Towards the improvement of UN N.5 test method for the characterization of substances which in contact with water emit flammable gases

This paper deals with a sensitivity analysis of main parameters affecting the measurement of the gas flowrate emitted during testing substances for their potential to emit flammables gases in dangerous quantities where in contact with water, according to the UN N.5 test procedure. UN N.5 is described in the Manual of Tests and Criteria of United Nations (part of the Orange Book) (ONU Manual of Test and Criteria, 2008), serving both applications of international transport regulations as well as classifications of dangerous substances according to Globally the Harmonized System (GHS) and the derived regulation applying in the EU known as “CLP” Regulation (Regulation (EC) No 1271/2008). The main reason that justifies the present research is that the measurement of emitted gases is highly critical in the final classification resulting from the interpretation of the test results. Moreover, that idea has been raised to adapt the UN N.5 test protocol for classifying, in the future, substances that by contact with water would emit dangerous quantities of toxic gases.Experiments have been carried out to cover the analysis of the influence of ambient temperature, overall volume of glassware, nature of aqueous media, mass sample and sample-to-liquid mass ratio, since such parameters are not fixed within any defined range in the UN N.5 test procedure. The influence of the flow rate measuring device was also considered. Results confirm that the above mentioned parameters may play a significant role to such an extent as to finally alter the final classification resulting from the testing. Guiding principles have also been derived from our measurements and observations towards an improved and more robust UN test protocol in the future.     

Identifying best practices states in motorcycle rider education and licensing

PROBLEM: After decreasing to a historic low in 1997, motorcycle crash-related fatalities are increasing. Although causes remain unclear, motorcycle rider education and licensing play key roles in reducing motorcycle crashes and injuries. Yet, little is known about what constitutes effective rider training and licensing. This study develops a model of best practices in motorcycle rider education and licensing and combines primary and secondary data to identify states that most closely adhere to this model. Evidence on the validity of the model is also examined. METHOD: States were rated along three areas of best practices: (a) program administration; (b) rider education; and (c) licensing based on 2001 data collected for a National Highway Traffic Safety Administration (NHTSA)-sponsored study. RESULTS: Results indicate wide variation in states' adherence to best practices; several states meet most, others very few. When the areas of best practices are considered separately, a state tends to behave similarly on all three. Initial evidence supports the validity of the model, with high best practices states having the lowest rates of motorcycle fatalities. IMPACT ON TRAFFIC SAFETY: As motorcycle-related crashes increase and state and federal support for rider education programs diminishes, it is critical that states identify deficiencies in their program and learn from successful states about efficient, cost-effective strategies for increasing best practices in motorcycle rider education and licensing.     

Development of Thixotropic Coatings Using Dimerized Soybean Oil Fatty Acids: The Case of Polyamide of 1,2-Phenylene Diamine

Soybean oil (SBO) was dimerized and the crude dimer acid product reacted with 1,2-phenylene diamine at 210 ± 5 °C under inert atmosphere to obtain fatty polyamide (FPA). The FPA was used to modify a commercial alkyd resin by reacting a mixture of the alkyd resin with 5 wt% of FPA at 120 °C for 80 min under inert atmosphere. The FTIR spectrum of the FPA modified resin showed evidence of higher degree of H-bonding than was found for the unmodified alkyd. White gloss coatings of 15, 20, 25, and 30% solids were formulated from the modified and unmodified resins and examined for performance with respect to: leveling, sag resistance, drying time, pigment settling, skinning tendency and film hardness. Results showed that the unmodified alkyd coatings exhibited good leveling but poor sag resistance at all solid contents. In contrast, FPA modified alkyd coatings combined good leveling with high sag resistance indicating their thixotropic nature. A strong tendency to pigment settling was observed for unmodified alkyd coatings but was not observed in the FPA modified alkyd coatings. The modified alkyd coatings showed skinning while the unmodified alkyd coatings did not skin. A 30% solids coating formulation of the FPA modified resin showed shorter surface dry time but longer hard dry time than the unmodified alkyd resin coating.     

Ecology and Conservation of the Endangered American Burying Beetle (Nicrophorus americanus)

Field studies were conducted on the western population of the endangered American burying beetle (Nicrophorus americanus) in Oklahoma and Arkansas to determine its habitat affinities. A common cause of declining populations is some specialized adaptation that makes it difficult to respond to a rapidly changing habitat. We evaluated the hypothesis that N. americanus is a habitat specialist in its search for food, preferring mature forests with deep, humic soils. This hypothesis was rejected. Based on comparisons of niche breadth among syntopic congeners and niche overlap, N. americanus is relatively generalized in its use of a range of habitats when searching for food. It is likely that the generalist nature and the endangered status of N. americanus both derive from the fact that it is the largest member of its guild. In comparison to smaller species, N. americanus breeds on larger carcasses, which are more unpredictable in space and time. It is likely, therefore, that N. americanus must search over a larger area and greater diversity of habitats than its smaller congeners.     

Introduction History and Invasion Patterns of Ammophila arenaria on the North Coast of California

European beachgrass ( Ammophila arenaria [L] Link), introduced to stabilize sand, is fully naturalized in central and northern California and has supplanted populations of native dune plants in many areas, including the North Spit of Humboldt Bay. We interpreted air photos of the North Spit for the presence of Ammophila arenaria at three points in time: 1939/1942, 1962, and 1989. To quantify the spread and to detect invasion patterns of Ammophila , we then compiled maps using a geographic information system. We documented introduction dates and locations to improve the accuracy of our photo interpretation. Interpretation of the three photo series revealed invasion and expansion of Ammophila in both foredunes and inland dunes. The most dramatic increase in cover was found in the foredunes, whereas documented and presumed plantings were found mostly on inland dunes. Adjusting for intentional eradication, Ammophila cover on the North Spit was found to have increased between 1939 and 1989 by 574%. The square root of the area occupied by Ammophila on the North Spit increased linearly with time, conforming to biological invasion theory.     

Fire shapes and the adequacy of fire-spread models

It has been suggested that shapes of burned areas resulting from fires spreading under uniform fuel and meteorological conditions may be described as ellipses, double ellipses, or ovoids. The adequacy of these shapes (together with simulation outputs) as bases for fire spread models was tested by finding the best fits of each shape to maps of experimental fires and comparing the results with fits given by a rectangle (an unlikely fire shape). Each of the models (ellipse, double ellipse, ovoid, simulation model, and even the rectangle) provided adequate approximations to the fire contours used in the tests. The parameter trends found implied that the fires examined tended to become more nearly elliptical in shape and to have higher eccentricity as they grew.     

Book reviews

PIONEERS IN BRITISH PLANNING

Gordon Cherry (Ed.)

The Architectural Press, London, 1981. 232 pp with index and illustrations.

Price £8.95 paperback.

PLANNING PROCEDURES

John Stephenson

Northwood Books, 1982

Price £9.95 hardback, 192 pages

INDUSTRIAL LOCATION POLICY FOR ECONOMIC REVITALISATION

Morris L. Sweet

Praeger, 1981

THE POLITICS OF TOWN PLANNING

Gordon Cherry

Longmans, 1982. 165 pp.

THE POLITICS OF LOCAL GOVERNMENT IN THE UNITED KINGDOM

Alan Alexander

Longman, 1982, 143 pp. Price £3.95 paperback

LAND USE AND LIVING SPACE

Robin Best

Methuen U.P., 1981

URBAN PROJECTS MANUAL

A guide to preparing upgrading and new development projects accessable to low income groups.

Forbes Davidson and Geoff Payne (Eds)

University Press 1983 Price £7.50

LONDON'S GREEN BELT: CONTAINMENT IN PRACTICE

Richard Munton

George Allen & Unwin, 1983

OUTDOOR RECREATION AND RESOURCE MANAGEMENT

John Pigram

Croom Helm, 1983

THE IDEAL CITY — ITS ARCHITECTURAL EVOLUTION IN EUROPE

Rosenau, H.

Methuen & Co. Ltd., London & New York. Third Edition 1983. 195 pages illustrated. Hardback.

ENVIRONMENTAL HAZARDS IN THE BRITISH ISLES

A. H. Perry

George Allen and Unwin, 1981

RECREATION AND RESOURCES: LEISURE PATTERNS AND LEISURE PLACES

J. Allan Patmore

Blackwell, 1983