Brood temperature, task division and colony survival in honeybees: A model

One of the mechanisms by which honeybees regulate division of labour among their colony members is age polyethism. Here the younger bees perform in-hive tasks such as heating and the older ones carry out tasks outside the hive such as foraging. Recently it has been shown that the higher developmental temperatures of the brood, which occur in the centre of the brood nest, reduce the age at which individuals start to forage once they are adult. It is unknown whether this effect has an impact on the survival of the colony. The aim of this paper is to study the consequences of the temperature gradient on the colony survival in a model on the basis of empirical data.We created a deterministic simulation of a honeybee colony (Apis mellifera) which we tuned to our empirical data. In the model in-hive bees regulate the temperature of the brood nest by their heating activities. These temperatures determine the age of first foraging in the newly emerging bees and thus the number of in-hive bees present in the colony. The results of the model show that variation in the onset of foraging due to the different developmental temperatures has little impact on the population dynamics and on the absolute number of bees heating the nest unless we increase this effect by several times to unrealistic values, where individuals start foraging up to 10 days earlier or later. Rather than on variation in the onset of foraging due to the temperature gradient it appears that the survival of the colony depends on a minimal number of bees available for heating at the beginning of the simulation.     

长光路FTIR研究OH发生体系中的OH浓度

利用长光路ＦＴＩＲ测定早苯、三本等芳香烃化合物在烟雾箱中光化学反应衰减,确字了ＮＯｘ－Ｈ２Ｏ、Ａｉｒ、ＨＯＮＯ－Ｈ２Ｏ－Ａｉｒ和ＣＨ３ＯＮＯ－ＮＯ－Ａｉｒ３种体系在我灯自夸下的ＯＨ浓度,结果表明三者ＯＨ浓度范围分别为：～１０＾５～１０＾６、～１０＾７、～１０＾７～１０＾８ｍｏｌｅｃｕｌｅｓ．ｃｍ＾－３,并进一步讨论了反应前体物对生成ＯＨ浓度的影响。     

Documenting lemming population change in the Arctic: Can we detect trends?

Lemmings are a key component of tundra food webs and changes in their dynamics can affect the whole ecosystem. We present a comprehensive overview of lemming monitoring and research activities, and assess recent trends in lemming abundance across the circumpolar Arctic. Since 2000, lemmings have been monitored at 49 sites of which 38 are still active. The sites were not evenly distributed with notably Russia and high Arctic Canada underrepresented. Abundance was monitored at all sites, but methods and levels of precision varied greatly. Other important attributes such as health, genetic diversity and potential drivers of population change, were often not monitored. There was no evidence that lemming populations were decreasing in general, although a negative trend was detected for low arctic populations sympatric with voles. To keep the pace of arctic change, we recommend maintaining long-term programmes while harmonizing methods, improving spatial coverage and integrating an ecosystem perspective.     

The influence on the radioxenon background during the temporary suspension of operations of three major medical isotope production facilities in the Northern Hemisphere and during the start-up of another facility in the Southern Hemisphere

Medical isotope production facilities (MIPF) have recently been identified to emit the major part of the environmental radioxenon measured at many globally distributed monitoring sites deployed to strengthen the radionuclide component of the Comprehensive Nuclear-Test-Ban Treaty (CTBT) verification regime. Efforts to raise a global radioxenon emission inventory revealed that the yearly global total emission from MIPF’s is around 15 times higher than the total radioxenon emission from nuclear power plants (NPP's).Given that situation, from mid 2008 until early 2009 two out of the ordinary hemisphere-specific events occured:1) In the Northern hemisphere, a joint temporary suspension of operations of the three largest MIPF's made it possible to quantify the effects of the emissions related to NPP’s. The average activity concentrations of ¹³³Xe measured at a monitoring station close to Freiburg, Germany, went down significantly from 4.5 ± 0.5 mBq/m³ to 1.1 ± 0.1 mBq/m³ and in Stockholm, Sweden, from 2.0 ± 0.4 mBq/m³ to 1.05 ± 0.15 mBq/m³.2) In the Southern hemisphere the only radioxenon-emitting MIPF in Australia started up test production in late November 2008. During eight test runs, up to 6.2 ± 0.2 mBq/m³ of ¹³³Xe was measured at the station in Melbourne, 700 km south-west from the facility, where no radioxenon had been observed before, originating from the isotopic production process.This paper clearly confirms the hypothesis that medical isotope production facility are at present the major emitters of radioxenon to the atmosphere. Suspension of operations of these facilities indicates the scale of their normal contribution to the European radioxenon background, which decreased two to four fold. This also gives a unique opportunity to detect and investigate the influence of other local and long distance sources on the radioxenon background. Finally the opposing effect was studied: the contribution of the start-up of a renewed radiopharmaceutical facility to the build up of a radioxenon background across Australia and the Southern hemisphere.     

Structuring sustainability science

It is urgent in science and society to address climate change and other sustainability challenges such as biodiversity loss, deforestation, depletion of marine fish stocks, global ill-health, land degradation, land use change and water scarcity. Sustainability science (SS) is an attempt to bridge the natural and social sciences for seeking creative solutions to these complex challenges. In this article, we propose a research agenda that advances the methodological and theoretical understanding of what SS can be, how it can be pursued and what it can contribute. The key focus is on knowledge structuring. For that purpose, we designed a generic research platform organised as a three-dimensional matrix comprising three components: core themes (scientific understanding, sustainability goals, sustainability pathways); cross-cutting critical and problem-solving approaches; and any combination of the sustainability challenges above. As an example, we insert four sustainability challenges into the matrix (biodiversity loss, climate change, land use changes, water scarcity). Based on the matrix with the four challenges, we discuss three issues for advancing theory and methodology in SS: how new synergies across natural and social sciences can be created; how integrated theories for understanding and responding to complex sustainability issues can be developed; and how theories and concepts in economics, gender studies, geography, political science and sociology can be applied in SS. The generic research platform serves to structure and create new knowledge in SS and is a tool for exploring any set of sustainability challenges. The combined critical and problem-solving approach is essential.     

Vertical emission profiles for Europe based on plume rise calculations

The vertical allocation of emissions has a major impact on results of Chemistry Transport Models. However, in Europe it is still common to use fixed vertical profiles based on rough estimates to determine the emission height of point sources. This publication introduces a set of new vertical profiles for the use in chemistry transport modeling that were created from hourly gridded emissions calculated by the SMOKE for Europe emission model. SMOKE uses plume rise calculations to determine effective emission heights. Out of more than 40 000 different vertical emission profiles 73 have been chosen by means of hierarchical cluster analysis. These profiles show large differences to those currently used in many emission models. Emissions from combustion processes are released in much lower altitudes while those from production processes are allocated to higher altitudes. The profiles have a high temporal and spatial variability which is not represented by currently used profiles.     

Bioremediation of benzene-, MTBE- and ammonia-contaminated groundwater with pilot-scale constructed wetlands

In this pilot-scale constructed wetland (CW) study for treating groundwater contaminated with benzene, MTBE, and ammonia-N, the performance of two types of CWs (a wetland with gravel matrix and a plant root mat) was investigated. Hypothesized stimulative effects of filter material additives (charcoal, iron(III)) on pollutant removal were also tested. Increased contaminant loss was found during summer; the best treatment performance was achieved by the plant root mat. Concentration decrease in the planted gravel filter/plant root mat, respectively, amounted to 81/99% for benzene, 17/82% for MTBE, and 54/41% for ammonia-N at calculated inflow loads of 525/603 mg/m²/d, 97/112 mg/m²/d, and 1167/1342 mg/m²/d for benzene, MTBE, and ammonia-N. Filter additives did not improve contaminant depletion, although sorption processes were observed and elevated iron(II) formation indicated iron reduction. Bacterial and stable isotope analysis provided evidence for microbial benzene degradation in the CW, emphasizing the promising potential of this treatment technique.     

Elemental analysis of printed circuit boards considering the ROHS regulations

The EU RoHS Directive (2002/95/EC of the European Parliament and of the Council) bans the placing of new electrical and electronic equipment containing more than agreed levels of lead, cadmium, mercury, hexavalent chromium, polybrominated biphenyl (PBB) and polybrominated diphenyl ether (PBDE) flame retardants on the EU market. It necessitates methods for the evaluation of RoHS compliance of assembled electronic equipment. In this study mounted printed circuit boards from personal computers were analyzed on their content of the three elements Cd, Pb and Hg which were limited by the EU RoHS directive. Main focus of the investigations was the influence of sample pre-treatment on the precision and reproducibility of the results. The sample preparation steps used were based on the guidelines given in EN 62321. Five different types of dissolution procedures were tested on different subsequent steps of sample treatment like cutting and milling. Elemental analysis was carried out using ICP-OES, XRF and CV-AFS (Hg). The results obtained showed that for decision-making with respect to RoHS compliance a size reduction of the material to be analyzed to particles ?1.5 mm can already be sufficient. However, to ensure analytical results with relative standard deviations of less than 20%, as recommended by the EN 62321, a much larger effort for sample processing towards smaller particle sizes might be required which strongly depends on the mass fraction of the element under investigation.     

Air Quality Modeling and Decisions for Ozone Reduction Strategies

Abstract

Despite the widespread application of photochemical air quality models (AQMs) in U.S. state implementation planning (SIP) for attainment of the ambient ozone standard, documentation for the reliability of projections has remained highly subjective. An “idealized” evaluation framework is proposed that provides a means for assessing reliability. Applied to 18 cases of regulatory modeling in the early 1990s in North America, a comparative review of these applications is reported. The intercomparisons suggest that more than two thirds of these AQM applications suffered from having inadequate air quality and meteorological databases. Emissions representations often were unreliable; uncertainties were too high. More than two thirds of the performance evaluation efforts were judged to be substandard compared with idealized goals. Meteorological conditions chosen according regulatory guidelines were limited to one or two cases and tended to be similar, thus limiting the extent to which public policy makers could be confident that the emission controls adopted would yield attainment for a broad range of adverse atmospheric conditions. More than half of the studies reviewed did not give sufficient attention to addressing the potential for compensating errors. Corroborative analyses were conducted in only one of the 18 studies reviewed. Insufficient attention was given to the estimation of model and/or input database errors, uncertainties, or variability in all of the cases examined. However, recent SIP and policy‐related regional modeling provides evidence of substantial improvements in the underlying science and available modeling systems used for regulatory decision making. Nevertheless, the availability of suitable databases to support increasingly sophisticated modeling continues to be a concern for many locations. Thus, AQM results may still be subject to significant uncertainties. The evaluative process used here provides a framework for modelers and public policy makers to assess the adequacy of contemporary and future modeling work.     

Dynamics of Policy Networks. The Case of Organic Farming Policy in the Czech Republic

To better understand the potential for successful and long-term establishment of environmental policy, the aim of this paper is to explore the network dynamics of a policy field that has become well established in the EU: organic farming. We look at the dynamics of the organic farming policy network in the Czech Republic over a period of 10 years by applying a comparative formal network analysis. We focused in particular on the distribution of power between actors and how capacities of policy actors have evolved between 2004 (its year of accession to the EU) and 2014. We conclude that the organic farming policy network in the Czech Republic has been highly dynamic and has changed from one that was decidedly influenced by organic sector organizations to a network centralized around the Ministry of Agriculture. However, the organic farming organization managed to maintain its good reputation for competence in organic farming policy, which creates opportunities for the organization to remain active in the policy debate.