Simultaneous radioassays of bacterial production and mercury methylation in the periphyton of a tropical and a temperate wetland

Laboratory radioassays were made to study mercury (Hg) methylation together with bacterial production in the periphyton of two aquatic macrophytes, the submerged Myriophyllum spicatum, from a constructed wetland in Sweden and the floating Eichhornia crassipes, from a eutrophied tropical lake in Brazil. Time course incubations were made by addition of (203)HgCl(2) and the methylmercury formed was extracted at pre-defined time intervals. Bacterial production ((14)C-leucine incorporation) was measured at the same time intervals, with plants removed from parallel incubations made with and without addition of cold HgCl(2). For E. crassipes, higher methylmercury production was observed at elevated bacterial production, whereas for M. spicatum, the bacterial production was significantly lower, and Hg methylation was below the detection limit. The combined results confirm the importance of microbial processes for Hg methylation, although other factors are known to influence this process in complex ways. The addition of Hg did not significantly influence bacterial production, while the incubation temperatures used (25 and 35 degrees C) resulted in different methylation rates. Radiotracer techniques for measurements of bacterial production such as (14)C-leucine uptake can provide useful insights into the Hg cycle in aquatic environments, and our data suggest that they may be used as a proxy of mercury methylation potentials.     

GC-MS analyses and chemometric processing to discriminate the local and long-distance sources of PAHs associated to atmospheric PM2.5

Purpose

This study presents a procedure to differentiate the local and remote sources of particulate-bound polycyclic aromatic hydrocarbons (PAHs).

Methods

Data were collected during an extended PM_2.5 sampling campaign (2009?C2010) carried out for 1?year in Venice-Mestre, Italy, at three stations with different emissive scenarios: urban, industrial, and semirural background. Diagnostic ratios and factor analysis were initially applied to point out the most probable sources. In a second step, the areal distribution of the identified sources was studied by applying the discriminant analysis on factor scores. Third, samples collected in days with similar atmospheric circulation patterns were grouped using a cluster analysis on wind data. Local contributions to PM_2.5 and PAHs were then assessed by interpreting cluster results with chemical data.

Results

Results evidenced that significantly lower levels of PM_2.5 and PAHs were found when faster winds changed air masses, whereas in presence of scarce ventilation, locally emitted pollutants were trapped and concentrations increased. This way, an estimation of pollutant loads due to local sources can be derived from data collected in days with similar wind patterns. Long-range contributions were detected by a cluster analysis on the air mass back-trajectories. Results revealed that PM_2.5 concentrations were relatively high when air masses had passed over the Po Valley. However, external sources do not significantly contribute to the PAHs load.

Conclusions

The proposed procedure can be applied to other environments with minor modifications, and the obtained information can be useful to design local and national air pollution control strategies.     

Pictorial intervention in a pediatric hospital environment: Effects on parental affective perception of the unit

In recent decades, research on health care design and planning has highlighted the strong relationship between environmental characteristics and human health. According to a patient-centered model, the focus on the hospital environment is important in reducing the negative effects of hospitalization on the patient, especially in the case of children.     

Determination of 5-ethylidene-2-norbornene in industrial emission

A method to measure the emissive concentration of 5-ethylidene-2-norbornene (ENB), a reactive compound used in industrial synthesis of terpolymers, has been developed. The starting points for the development of the presented method are European and Italian reference methods for the quantification of nonreactive volatile organic compounds in industrial emission. In this study, sampling conditions and desorption solvent have been optimized in laboratory and the method was applied in an industrial plant. The laboratory tests showed a good recovery (88–95 %). The concentrations of ENB in industrial emission obtained with the developed method were compared with an online gas chromatography–flame ionization results (R ²?>?0.97). In addition, several manual measurements were performed in parallel, and the resulting %RSD repeatability was <9 %. The developed method provides a discontinuous technique to measure reactive volatile organic compounds using easy-to-use instruments and assures a very good accuracy and precision even with high-humidity gas flows. The method could be extended to other reactive compounds of the same class.     

Electrochemical oxidation of benzene on boron-doped diamond electrodes

This work presents an electrochemical investigation of the benzene oxidation process in aqueous solution on boron-doped diamond (BDD) electrodes. Additionally, in order to determine the main products generated during the oxidation process, electrolysis and high performance liquid chromatography experiments were carried out. The complete degradation of this compound was performed aiming to a further application in waste water treatment. The cyclic voltammetry studies indicate that benzene is irreversibly oxidized in acid medium (H₂SO₄ 0.5 M) on the BDD electrode surface at 2.0 V versus Ag/AgCl in a diffusion controlled process. During the cycling, other products are generated, and a pair of peaks was observed that can be associated with the oxi-reduction of anyone of the following species: hydroquinone, benzoquinone, resorcinol or catechol. The electrolysis experiments were carried out at 2.4 and 2.5 V on the BDD electrode surface in a solution containing 1 × 10⁻² M of benzene (below the saturation concentration in aqueous solution), for 3 and 5 h, respectively. The main products measured were: hydroquinone, resorcinol, p-benzoquinone, catechol and phenol. The complete electrochemical benzene degradation was performed in the electrolysis experiments using a rotating BDD disc electrode (2.5 V for 5 h) and the main products detected were all measured at concentrations lower than 10⁻⁵ M in this condition. The boron-doped diamond electrode had proved to be a valuable tool for the electrochemical degradation of the benzene, a very stable chemical compound.     

Habitat Mosaic, Wildlife Availability, and Hunting in the Tropical Forest of Calakmul, Mexico

Abstract: Habitat loss and subsistence hunting are two of the main activities that affect wildlife in frontier areas. We compared subsistence hunting patterns in four villages with different ethnic composition and degree of habitat disturbance in the vicinity of Calakmul Biosphere Reserve, Campeche, Mexico. We also compared differences between some of these villages in harvest composition and prey availability to determine hunting preferences. We used a Landsat TM satellite image to analyze the degree of disturbance around the villages. We conducted periodic surveys of subsistence hunting and prey availability. Wildlife availability was assessed monthly on nine transects (3000 m) established in the vicinity of three villages. The relative amount of disturbed habitat was smaller in an indigenous Maya village ( IV ) and larger in a mestizo village ( MV ). The two mixed-composition villages ( MCVs) had intermediate levels of disturbance. Ten species, four large and six small, of birds and mammals accounted for 97% of the hunting records. Hunting was more intense in IV and less intense in MCV1. The three village types had different hunting preferences. The habitat-mosaic composition in the vicinity of the villages influenced prey availability and subsistence-hunting preferences. Changes in the habitat mosaic were caused by the size of the holding and by ethnic composition. In spite of longer settlement time, the habitat mosaic in the vicinity of IV was less transformed than that of the other sites. Their larger holding size and greater diversity of economic activities may explain why the Mayas at IV have transformed the landscape less than the other groups and can hunt more and larger prey.     

Landscape-scale spatial distribution of the Lanner Falcon (Falco biarmicus feldeggii) breeding population in Italy

Falco biarmicus feldeggii is one of the most threatened taxa in Europe. Its global population is estimated at a few hundred pairs unequally scattered in a vast and fragmented area stretching from Sicily to the Caspian Sea. Most recent counts showed that Italy hosts a large part (>25%) of the whole population. Consequently, Italian authorities promoted a national action plan. In this framework, we carried out the first national survey for the Lanner Falcon in Italy (2003-2004). Our study area covered the whole breeding range, i.e., Sicily and the Italian peninsula (n = 2909 cells 10 x 10 km). When possible, we considered also additional information from previous regional investigations (1993-2001). First, we estimated size and distribution of each breeding subpopulation. Then, we tried to identify, at landscape level, the main environmental features linked to the spatial distribution of the nesting sites. We found the Lanner Falcon in 184 cells (6.4% of the total grid map), but we estimated no more than 140-172 pairs (70-80 of which are in Sicily) in the same breeding season. Higher levels of isolation characterize the continental breeding cells whereas in Sicily cells are much more clustered. Altitude is the main factor influencing cell aggregations in Italy; nevertheless, other environmental variables, such as climate, precipitation, and vegetation may be important. Our results show that the conservation measures adopted in Italy are somewhat inadequate given the low number of breeding pairs included in protected areas (23%-28%). Many small and scattered special areas of conservation (SAC) devoted to conserve priority habitats fit the irregular spatial aggregations of Lanner Falcon sites better than several large special protection areas (SPA).     

Development of a new automated clean-up system for the simultaneous analysis of polychlorinated dibenzo-p-dioxins (PCDDs), dibenzofurans (PCDFs) and 'dioxin-like' polychlorinated biphenyls (dl-PCB) in flue gas emissions by GPC-SPE

A comprehensive clean-up method for quantitative analysis of polychlorinated biphenyls (PCBs) and polychlorinated dibenzo-p-dioxins and dibenzo-furans (PCDD/Fs) in one single extract of environmental samples was developed. Since the chemical nature and toxicity of planar PCBs are similar to those of PCDD/Fs, dioxin-like PCBs and PCDD/Fs are often surveyed together in their exposure assessments. The development of a method for the simultaneous analysis of PCBs and PCDD/Fs in environmental samples is invaluable. The automated clean-up system evaluated in this work consists of three additional steps after traditional extraction: the chromatography on gel permeation (GPC), the concentration of the solvent through the use of an in-line evaporation module and the further purification and separation of PCDDs/Fs and dl-PCBs on an alumina cartridge in the 'SPE module'. In this work, three fly ash samples from an interlaboratory study with different PCDD/F and PCB levels were Soxhlet-extracted and then cleaned up using an automated system. PCDD/Fs and PCBs were determined using isotope dilution and high resolution gas chromatography/high resolution mass spectrometry. The determined values of 17 PCDD/Fs were consistent with the certified values and the relative standard deviations (RSDs) of the determined values were less than 20%. The recoveries of (13)C labeled PCDD/Fs and planar PCBs, and their RSDs were within the ranges specified in EPA1613 and 1668a methods, respectively. An accurate and reliable method was successfully developed and can be used in the simultaneous analysis of PCDD/Fs and planar PCBs in environmental samples.     

Concentration of Cd, Cu, Pb, Zn, Al, and Fe in soils of Manresa, NE Spain

The aims of this study were to determine the contents of cadmium (Cd), copper (Cu), lead (Pb), zinc (Zn), aluminium (Al), and iron (Fe) (aqua regia-extractable) in 27 soil plots (54 samples) from Manresa, NE Spain, and to establish relationships between heavy metals and some soil properties. The main soil types were surveyed and the median concentrations (mg kg(-1)) obtained were Cd 0.28, Cu 20.3, Pb 18.6, Zn 67.4, Al 22,572, and Fe 21,551. Element concentrations for these soils were lower than the published values for the Valencia region (Spain) and Torrelles and Sant Climent municipal districts (Catalonia, Spain). In terms of soil properties, the results of this study suggest that, in Manresa soils, both trace element adsorption and retention are influenced by several properties such as clay minerals, carbonates, organic matter, and pH. All element contents were positively correlated with clay content. Pb and Zn were negatively correlated with pH and CaCO(3).     

Characterisation of sulphide-bearing waste-rock dumps using electrical resistivity imaging: the case study of the Rio Marina mining district (Elba Island, Italy)

Sulphide-bearing mine dumps are potential sources of pollution when acid mine drainage (AMD) occurs. Because the generation of AMD depends on the volume and composition of waste materials, their characterisation is crucial for the evaluation of geochemical hazards and for the design of remediation strategies to minimise their environmental impact. In this paper, a cost-effective strategy for the characterisation of an inactive mine dump in the Rio Marina mining district (Elba Island, Italy) using earth resistivity imaging (ERI) is presented. As no information regarding the nature of waste rocks is found in reports for the mine, five ERI profiles were acquired at the top of the waste pile. The results show that waste rocks are heterogeneous with a maximum thickness of 30 m. Due to the large amounts of dispersed sulphide minerals, the waste rocks are characterised by an electrically conductive geophysical signature in comparison to the surrounding resistive metamorphic bedrock. A geostatistical approach was adopted to estimate the elevation of the edges of the mine dump, and the net volume of the waste rocks was computed through a raster analysis of the elevations of the upper and lower boundaries of the mine dump. High-conductivity anomalies were detected within the core of the mine dump. The integration of the hydrogeological, geochemical and geological framework of the Rio Marina mining district suggests that these anomalies could be a geophysical signature of subsurface regions where AMD is currently generated or stored, thus representing sources of environmental pollution.