A Pathological Late Pleistocene canid from San Sidero (Italy): implications for social- and feeding-behaviour

Evidence of diseases on vertebrate fossil bones can provide detailed information on many aspects of extinct animals. This study focused on pathological craniodental remains (left maxilla and dentary) referred to the canid Cuon alpinus unearthed from a Late Pleistocene karst filling deposit at San Sidero (Apulia, southern Italy). These fossils show clear evidence of a chronic periodontitis that caused the animal’s death. Clinical diagnosis of the disease and the timing of its development have been defined on the basis of a veterinary odontostomatology approach, in addition to radiographic and tomographic techniques. From the initiation of the infection until death, a time span of at least 6 months occurred, and three main steps have been defined: (1) the bacterial infections of the buccal cavity turning into severe periodontitis, (2) the fracture of the lower carnassial and (3) the loss of teeth due to the worsening infection that deformed and/or eroded maxillary and mandibular bones and enlarged alveoli. The analysis of the palaeopathology also provides information about the biomechanics of the bite, on the feeding behaviour and on the relationships of injured members in a pack of Late Pleistocene canids.     

Assessment of nitrous oxide emission from cement plants: Real data measured with both Fourier transform infrared and nondispersive infrared techniques

Nitrous oxide (N₂O) is the third most important greenhouse gas after carbon dioxide and methane, and contributes about 6% to the greenhouse effect. Nitrous oxide is a minor component of the atmosphere, and it is a thousand times less than carbon dioxide (CO₂). Nevertheless, it is much more potent than CO₂ and methane, owing to its long stay in the atmosphere of approximately 120 yr and the high global warming potential (GWP) of 298 times that of CO₂. Although greenhouse gases are natural in the atmosphere, human activities have changed the atmospheric concentrations. Most of the values of emission of nitrous oxide are still obtained by means of emission factors and not actually measured; the lack of real data may result in an underestimation of current emissions. The emission factors used for the calculation of N₂O can be obtained from the “Guidelines for the implementation of the national inventory of emissions” of the Intergovernmental Panel on Climate Change, which refer to all nations for the realization of their inventory. This study will present real data, measured in several Italian cement plants with different characteristics. The work also shows a comparison between N₂O concentration measured with in situ Fourier transform IR (FTIR) and the reference method EN ISO 21258 based on nondispersive IR (NDIR), in order to investigate the interfering compounds in the measurement with NDIR.

Implications:N₂O may arise as an unwanted by-product of nitrogen oxide (NO_x) abatement systems, in particular selective noncatalytic reduction (SNCR). Since it is applied in the cement plants, N₂O emission from cement industry is evaluated, with both FTIR and NDIR instrument. Several considerations emerged from the results. First of all, the emission from this industrial sector is not negligible, and for that reason N₂O concentration should be regulated; another observation is that the reference method based on the NDIR technique is not as selective as FTIR could be.     

Predicting dioxin-like PCBs soil contamination levels using milk of grazing animal as indicator

Dioxin-like PCBs (dl-PCBs) are ubiquitous persistent organic pollutants of recognized negative effects on human health. Assessing highly polluted areas should be an important public health issue. This study proposes to use the milk of grazing animals as a bioindicator of dl-PCB contamination in the environment. The hypothesis is that milk concentration of dl-PCBs are related to soil concentrations of these compounds, and that soils are generally reflective of a larger environmental issue of dl-PCB contamination. In this study, we evaluate the possibility of predicting soil concentrations using milk of sheep, cows and buffalos in a spatial model. For this purpose, samples of soil and milk collected in Campania (Italy) were introduced in a GIS platform to perform geostatistical analysis for building a simple predictive model. The ordinary least squares regressions (OLS) showed a statistically significant correlation (p < 0.05) between soil and milk contamination. However, this relationship was spatially variable. Thus, a geographically weighted regression (GWR) was performed, obtaining R² values of 0.91, 0.77 and 0.66 for sheep’s, buffalo’s and cow’s milk respectively. Assessed the mathematical relationships between the variables, new data was introduced to evaluate the performance of the model. Predictions of soil contamination with dl-PCBs using sheep’s, cow’s and buffalo’s milk showed a mean error of 23%, 25% and 36% respectively. According to these results the sheep’s milk can be considered the best bioindicator of dl-PCBs contamination among the three species. The results of this project evidence the potentialities of the proposed approach to assess bioindicator performance in a spatial predictive model.     

Occupational exposure to formaldehyde in an institute of morphology in Brazil: a comparison of area and personal sampling

Background, aims, and scope

Formaldehyde (FA) is a harmful chemical, which is classified as carcinogenic to humans (Group 1) by the International Agency for Research on Cancer. Solutions of FA that are used to preserve cadavers in research and education morphological institutes represent a risk to occupational health of professionals and students. During the dissection of cadavers in the anatomy laboratories, FA vapors are emitted, resulting in the exposure of students and their instructors to elevated levels of FA. The World Health Organization recommends an air quality guideline value of 0.1 mg m^?3 for exposure to FA. The limit of occupational exposure adopted by the Brazilian legislation (2.3 mg m^?3) is markedly higher than those adopted by institutions of other countries around the world. The purpose of this study was to determine the levels of personal exposure and the area concentration of FA in the morphology department of the Federal Fluminense University, Brazil, and investigate and compare the relationship between them.

Methods

Four rooms distributed in the three floors of the Morphology Department were evaluated: the embalming laboratory, the anatomy laboratories, the corridor of the teachers?? rooms, and the entrance hall. Thirty-six samples in total were collected in the second semester of 2010 and first semester of 2011. The air sampling and FA analysis were performed according to the EPA TO-11A Protocol, using a diffusive sampling device for carbonyl compounds. Personal samples were collected from monitors using a sampling device pinned on each person??s lapel. The samples were analyzed using rapid resolution liquid chromatography with UV-DAD detection at 360 nm.

Results and discussion

The concentrations of FA ranged from 0.20 and 0.18 mg m^?3 in the corridor between the teachers?? rooms, 0.03 to 0.37 mg m^?3 in the entrance hall, 0.22 to 2.07 mg m^?3 in the anatomy laboratory, 2.21 to 2.52 mg m^?3, in the embalming room. The levels found in the corridor between the teachers?? rooms and in the entrance hall were lower than in other compartments because of their large distances to the sources of FA and better ventilation. The other rooms presented higher levels of FA because of the activities carried there (embalming and dissection procedures). Even in the rooms that showed the lowest levels of FA, the values found were higher than those established by all international guideline limits, except the Brazilian legislation limit, although, the concentration level in the embalming room was even greater than the Brazilian guideline. These concentrations are 100?C1,000-fold higher than those reported in an FA outdoor study. The exposure levels of monitors and students ranged from 1.89 to 4.82 mg m^?3, indicating that current practices at the Morphology Department at the university would represent a health risk. The simultaneous monitoring of area concentrations and personal exposure showed that the characteristics of classes and of cadavers?? parts, the number of students in the room and even the activities of the monitors influence the FA concentrations.

Conclusion

This study revealed that the concentration of FA was low in the ventilated areas of the Morphology Department, and that the personal exposure when the person was close to the cadavers during the dissection procedure was higher than the mean FA concentration. This should be considered in the risk assessment of FA during these activities without effective protection equipment. It is suggested that the Brazilian legislation of exposure to formaldehyde requires an urgent update considering international legislation.     

Postconsumer polyethylene terephthalate (PET)/polyolefin blends through reactive processing

Increasing awareness of environmental and energy problems has promoted greater governmental interest in selected waste collection and consequently has attracted the interest of several research groups to the challenge of converting recovered plastics into useful materials. The reactive blending of postconsumer polyethylene terephthalate (PET) with different polyolefins (PO) was studied in attempts to obtain a new material with enhanced properties with respect to the starting materials. The success of the project depends mainly on the possibility of obtaining a compatibilized blend between two starting polymers that, from chemical and thermomechanical viewpoints, are very different. This was approached by employing polyolefins bearing functional groups capable of specific interaction or chemical reaction with PET end groups. Ternary blends of very low density polyethylene (VLDPE)/PET/functionalized polyolefin (FPO) in a weight composition of 70/20/10 and binary blends of FPO/PET in a weight composition of 90/10 were prepared and studied to obtain reinforced polyolefin thermoplastic materials. Reactive blending was achieved in a Brabender Plastograph with a mixing chamber of 30 or 50cm³, at 250°C, and 40rpm for 10min. Differential scanning calorimetry, scanning electron microscopy, and tensile tests were used to investigate the phase behavior, the efficiency of compatibilization, and the mechanical properties of the blends.     

Concentrations of trace elements in tissues of loggerhead turtles (Caretta caretta) from the Tyrrhenian and the Ionian coastlines (Calabria,Italy)

Environmental Science and Pollution Research - Toxic trace elements from both, natural and anthropogenic origin, pose a threat to aquatic environments and marine wildlife due to their long-range...     

Estimating the magnitude of morphoscapes: how to measure the morphological component of biodiversity in relation to habitats using geometric morphometrics

Ecological indicators are currently developed to account for the different facets of loss of biological diversity due to direct or indirect effects of human activities. Most ecological indicators include species richness as a metric. Others, such as functional traits and phylogenetic diversity, account for differences in species, even when species richness is the same. Here, we describe and apply a different indicator, called morphoscape dimension, accounting for morphological variability across habitats in a geographical region. We use the case of ground beetles (Coleoptera: Carabidae) in four different habitats in the Po Plain in Northern Italy to exemplify how to quantify the magnitude of the morphological space (i.e. the dimension of the morphoscape) occupied by the species in each habitat using geometric morphometrics. To this aim, we employed a variety of metrics of morphological disparity related to univariate size, and more complex multivariate shape and form. Our ‘proof of concept’ suggests that metrics assessing size and form might largely tend to simply mirror the information provided by species richness, whereas shape morphoscape disparity may be able to account for non-trivial differences in species traits amongst habitats. This is indicated by the woodland morphoscape being on average bigger than that of crops, the most species-rich habitat, despite having almost 20% less species. We conclude suggesting that the analysis of morphoscape dimension has the potential to become a new additional and complimentary tool in the hands of conservation biologists and ecologists to explore and quantify habitat complexity and inform decisions on management and conservation based on a wide set of ecological indicators.     

Polychlorinated biphenyls in two salt marsh sediments of the Venice Lagoon

Polychlorinated biphenyls (PCBs) were measured in two dated salt marsh cores of the Venice Lagoon to assess their input chronology and to evaluate the importance of atmospheric deposition as a source. Sampling sites were chosen in order to evidence the differences between areas located leeward and windward with respect to inputs originating in both the city of Venice and the industrial area. Concentrations of PCB indicators (0.13-15.6 ng g?1) increased gradually from the 1930s, reached maxima from the 1950s to the late 1970s, and then decreased. PCB loadings to marshes are driven by both the atmospheric deposition and the resuspension of subtidal sediments, this latter being more important for heavier congeners. The downwind marsh recorded higher fluxes (0.06-9.72 ng cm?2 year?1) than the upwind one (0.01-0.53 ng cm?2 year?1). Recent fluxes are rather consistent with bulk deposition measurements. A higher contribution of CB-101 and CB-118 was detected in the intermediate layers of the downwind site, suggesting a different PCB source for the corresponding time interval. In the other marsh, PCBs showed a rather constant composition at all levels (mostly CB-153, CB-138 and CB-180), accounting for a regional influence. Deep layers showed an enrichment of higher chlorinated congeners at both sites, whereas recent samples conserve the patterns typical of surficial and subsurficial subtidal sediments. The scientific approach adopted in this research can be considered as a sort of methodological procedure for the determination of fluxes and pathways of PCBs through the study of marsh cores.     

Lichen transplants as a suitable tool to identify mercury pollution from waste incinerators: a case study from NE Italy

A lichen transplant study aimed at investigating a strong increase in mercury concentrations in lichens was run in a territory of NE Italy where background values were very low only 8 years before. Thalli of the lichen Pseudevernia furfuracea collected in a pristine area were exposed for 1.5, 3 and 6 months at 31 sites selected according to the observed pattern of Hg concentrations, location of the suspected source (a new waste incinerator) and prevailing wind direction. Hg strongly increased at eight sites after 1.5 months, at 12 after 3 months and at 20 after 6 months. The highest values were always located SW and S of the incinerator, in good agreement with the prevailing night wind direction. It was concluded that, although the immediate risk for the population living close to the incinerator is low, long-term hazard due to Hg accumulation in the surrounding environment should be seriously taken into account.     

Sediment organic matter and meiofauna community response to long-term fish-farm impact in the Ligurian Sea (Western Mediterranean)

Quantitative and qualitative changes in meiofauna community structure were investigated to assess the impact of a fish farm, which was operating continuously for 15 years (La Spezia Gulf, W Mediterranean). Sediment samples were collected in June, July, September, October 2000 and February 2001 for the analysis of phytopigments (chlorophyll-a and phaeopigments), the biochemical composition of organic matter (proteins, carbohydrates and lipids) and related to meiofaunal parameters.

Sediment organic matter reached extremely high concentrations beneath the fish cages when compared to the control. Particularly lipids, carbohydrates and chlorophyll-a were significantly higher in fish-farm sediments. On a long-term basis meiofauna displayed adaptations in sediments beneath the cages resulting in an increase of density. Organic impact on meiofaunal community structure was evident in terms of an increase of the nematodes to copepods (Ne/Co) and nauplius to copepods (Na/Co) ratios in fish farm sediments. Cumaceans and kinorhynchs were encountered in control sediments, but disappeared in fish-farm samples. These data suggest that meiofauna is a sensitive tool for evaluating the effects of organic enrichment in fish farm impacted areas.