morphologies

The mechanism of pollutant dispersion in idealized city models is investigated numerically by the introduction of a uniformly distributed pollutant source at street pedestrian level. We first study three short city forms with a single main street or two crossing streets, characterized by street length/street height ratios of L/H = 6 or 7 and a street height/street width ratio of H/W = 1, including a sharp-edged round city model, a smooth-edged round city model, and a sharp-edged square city model. For short city models with a single street and a parallel approaching wind, pollutant dilution mainly depends on the horizontal flow rate which decreases along the street. This decreasing rate is smallest for the smooth-edged round city model, which results in the lowest street concentrations. For city models with two crossing streets and the approaching wind parallel to the main street, the differences in overall city form result in different dispersion processes. For a sharp-edged round city model with two crossing streets, an approaching wind slightly non-parallel to the main street generates a lower pollutant concentration in the entire street volume. We also studied a sharp-edged round city model with one narrow street (L/H = 6; H/W = 6.7), finding that the uniformly distributed pollutants are transported from two street entries to the city centre, and are then removed out across the street roof. In contrast to the short city models we studied a single-street sharp-edged long rectangular city model (L/H = 21.7; H/W = 1) in which the horizontal flow rate remained nearly constant in a region far from the two entries. Within this region the turbulence across the street roof contributed more to the pollutant removal than vertical mean flows.     

Long-term investigation of anthropogenic and naturally occurring radionuclides at reference sites in western Sweden

In case of an accidental release of radioactive substances into the environment, it is important to quickly and reliably estimate the radiation dose received by people in the affected area, and to determine the extent of the contamination. Measurements of the extent of the release and the subsequent contamination can be facilitated if there are predetermined reference sampling sites with known background radiation and inventory of radionuclides. Since 1996, 34 reference sites for soil sampling, field gamma, and intensimeter measurements have been established in western Sweden. Time series data for dose rates and radioisotope inventory have been collected at these sites, allowing for the investigation of changes in these parameters over time. The mass activity densities for the uranium and thorium series elements varied approximately between 10 and 50 Bq/kg and between 10 and 40 Bq/kg, respectively. The mass activity density of ⁴⁰K was approximately in the range 300–800 Bq/kg. The radiation exposure due to ¹³⁷Cs was rather small in this area. The dose rates calculated from in situ measurement data showed that the contribution to the total dose rate was almost entirely due to naturally occurring radionuclides. The measured dose rate was about twice as high as the calculated rate, even after subtracting the contribution from cosmic radiation. This may be explained by the fact that intensimeters generally are calibrated to measure the quantity ambient dose equivalent, which should not underestimate the effective dose.     

Porosity investigation of compacted bentonite using XRD profile modeling

Many countries intend to use compacted bentonite as a barrier in their deep geological repositories for nuclear waste. In order to describe and predict hydraulic conductivity or radionuclide transport through the bentonite barrier, fundamental understanding of the microstructure of compacted bentonite is needed. This study examined the interlayer swelling and overall microstructure of Wyoming Bentonite MX-80 and the corresponding homo-ionic Na(+) and Ca(2+) forms, using XRD with samples saturated under confined swelling conditions and free swelling conditions. For the samples saturated under confined conditions, the interparticle, or so-called free or external porosity was estimated by comparing the experimental interlayer distances obtained from one-dimensional XRD profile fitting against the maximum interlayer distances possible for the corresponding water content. The results showed that interlayer porosity dominated total porosity, irrespective of water content, and that the interparticle porosity was lower than previously reported in the literature. At compactions relevant for the saturated bentonite barrier (1.4-1.8 g/cm(3)), the interparticle porosity was estimated to ≤3%.