Behavioral variation shows heritability in juvenile brown trout Salmo trutta

Animal personalities (sometimes referred also as coping styles) and their fitness consequences are currently among the most intensively explored subjects in behavioral ecology. To estimate the evolvability and adaptability of individually consistent behavioral variation, there is a crucial need to quantify the genetics underlying personality. Here, we experimentally studied the repeatability of various individual behaviors and then estimated heritability of formed boldness, exploration, and aggression components in juvenile brown trout Salmo trutta in standardized laboratory environment. Principal component analysis indicated that individually recorded behaviors were described by two personality axes: the first reflecting boldness, exploration, and aggression and the second tendency to freeze. These personality components, as well as the originally recorded behaviors, were statistically significantly repeatable over time. The latter PC, but not the first one, was statistically significantly heritable, though at low level (h ²?=?0.142?±?0.096). These results suggest that additive genetic variation underlies phenotypically consistent behavioral patterns, proposing that any selection acting on behavior, stress tolerance, or correlated traits has a potential to induce evolution in fish personality.     

Body mass dependence of glycogen stores in the anoxia-tolerant crucian carp (<Emphasis Type="Italic">Carassius carassius</Emphasis> L.)

Glycogen is a vital energy substrate for anaerobic organisms, and the size of glycogen stores can be a limiting factor for anoxia tolerance of animals. To this end, glycogen stores in 12 different tissues of the crucian carp (Carassius carassius L.), an anoxia-tolerant fish species, were examined. Glycogen content of different tissues was 2–10 times higher in winter (0.68–18.20% of tissue wet weight) than in summer (0.12–4.23%). In scale, bone and brain glycogen stores were strongly dependent on body mass (range between 0.6 and 785 g), small fish having significantly more glycogen than large fish (p < 0.05). In fin and skin, size dependence was evident in winter, but not in summer, while in other tissues (ventricle, atrium, intestine, liver, muscle, and spleen), no size dependence was found. The liver was much bigger in small than large fish (p < 0.001), and there was a prominent enlargement of the liver in winter irrespective of fish size. As a consequence, the whole body glycogen reserves, measured as a sum of glycogen from different tissues, varied from 6.1% of the body mass in the 1-g fish to 2.0% in the 800-g fish. Since anaerobic metabolic rate scales down with body size, the whole body glycogen reserves could provide energy for approximately 79 and 88 days of anoxia in small and large fish, respectively. There was, however, a drastic difference in tissue distribution of glycogen between large and small fish: in the small fish, the liver was the major glycogen store (68% of the stores), while in the large fish, the white myotomal muscle was the principal deposit of glycogen (57%). Since muscle glycogen is considered to be unavailable for blood glucose regulation, its usefulness in anoxia tolerance of the large crucian carp might be limited, although not excluded. Therefore, mobilization of muscle glycogen under anoxia needs to be rigorously tested.     

Industrial symbiosis and the policy instruments of sustainable consumption and production

Industrial symbioses (ISs) and eco-industrial parks (EIPs) are key concepts of industrial ecology (IE). The aim of ISs and EIPs is to minimise inefficient material and energy use by utilising local by-product and energy flows. Industrial symbioses tend to develop through spontaneous action of economic actors, for gaining of economic benefit, but these systems can be designed and promoted via policy instruments as well. A literature review showed that national programmes for eco-industrial parks can be found in different parts of the world. In the action programmes and other sustainable consumption and production (SCP) policy documents of the EU, on the other hand, industrial symbioses gain less recognition as a path to enhanced sustainable production. In this article, we consider this and also analyse how the evolution and environmental performance of an industrial symbiosis system centred on a Finnish pulp and paper mill have been affected by SCP policy instruments. With regard to the system forming the subject of the case study, and Finnish industrial systems in general, policy instruments have succeeded in reducing emissions but not in systematically encouraging operators toward symbiosis-like activities. All in all, few studies exist on the overall impact of policy instruments promoting design of eco-industrial parks. It is not self-evident that symbiosis-like production systems would be sustainable in every case, as the background assumptions for political promotion of EIPs suggest. We concluded that industrial symbioses should be analysed and developed on a life cycle basis, with documentation of the real environmental benefits due to efficient resource use and decreased emissions in comparison to standalone production. ISs can then bring eco-competitiveness to companies in relation to SCP tools, such as environmental permits, ecolabels, and future product regulation based on the Ecodesign Directive in Europe. Indirect encouragement of symbiosis through land-use regulation and planning, in such a way that material fluxes between companies are possible both in operations and in financial terms, may prove effective. The same holds for waste policies that encourage increased reuse of a company’s waste by other enterprises.     

Experiences from harvest-driven conservation: Management of Amazonian river turtles as a common-pool resource

Understanding what causes variability in the outcomes of common-pool resources management and governance has important policy implications for biodiversity conservation, in particular for the conservation of wild plants and animals subject to harvest. We report an exploratory study focusing on Amazonian river turtles as a common-pool resource under harvest-driven conservation and management efforts in Peru. Based on document analysis, literature review and a series of interviews, we describe the management program as a social process and identify the most important governance and management outcomes achieved (increased turtle abundance and benefits for harvesters, harvester formalization), factors hindering and facilitating the program implementation (four natural and three societal factors), and key governance actions behind the program outcomes (awareness and capacity building, crafting and enforcing rules). We then highlight the existing knowledge gaps and the needs and possible means to address particular risks related to turtle management on a harvest-driven setting.     

Assessing the effects of domestic and international energy scenarios and emission reduction strategies on acidification in Finland

An integrated model system was developed and used to assess the effects of alternative energy production scenarios and reduction policies on acidification of lakes and forest soils in Finland. The analysis covered different energy scenarios and resulting emissions of sulfur oxides and nitrogen oxides in Finland, as well as ammonia emissions with various control requirements. In addition, emission reduction scenarios of varied ambition levels in the bordering areas of Finland and in other parts of Europe were included in the analysis. The impacts of the different scenarios were quantified with exceedances of critical loads for acidification and with the total areas where the critical loads are exceeded. The possibilities for reducing the areas with critical load exceedances with national or bilateral measures were investigated. The differences in areas at risk, if depositions from domestic and nearby sources are estimated with a regional model and point-source databases or with a continental scale model and coarser-scale emission data, were analyzed. The reasons for the differences and the implications for national-level assessment are discussed.     

Subgroups exposed to systematically different elemental compositions of PM2.5

Identification of exposure subgroups is important for both health-based assessments where health effects are linked to the elemental composition of PM_2.5 mixture to which participants are exposed, and for development of population exposure models where population exposures to PM_2.5 mass are modeled generally using fixed site ambient monitoring. Here we demonstrate that workplace sources dominate PM_2.5 mass in the upper end of the distribution for EXPOLIS participants in Athens, Basel, Helsinki and Oxford, resulting in poor performance of models that use ambient concentrations to predict exposures when predicting higher exposures, where adverse health impacts would be more likely. Further, since different microenvironments reflect differing contributions from local PM_2.5 sources, personal PM_2.5 exposures for participants whose exposures are dominated by different microenvironments show systematically different elemental personal compositions. Perhaps a more significant complication for epidemiologic associations is that the proportion of participants whose exposures are dominated by each microenvironment varies across the exposure distribution to PM_2.5. Participants exposed predominantly in the outdoor or personal microenvironments are a greater fraction of the lower end of the PM_2.5 exposure distribution while participants with dominant workplace environments are a greater fraction of the upper end of the distribution, with corresponding differences in elemental compositions of PM_2.5 exposures across the exposure distribution.     

Evaluation of the European population intake fractions for European and Finnish anthropogenic primary fine particulate matter emissions

The intake fraction (iF) has been defined as the integrated incremental intake of a pollutant released from a source category or region summed over all exposed individuals. In this study we evaluated the iFs in the population of Europe for emissions of anthropogenic primary fine particulate matter (PM_2.5) from sources in Europe, with a more detailed analysis of the iF from Finnish sources. Parameters for calculating the iFs include the emission strengths, the predicted atmospheric concentrations, European population data, and the average breathing rate per person. Emissions for the whole of Europe and Finland were based on the inventories of the European Monitoring and Evaluation Programme (EMEP) and the Finnish Regional Emission Scenario (FRES) model, respectively. The atmospheric dispersion of primary PM_2.5 was computed using the regional-scale dispersion model SILAM. The iFs from Finnish sources were also computed separately for six emission source categories. The iFs corresponding to the primary PM_2.5 emissions from the European countries for the whole population of Europe were generally highest for the densely populated Western European countries, second highest for the Eastern and Southern European countries, and lowest for the Northern European and Baltic countries. For the entire European population, the iF values varied from the lowest value of 0.31 per million for emissions from Cyprus, to the highest value of 4.42 per million for emissions from Belgium. These results depend on the regional distribution of the population and the prevailing long-term meteorological conditions. Regarding Finnish primary PM_2.5 emissions, the iF was highest for traffic emissions (0.68 per million) and lowest for major power plant emissions (0.50 per million). The results provide new information that can be used to find the most cost-efficient emission abatement strategies and policies.     

Water management in Angkor: human impacts on hydrology and sediment transportation

The city of Angkor, capital of the Khmer empire from the 9th to 15th century CE, is well known for its impressive temples, but recent research has uncovered an extensive channel network stretching across over 1000 km2. The channel network with large reservoirs (termed baray) formed the structure of the city and was the basis for its water management. The annual long dry season associated with the monsoon climate has challenged water management for centuries, and the extensive water management system must have played an important role in the mitigation of such marked seasonality. However, by changing the natural water courses with off-take channels the original catchments were also reshaped. Moreover, severe problems of erosion and sedimentation in human built channels evolved and impacted on the whole water management system. This paper describes the present hydrology of the area and discusses the impacts of water management on hydrology during the Angkor era. The paper, moreover, attempts to summarise lessons that could be learnt from Angkorian water management that might apply to present challenges within the field.     

Sedimentation of PCDD/Fs and PCBs in the Gulf of Finland and the Gulf of Bothnia,the Baltic Sea

Sediment trap material was collected during May–December in the period 1996–2008 in three coastal areas and four open sea stations in the Finnish territory of the Baltic Sea. The highest sedimentation of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) with a typical source-related congener profile from chlorophenol production dominated by highly chlorinated dibenzofurans was found close to a historical source in the Kymijoki estuary. This was an order of magnitude higher than in other river estuaries and two orders of magnitude higher than in the open sea stations. The sedimentation of polychlorinated biphenyls (PCBs) was also higher in river estuaries than in other areas. No significant decrease over a 12 year period of monitoring was found in concentration or in sedimentation in the Kymijoki estuary. In the western Gulf of Finland, the Archipelago Sea and the Gulf of Bothnia, the dominating congeners, calculated as toxic equivalent (TEQ) in sedimentation were 1, 2, 3, 7, 8-PeCDD and 2, 3, 4, 7, 8-PeCDF, often reported as the main congeners in deposition.     

A Comparison of Tailpipe,Dilution Tunnel,and Wind Tunnel Data in Measuring Motor Vehicle PM

ABSTRACT

Comparison between particle size distributions recorded directly at the tailpipes of both diesel and gasoline vehicles and measurements made using a conventional dilution tunnel reveals two problems incurred when using the latter method for studying particle number emissions. One is the potential for particulate matter (PM) artifacts originating from hydrocarbon material stored in the transfer hose connecting the tailpipe to the dilution tunnel, and the other is the particle coagulation (as well as condensation and chemical changes) that occurs during the transport. Both are potentially generic to current PM emissions measurement practices. The artifacts typically occur as a nanoparticle mode (10–30 nm) that is 2–4 orders of magnitude larger than what is present in the vehicle exhaust and can easily be mistaken for a similar mode that can arise from the nucleation of hydrocarbon or SO₄ ^2-components in the exhaust under appropriate dilution rates. Wind tunnel measurements are in good agreement with those made directly from the tailpipe and substantiate the potential for artifacts. They reveal PM levels for the recent model port fuel injection (PFI) gasoline vehicles tested that are small compared with the ambient background particle level during steady-state driving. The PM emissions recorded for drive cycles such as the Federal Test Procedure (FTP) and US06 occur primarily during acceleration, as has been previously noted. Light-duty diesel vehicle emissions normally exhibit a single lognormal mode centered between 55 and 80 nm, although a nonartifact nanoparticle mode in some cases appears at a 70-mph cruise up a grade.