Evaluation of the effectiveness of red mud-supported catalysts in combination with ozone and TiO<Subscript>2</Subscript> in the treatment of solution containing benzene,toluene, and xylene

Ozone and a Fe²⁺/TiO₂-based catalyst were examined in the degradation of a synthetic solution of benzene toluene and xylene (BTX) in an advanced oxidation process (AOP). The catalyst beads were made from the slurry waste of aluminum production process, by inserting the TiO₂ content and subsequent calcination. The reduction of the BTX concentration load was monitored by the reduction of chemical oxygen demand (COD) and BTX concentration. Different levels were used on factors: pH, time of treatment, initial concentration of BTX, and percentage of TiO₂. The process was conducted in a bubble column reactor with the insertion of catalyst beads. A response surface methodology technique (CCD) was used to build a model based on COD reduction results. The model was optimized using the normal-boundary intersection (NBI) algorithm to maximize COD reduction and minimize the variance attributed to the process. Optimization led to COD reductions of 80% in 2 h of experiment. Correlation analysis of coefficient models from experimental data R²_adj was 0.9966, showing a good fit of model data. In the optimized conditions, the possible increase of the biodegradability ratio of the BTX solution, through the biochemical oxygen demand (BOD) and COD, was also analyzed. Under pre-treatment conditions, the BOD/COD ratio was 0.13. After the treatment, it increased to 0.56.

Open image in new window

Graphical abstract ?

     

Simultaneous radioassays of bacterial production and mercury methylation in the periphyton of a tropical and a temperate wetland

Laboratory radioassays were made to study mercury (Hg) methylation together with bacterial production in the periphyton of two aquatic macrophytes, the submerged Myriophyllum spicatum, from a constructed wetland in Sweden and the floating Eichhornia crassipes, from a eutrophied tropical lake in Brazil. Time course incubations were made by addition of (203)HgCl(2) and the methylmercury formed was extracted at pre-defined time intervals. Bacterial production ((14)C-leucine incorporation) was measured at the same time intervals, with plants removed from parallel incubations made with and without addition of cold HgCl(2). For E. crassipes, higher methylmercury production was observed at elevated bacterial production, whereas for M. spicatum, the bacterial production was significantly lower, and Hg methylation was below the detection limit. The combined results confirm the importance of microbial processes for Hg methylation, although other factors are known to influence this process in complex ways. The addition of Hg did not significantly influence bacterial production, while the incubation temperatures used (25 and 35 degrees C) resulted in different methylation rates. Radiotracer techniques for measurements of bacterial production such as (14)C-leucine uptake can provide useful insights into the Hg cycle in aquatic environments, and our data suggest that they may be used as a proxy of mercury methylation potentials.     

Development of a new automated clean-up system for the simultaneous analysis of polychlorinated dibenzo-p-dioxins (PCDDs), dibenzofurans (PCDFs) and 'dioxin-like' polychlorinated biphenyls (dl-PCB) in flue gas emissions by GPC-SPE

A comprehensive clean-up method for quantitative analysis of polychlorinated biphenyls (PCBs) and polychlorinated dibenzo-p-dioxins and dibenzo-furans (PCDD/Fs) in one single extract of environmental samples was developed. Since the chemical nature and toxicity of planar PCBs are similar to those of PCDD/Fs, dioxin-like PCBs and PCDD/Fs are often surveyed together in their exposure assessments. The development of a method for the simultaneous analysis of PCBs and PCDD/Fs in environmental samples is invaluable. The automated clean-up system evaluated in this work consists of three additional steps after traditional extraction: the chromatography on gel permeation (GPC), the concentration of the solvent through the use of an in-line evaporation module and the further purification and separation of PCDDs/Fs and dl-PCBs on an alumina cartridge in the 'SPE module'. In this work, three fly ash samples from an interlaboratory study with different PCDD/F and PCB levels were Soxhlet-extracted and then cleaned up using an automated system. PCDD/Fs and PCBs were determined using isotope dilution and high resolution gas chromatography/high resolution mass spectrometry. The determined values of 17 PCDD/Fs were consistent with the certified values and the relative standard deviations (RSDs) of the determined values were less than 20%. The recoveries of (13)C labeled PCDD/Fs and planar PCBs, and their RSDs were within the ranges specified in EPA1613 and 1668a methods, respectively. An accurate and reliable method was successfully developed and can be used in the simultaneous analysis of PCDD/Fs and planar PCBs in environmental samples.     

Concentration of Cd, Cu, Pb, Zn, Al, and Fe in soils of Manresa, NE Spain

The aims of this study were to determine the contents of cadmium (Cd), copper (Cu), lead (Pb), zinc (Zn), aluminium (Al), and iron (Fe) (aqua regia-extractable) in 27 soil plots (54 samples) from Manresa, NE Spain, and to establish relationships between heavy metals and some soil properties. The main soil types were surveyed and the median concentrations (mg kg(-1)) obtained were Cd 0.28, Cu 20.3, Pb 18.6, Zn 67.4, Al 22,572, and Fe 21,551. Element concentrations for these soils were lower than the published values for the Valencia region (Spain) and Torrelles and Sant Climent municipal districts (Catalonia, Spain). In terms of soil properties, the results of this study suggest that, in Manresa soils, both trace element adsorption and retention are influenced by several properties such as clay minerals, carbonates, organic matter, and pH. All element contents were positively correlated with clay content. Pb and Zn were negatively correlated with pH and CaCO(3).     

Characterisation of sulphide-bearing waste-rock dumps using electrical resistivity imaging: the case study of the Rio Marina mining district (Elba Island, Italy)

Sulphide-bearing mine dumps are potential sources of pollution when acid mine drainage (AMD) occurs. Because the generation of AMD depends on the volume and composition of waste materials, their characterisation is crucial for the evaluation of geochemical hazards and for the design of remediation strategies to minimise their environmental impact. In this paper, a cost-effective strategy for the characterisation of an inactive mine dump in the Rio Marina mining district (Elba Island, Italy) using earth resistivity imaging (ERI) is presented. As no information regarding the nature of waste rocks is found in reports for the mine, five ERI profiles were acquired at the top of the waste pile. The results show that waste rocks are heterogeneous with a maximum thickness of 30 m. Due to the large amounts of dispersed sulphide minerals, the waste rocks are characterised by an electrically conductive geophysical signature in comparison to the surrounding resistive metamorphic bedrock. A geostatistical approach was adopted to estimate the elevation of the edges of the mine dump, and the net volume of the waste rocks was computed through a raster analysis of the elevations of the upper and lower boundaries of the mine dump. High-conductivity anomalies were detected within the core of the mine dump. The integration of the hydrogeological, geochemical and geological framework of the Rio Marina mining district suggests that these anomalies could be a geophysical signature of subsurface regions where AMD is currently generated or stored, thus representing sources of environmental pollution.     

Dynamic emergy evaluation of a fish farm rearing process

The environmental sustainability of a fish farm rearing process was examined by means of emergy analysis. Many emergy analyses integrate data for a whole year smoothing short term variations and sometimes losing meaningful information (aliasing). For this reason we developed a model for an instantaneous emergy evaluation in an aquacultural system so that transformities, efficiency and effort spent at each moment during the fish rearing activity could be calculated. By means of the model and dynamic emergy calculations it is possible to recognize step by step the importance of the various emergy contributions and verify where and when to modify the system to move toward optimum production of a sustainable product. By the application of the model we confirmed that the emergy trends in a fish farm installation follow wide oscillations during a year due to variations in both internal and external emergy contributions. Among the fluxes considered, those due to the introduction of fingerlings represented the highest contributions to the total emergy budget. Thus, to improve the sustainability of the analyzed system the amount, frequency and timing of these fluxes must be carefully considered. For this purpose, a comparison between two different fry introduction schedules was performed to evaluate differences in the efficiency of the rearing process.     

GC-MS analyses and chemometric processing to discriminate the local and long-distance sources of PAHs associated to atmospheric PM2.5

Purpose

This study presents a procedure to differentiate the local and remote sources of particulate-bound polycyclic aromatic hydrocarbons (PAHs).

Methods

Data were collected during an extended PM_2.5 sampling campaign (2009?C2010) carried out for 1?year in Venice-Mestre, Italy, at three stations with different emissive scenarios: urban, industrial, and semirural background. Diagnostic ratios and factor analysis were initially applied to point out the most probable sources. In a second step, the areal distribution of the identified sources was studied by applying the discriminant analysis on factor scores. Third, samples collected in days with similar atmospheric circulation patterns were grouped using a cluster analysis on wind data. Local contributions to PM_2.5 and PAHs were then assessed by interpreting cluster results with chemical data.

Results

Results evidenced that significantly lower levels of PM_2.5 and PAHs were found when faster winds changed air masses, whereas in presence of scarce ventilation, locally emitted pollutants were trapped and concentrations increased. This way, an estimation of pollutant loads due to local sources can be derived from data collected in days with similar wind patterns. Long-range contributions were detected by a cluster analysis on the air mass back-trajectories. Results revealed that PM_2.5 concentrations were relatively high when air masses had passed over the Po Valley. However, external sources do not significantly contribute to the PAHs load.

Conclusions

The proposed procedure can be applied to other environments with minor modifications, and the obtained information can be useful to design local and national air pollution control strategies.     

Pictorial intervention in a pediatric hospital environment: Effects on parental affective perception of the unit

In recent decades, research on health care design and planning has highlighted the strong relationship between environmental characteristics and human health. According to a patient-centered model, the focus on the hospital environment is important in reducing the negative effects of hospitalization on the patient, especially in the case of children.     

Pesticides residues in the Prochilodus costatus (Valenciennes, 1850) fish caught in the São Francisco River,Brazil

The objective of this study was to determine the levels of pesticides in the fish Prochilodus costatus caught in São Francisco River, one of most important rivers in Brazil. Thirty-six fish were captured in three different areas, and samples of the dorsal muscle and pooled viscera were collected for toxicological analysis. We evaluated the presence of 150 different classes of insecticides, fungicides, herbicides and acaricides by multiresidue analysis technique using liquid chromatography-tandem mass spectrometry (LC-MS/MS), with the limit of detection of 5 ppb. In this study, organophosphorus and carbamate pesticides were detected at the highest levels in the caught fish. Among the 41 organophosphorus pesticides surveyed, nine types were detected (chlorpyrifos, diazinon, dichlorvos, disulfoton, ethion, etrimfos, phosalone, phosmet and pyrazophos) in the muscle, viscera pool, or both in 22 (61.1%) fish. Sampled tissues of 20 (55.6%) fish exhibited at least one of the eight evaluated carbamate pesticides and their metabolites: aldicarb, aldicarb sulfoxide, carbaryl, carbofuran, carbosulfan, furathiocarb, methomyl and propoxur. Fungicides (carbendazim, benalaxyl, kresoxim-methyl, trifloxystrobin, pyraclostrobin and its metabolite BF 500 pyraclostrobin), herbicides (pyridate and fluasifop p-butyl), acaricide (propargite) and pyrethroid (flumethrin) were also detected. In conclusion, P. costatus fish caught in the São Francisco River contained residues of 17 different pesticides, in both muscles and the viscera pool, indicating heavy environmental contamination by pesticides in the study area.     

Determination of 5-ethylidene-2-norbornene in industrial emission

A method to measure the emissive concentration of 5-ethylidene-2-norbornene (ENB), a reactive compound used in industrial synthesis of terpolymers, has been developed. The starting points for the development of the presented method are European and Italian reference methods for the quantification of nonreactive volatile organic compounds in industrial emission. In this study, sampling conditions and desorption solvent have been optimized in laboratory and the method was applied in an industrial plant. The laboratory tests showed a good recovery (88–95 %). The concentrations of ENB in industrial emission obtained with the developed method were compared with an online gas chromatography–flame ionization results (R ²?>?0.97). In addition, several manual measurements were performed in parallel, and the resulting %RSD repeatability was <9 %. The developed method provides a discontinuous technique to measure reactive volatile organic compounds using easy-to-use instruments and assures a very good accuracy and precision even with high-humidity gas flows. The method could be extended to other reactive compounds of the same class.