Formation of indoor nitrous acid (HONO) by light-induced NO<Subscript>2</Subscript> heterogeneous reactions with white wall paint

Gaseous nitrogen dioxide (NO₂) represents an oxidant that is present in relatively high concentrations in various indoor settings. Remarkably increased NO₂ levels up to 1.5 ppm are associated with homes using gas stoves. The heterogeneous reactions of NO₂ with adsorbed water on surfaces lead to the generation of nitrous acid (HONO). Here, we present a HONO source induced by heterogeneous reactions of NO₂ with selected indoor paint surfaces in the presence of light (300 nm?<?λ?<?400 nm). We demonstrate that the formation of HONO is much more pronounced at elevated relative humidity. In the presence of light (5.5 W m^?2), an increase of HONO production rate of up to 8.6?·?10⁹ molecules cm^?2 s^?1 was observed at [NO₂]?=?60 ppb and 50 % relative humidity (RH). At higher light intensity of 10.6 (W m^?2), the HONO production rate increased to 2.1?·?10¹⁰ molecules cm^?2 s^?1. A high NO₂ to HONO conversion yield of up to 84 % was observed. This result strongly suggests that a light-driven process of indoor HONO production is operational. This work highlights the potential of paint surfaces to generate HONO within indoor environments by light-induced NO₂ heterogeneous reactions.     

Characterisation of microbial activity in the framework of natural attenuation without groundwater monitoring wells?: a new Direct-Push probe

At many contaminated field sites in Europe, monitored natural attenuation is a feasible site remediation option. Natural attenuation includes several processes but only the microbial degradation leads to real contaminant removal and very few methods are accepted by the authorities providing real evidence of microbial contaminant degradation activity. One of those methods is the recently developed in situ microcosm approach (BACTRAP®). These in situ microcosms consist of perforated stainless steel cages or PTFE tubes filled with an activated carbon matrix that is amended with ¹³C-labelled contaminants; the microcosms are then exposed within groundwater monitoring wells. Based on this approach, natural attenuation was accepted by authorities as a site remediation option for the BTEX-polluted site Zeitz in Germany. Currently, the in situ microcosms are restricted to the use inside groundwater monitoring wells at the level of the aquifer. The (classical) system therefore is only applicable on field sites with a network of monitoring wells, and only microbial activity inside the monitoring wells at the level of the aquifer can be assessed. In order to overcome these limitations, a new Direct-Push BACTRAP probe was developed on the basis of the Geoprobe® equipment. With respect to the mechanical boundary conditions of the DP technique, these new probes were constructed in a rugged and segmented manner and are adaptable to various sampling concepts. With this new probe, the approach can be extended to field sites without existing monitoring wells, and microbial activity was demonstrated to be measureable even under very dry conditions inside the vadose zone above the aquifer. In a field test, classical and Direct-Push BACTRAPs were applied in the BTEX-contaminated aquifer at the ModelPROBE reference site Zeitz (Germany). Both types of BACTRAPs were incubated in the centre and at the fringe of the BTEX plume. Analysis of phospholipid fatty acid (PLFA) patterns showed that the bacterial communities on DP-BACTRAPs were more similar to the soil than those found on classical BACTRAPs. During microbial degradation of the ¹³C-labelled substrate on the carrier material of the microcosms, the label was only slightly incorporated into bacterial biomass, as determined by PLFA analysis. This provides clear indication for decreased in situ natural attenuation potential in comparison to earlier sampling campaigns, which is presumably caused by a large-scale source remediation measure in the meantime. In conclusion, Direct-Push-based BACTRAPs offer a promising way to monitor natural attenuation or remediation success at field sites which are currently inaccessible by the technique due to the lack of monitoring wells or due to a main contamination present within the vadose zone.     

Pilot-Scale Demonstration of an Innovative Treatment for Vapor Emissions

ABSTRACT

Researchers from the National Renewable Energy Laboratory recently conducted a pilot-scale study at McClellan Air Force Base (AFB) in Sacramento, CA. The objective of the test was to determine the effectiveness of an ambient-temperature, solar-powered photocatalytic oxidation treatment unit for destroying emissions of chlorinated organic compounds from an air stripper. This paper reports test results and discusses applications and limitations of the technology.

A 10-standard-cubic-foot-per-minute (SCFM) (28.3 L/min) slip stream of air from an air stripper at Operative Unit 29-31 at McClellan AFB was passed through a reactor that contained a lightweight, perforated, inert support coated with photoactive titanium dioxide. The reactor faced south and was tilted at a 45° angle from vertical so that the light-activated catalyst received most of the available sunlight. An online portable gas chro-matograph with two identical columns simultaneously analyzed the volatile organic compounds contained in the reactor inlet and outlet air streams. Summa canister grab samples of the inlet and outlet were also collected and sent to a certified laboratory for U.S. Environmental

Protection Agency Method TO-14 analysis and verification of our field analyses. Three weeks of testing demonstrated that the treatment system's destruction and removal efficiencies (DREs) are greater than 95% at 10 SCFM with UV intensities at or greater than 1.5 milliwatts/square centimeter (mW/cm²). DREs greater than 95% at 20 SCFM were obtained under conditions where UV irradiation measured at or greater than 2 mW/cm². In Sacramento, this provided 6 hours of operation per clear or nearly clear day in April. A solar tracking system could extend operating time. The air stream also contained trace amounts of benzene. We observed no loss of system performance during testing.     

Impact of genetic diversity and inbreeding on the life-history of Chironomus midges over consecutive generations

We report results of a multigenerational experiment with Chironomus riparius. Two strains with a high and a low level of genetic variability were exposed to a low, environmentally relevant TBT concentration of 80 μg Sn kg⁻¹ sediment dw nominally (time weighted mean, based on measured concentrations: 4.5 μg Sn kg⁻¹ sediment dw), and various life history traits as well as genetic diversity were monitored for eleven consecutive generations. While TBT effects are hardly visible in the outbred and genetically diverse strain, the inbred and genetically impoverished strain shows a clearly reduced population growth rate compared to the control. Moreover, the impoverished strain shows an increase in fitness over time. Analyses of variation at five microsatellite loci revealed that the level of genetic variation is strongly reduced in the inbred compared to the outbred strain. Moreover, genetic diversity increases over time in the inbred strain. This finding explains the observed increase in fitness in both inbred lineages (control and TBT exposed). The results document that inbreeding and the level of genetic diversity might be of crucial importance in populations under pollution stress. Furthermore, ecotoxicological bioassays have to consider genetic diversity if results between laboratories should be comparable. Our data provides evidence that genetic diversity strongly contributes to the survival of a population exposed to chemical pollution.     

Solubilities of selected organic electronic materials in pressurized hot water and estimations of aqueous solubilities at 298.15 K

Increasing production and disposal of organic light-emitting diode (OLED) displays for smartphones and tablets may have impact on the environment depending on the aqueous solubility of the pertinent chemicals. Here, aqueous solubilities are presented for several compounds, mostly aromatic amines, used as hole transport materials in the OLED displays. Solute selection includes 1,4-bis(diphenylamino)benzene, tetra-N-phenylbenzidine, 4,4′-bis(N-carbazolyl)-1,1′-biphenyl, 1,3,5-tris(diphenylamino)benzene, and 9,10-bis(phenylethynyl)anthracene. The solubilities are those in pressurized hot water (PHW), i.e., measured at elevated temperature (up to 260 °C) and pressure. The semi-quantitative estimates of room-temperature solubilities of the solutes have been obtained from extrapolations of the solubilities in PHW. For the compounds studied, the estimated aqueous solubilities at room temperature do not exceed 2 × 10^?11 g of the solute per 1 kg of water. Aqueous solubilities of triphenylamine have also been measured and used to upgrade a recent group-contribution model of aqueous solubilities of organic nonelectrolytes with the parameters for the nitrogen atom in aromatic amines.     

Distribution patterns of plants explained by human movement behaviour

Distribution patterns of plants are affected by human activities such as creation, destruction or modification of habitats. However, another important question is to what extent humans shape plant distributions by acting as dispersal vectors. In order to answer this question we developed a simulation model for the spread of plant species between human settlements. This was done on the basis of extensive sociological and ecological data on a regional scale. With regard to the sociological data, human movement behaviour defined the amount of exchange between the settlements. Gardening types represented the potential habitat in our model. The ecological data was derived from a vegetation survey carried out in 2003, which was a repeat of a survey between 1974 and 1981 along the same transects. From these surveys, we studied the distributions of 13 species in 67 settlements. In our model, the earlier survey provided the data for the initial distribution. The simulated pattern was consequently compared with the distribution pattern in 2003. In the model, dispersal kernels based on patterns of human movement between settlements led to a better match with the distribution patterns than a null model simulating pure distance dependent dispersal for all species. This was statistically significant for seven of the thirteen species. A striking result was that alien species seem to benefit more from human dispersal than native species. We emphasize the importance of the sociological data on human movement behaviour in parameterizing our regional scale model. This study provides quantitative evidence on the impact of human movement behaviour on the distribution of plant species in suburban areas.     

Human impacts on fire occurrence: a case study of hundred years of forest fires in a dry alpine valley in Switzerland

Forest fire regimes are sensitive to alterations of climate, fuel load, and ignition sources. We investigated the impact of human activities and climate on fire occurrence in a dry continental valley of the Swiss Alps (Valais) by relating fire occurrence to population and road density, biomass removal by livestock grazing and wood harvest, temperature and precipitation in two distinct periods (1904–1955 and 1956–2006) using generalized additive modeling. This study provides evidence for the role played by humans and temperature in shaping fire occurrence. The existence of ignition sources promotes fire occurrence to a certain extent only; for example, high road density tends to be related to fewer fires. Changes in forest uses within the study region seem to be particularly important. Fire occurrence appears to have been negatively associated with livestock pasturing in the forest and wood harvesting, in particular during the period 1904–1955. This study illustrates consistently how fire occurrence has been influenced by land use and socioeconomic conditions. It also suggests that there is no straightforward linear relationship between human factors and fire occurrence.     

Compliance and Emissions Trading under the Kyoto Protocol: Rules for Uncertain Inventories

A solution is proposed for proving compliance with emission targets and for emissions trading in the event of uncertainties in reported emission inventories. The solution is based on the undershooting concept, from which the mathematical conditions for both proving compliance with a risk α and calculating effective emissions for trading are derived. Based on the reported emission units, the number of permits granted is reduced in proportion to the uncertainty in the inventory. A country whose inventory has higher uncertainty is thereby allotted fewer permits than a country with the same inventory but smaller uncertainty.     

Integrating energy efficiency performance in production management – gap analysis between industrial needs and scientific literature

For governments and for manufacturing companies, global warming, rising energy prices, and customers’ increasing ecological awareness have pushed energy efficient manufacturing to the top of the agenda. Governments and companies are both striving to identify the most effective measures to increase energy efficiency in manufacturing processes. Based on results of a recent EU-funded roadmapping project, this paper highlights the needs of industrial companies for integrating energy efficiency performance in production management. First, it analyses concepts and tools for measurement, control and improvement of energy efficiency in production management proposed in literature. Second, the paper outlines that ICT tools and standardization are important enablers for energy efficient manufacturing. Third, industrial needs in these areas are presented based on expert interviews. The industrial needs thus identified are contrasted with concepts proposed in literature to point out the implementation gaps between practice and theory. The paper demonstrates that there exists a gap between the solutions available and the actual implementation in industrial companies. It concludes by deriving requirements for energy management in production that future collaborative research projects should address.