Transport and dispersion during wintertime particulate matter episodes in the San Joaquin Valley, California

Data analysis and modeling were performed to characterize the spatial and temporal variability of wintertime transport and dispersion processes and the impact of these processes on particulate matter (PM) concentrations in the California San Joaquin Valley (SJV). Radar wind profiler (RWP) and radio acoustic sounding system (RASS) data collected from 18 sites throughout Central California were used to estimate hourly mixing heights for a 3-month period and to create case studies of high-resolution diagnostic wind fields, which were used for trajectory and dispersion analyses. Data analyses show that PM episodes were characterized by an upper-level ridge of high pressure that generally produced light winds through the entire depth of the atmospheric boundary layer and low mixing heights compared with nonepisode days. Peak daytime mixing heights during episodes were -400 m above ground level (agl) compared with -800 m agl during nonepisodes. These episode/nonepisode differences were observed throughout the SJV. Dispersion modeling indicates that the range of influence of primary PM emitted in major population centers within the SJV ranged from -15 to 50 km. Trajectory analyses revealed that little intrabasin pollutant transport occurred among major population centers in the SJV; however, interbasin transport from the northern SJV and Sacramento regions into the San Francisco Bay Area (SFBA) was often observed. In addition, this analysis demonstrates the usefulness of integrating RWP/RASS measurements into data analyses and modeling to improve the understanding of meteorological processes that impact pollution, such as aloft transport and boundary layer evolution.     

A respirometric method to measure mineralization of polymeric materials in a matured compost environment

A respirometric method was developed to measure the mineralization of polymeric materials in a matured compost environment. For the purpose of evaluating the method, results obtained for the mineralization of glucose and cellulose are presented. The matured compost, in addition to supplied nutrients, micronutrients, and an inoculum, serves as the matrix which supports the microbial activity. Recovery of the substrate carbon in the form of carbon dioxide from the glucose and cellulose added to test vessels was 68 and 70%, respectively. A statistical evaluation of the results obtained on substrate mineralization was carried out and showed acceptable reproducibility between replicate test vessels and test runs. The testing protocol developed has the following important characteristics: (1) the test reactors are maintained at 53 °C at a high solids loading (60% moisture), which has certain characteristics that are similar to a thermophilic compost environment; (2) the test matrix providing microbial activity is derived from readily available organic materials to facilitate reproducibility of the method in different laboratories; (3) the equipment required to perform this test is relatively inexpensive; and (4) the information obtained on polymer mineralization is vital to the study and development of biodegradable polymeric materials.Guest Editor: Dr. Graham Swift, Rohm & Haas.     

Assessment of the Usefulness of Semipermeable Membrane Devices for Long-Term Watershed Monitoring in an Urban Slough System

Semipermeable membrane devices (SPMDs) were deployed at eight sites within the Buffalo Slough, near Portland, Oregon, to (1) measure the spatial and seasonal distribution of dissolved polycyclic aromatic hydrocarbon (PAH) and organochlorine (OC) compounds in the slough, (2) assess the usefulness of SPMDs as a tool for investigating and monitoring hydrophobic compounds throughout the Columbia Slough system, and (3) evaluate the utility of SPMDs as a tool for measuring the long-term effects of watershed improvement activities. Data from the SPMDs revealed clear spatial and seasonal differences in water quality within the slough and indicate that for hydrophobic compounds, this time-integrated passive-sampling technique is a useful tool for long-term watershed monitoring. In addition, the data suggest that a spiking rate of 2–5 μg/SPMD of permeability/performance reference compounds, including at least one compound that is not susceptible to photodegradation, may be optimum for the conditions encountered here.     

Estrogenicity of pyrethroid insecticide metabolites

There is concern that insecticides are able to mimic the action of 17beta-estradiol by interaction with the human estrogen receptor. Pyrethroids are commonly used insecticides and several have been assessed for potential endocrine disrupting activity by various methods. It has been noted that some metabolites of pyrethroids, in particular, permethrin and cypermethrin, have chemical structures that are more likely to interact with the cellular estrogen receptor than the parent pyrethroid. For this study permethrin and cypermethrin metabolites 3-(4-hydroxy-3-phenoxy)benzyl alcohol, 3-(4-hydroxy-3-phenoxy)benzoic acid, and N-3-(phenoxybenzoyl)glycine were synthesised, and together with the commercially available 3-phenoxybenzyl alcohol, 3-phenoxybenzaldehyde, and 3-phenoxybenzoic acid, were studied in a recombinant yeast assay expressing human estrogen receptors (YES). Three metabolites, 3-phenoxybenzyl alcohol, 3-(4-hydroxy-3-phenoxy)benzyl alcohol, and 3-phenoxybenzaldehyde, showed estrogenic activity of approximately 10(5) less than that of 17beta-estradiol. No activity was observed in the yeast assay for 3-phenoxybenzoic acid, 3-(4-hydroxy-3-phenoxy)benzoic acid, and N-3-(phenoxybenzoyl)glycine. The results from this study show that pyrethroid metabolites are capable of interacting with the human estrogen receptor, and so might present a risk to human health and environmental well being. The impact would be expected to be small, but still add to the overall environmental xenoestrogen load.     

Validity of police-reported alcohol involvement in fatal motor carrier crashes in the United States between 1982 and 2005

Objective

To examine the validity of police-reported alcohol data for drivers involved in fatal motor carrier crashes.

Material and Methods

We determined the availability of blood alcohol concentration (BAC) and police-reported alcohol data on 157,702 drivers involved in fatal motor carrier crashes between 1982 - 2005 using Fatality Analysis and Reporting System (FARS) data. Drivers were categorized as motor carrier drivers if they operated a vehicle with a gross vehicle weight rating of greater than 26,000 pounds. Otherwise, they were classified as non motor carrier drivers. The sensitivity and specificity of police-reported alcohol involvement were estimated for both driver types.

Results

Of the 157,702 drivers, 18% had no alcohol information, 15% had BAC results, 42% had police-reported alcohol data, and 25% had both. Alcohol information varied significantly by driver, crash, and vehicle characteristics. For example, motor carrier drivers were significantly more likely (51%) to have BAC testing results compared to non motor carrier drivers (31%) (p < 0.001). The sensitivity of police-reported alcohol involvement for a BAC level ≥ 0.08 was 83% (95% CI 79%, 86%) for motor carrier drivers and 90% (95% CI 89%, 90%) for non motor carrier drivers. The specificity rates were 96% (95% CI 95%, 96%) and 91% (95% CI 90%, 91%), respectively.

Conclusions

The sensitivity and specificity of police-reported alcohol involvement are reasonably high for drivers involved in fatal motor carrier crashes. Further research is needed to determine the extent to which the accuracy of police-reported alcohol involvement may be overestimated because of verification bias.

Impact on the Industry

Based on the results of this study, the federal government should continue to work with states to strengthen their strategies to increase chemical testing of all drivers involved in fatal crashes.     

A Method for Setting the Size of Plant Conservation Target Areas

Abstract: Realistic time frames in which management decisions are made often preclude the completion of the detailed analyses necessary for conservation planning. Under these circumstances, efficient alternatives may assist in approximating the results of more thorough studies that require extensive resources and time. We outline a set of concepts and formulas that may be used in lieu of detailed population viability analyses and habitat modeling exercises to estimate the protected areas required to provide desirable conservation outcomes for a suite of threatened plant species. We used expert judgment of parameters and assessment of a population size that results in a specified quasiextinction risk based on simple dynamic models. The area required to support a population of this size is adjusted to take into account deterministic and stochastic human influences, including small-scale disturbance, deterministic trends such as habitat loss, and changes in population density through processes such as predation and competition. We set targets for different disturbance regimes and geographic regions. We applied our methods to Banksia cuneata, Boronia keysii, and Parsonsia dorrigoensis, resulting in target areas for conservation of 1102, 733, and 1084 ha, respectively. These results provide guidance on target areas and priorities for conservation strategies.     

Investigation of hydrophobic contaminants in an urban slough system using passive sampling – insights from sampling rate calculations

Semipermeable membrane devices (SPMDs) were deployed in the Columbia Slough, near Portland, Oregon, on three separate occasions to measure the spatial and seasonal distribution of dissolved polycyclic aromatic hydrocarbons (PAHs) and organochlorine compounds (OCs) in the slough. Concentrations of PAHs and OCs in SPMDs showed spatial and seasonal differences among sites and indicated that unusually high flows in the spring of 2006 diluted the concentrations of many of the target contaminants. However, the same PAHs - pyrene, fluoranthene, and the alkylated homologues of phenanthrene, anthracene, and fluorene - and OCs - polychlorinated biphenyls, pentachloroanisole, chlorpyrifos, dieldrin, and the metabolites of dichlorodiphenyltrichloroethane (DDT) - predominated throughout the system during all three deployment periods. The data suggest that storm washoff may be a predominant source of PAHs in the slough but that OCs are ubiquitous, entering the slough by a variety of pathways. Comparison of SPMDs deployed on the stream bed with SPMDs deployed in the overlying water column suggests that even for the very hydrophobic compounds investigated, bed sediments may not be a predominant source in this system. Perdeuterated phenanthrene (phenanthrene-d (10)). spiked at a rate of 2 microg per SPMD, was shown to be a reliable performance reference compound (PRC) under the conditions of these deployments. Post-deployment concentrations of the PRC revealed differences in sampling conditions among sites and between seasons, but indicate that for SPMDs deployed throughout the main slough channel, differences in sampling rates were small enough to make site-to-site comparisons of SPMD concentrations straightforward.     

Wintertime Vertical Variations in Particulate Matter (PM) and Precursor Concentrations in the San Joaquin Valley during the California Regional Coarse PM/Fine PM Air Quality Study

Abstract

Air quality monitoring was conducted at a rural site with a tower in the middle of California’s San Joaquin Valley (SJV) and at elevated sites in the foothills and mountains surrounding the SJV for the California Regional PM₁₀/M_2.5 Air Quality Study. Measurements at the surface and on a tower at 90 m were collected in Angiola, CA, from ecember 2000 through February 2001 and included hourly black carbon (BC), particle counts from optical particle counters, nitric oxide, ozone, temperature, relative humidity, wind speed, and direction. Boundary site measurements were made primarily using 24-hr integrated particulate matter (PM) samples. These measurements were used to understand the vertical variations of PM and PM precursors, the effect of stratification in the winter on concentrations and chemistry aloft and at the surface, and the impact of aloft-versus-surface transport on PM concentrations. Vertical variations of concentrations differed among individual species. The stratification may be important to atmospheric chemistry processes, particularly nighttime nitrate formation aloft, because NO₂ appeared to be oxidized by ozone in the stratified aloft layer. Additionally, increases in accumulation-mode particle concentrations in the aloft layer during a fine PM (PM_2.5) episode corresponded with increases in aloft nitrate, demonstrating the likelihood of an aloft nighttime nitrate formation mechanism. Evidence of local transport at the surface and regional transport aloft was found; transport processes also varied among the species. The distribution of BC appeared to be regional, and BC was often uniformly mixed vertically. Overall, the combination of time-resolved tower and surface measurements provided important insight into PM stratification, formation, and transport.     

Predictability of clinical assessments for driving performance

PROBLEM: As the number of older drivers grows, it is increasingly important to accurately identify at-risk drivers. This study tested clinical assessments predictive of real-time driving performance. METHOD: Selected assessment tools considered important in the identification of at-risk older drivers represented the domains of vision, cognition, motor performance, and driving knowledge. Participants were administered the battery of assessments followed by an on-road test. A univariate analysis was conducted to identify significant factors (<.05) to be included in a multivariate regression model. RESULTS: Assessments identified as independently associated with driving performance in the regression model included: FACTTM Contrast sensitivity slide-B, Rapid Pace Walk, UFOV rating, and MMSE total score. DISCUSSION: The domains of vision, cognitive, and motor performance were represented in the predictive model. SUMMARY: Due to the dynamic nature of the driving task, it is not likely that a single assessment tool will identify at risk drivers. IMPACT ON INDUSTRY: By standardizing the selection of clinical assessments used in driving evaluations, practitioners should be able to provide services more efficiently, more objectively, and more accurately to identify at-risk drivers.     

The Effect of Nanoclays on the Properties of PLLA-modified Polymers Part 1: Mechanical and Thermal Properties

Organically modified montmorillonite clays were incorporated at a 5% loading level into film grade of poly-L-lactic acid (PLLA) using a variety of masterbatches based on either semi-crystalline or amorphous poly-(lactic acid), as well as biodegradable aromatic aliphatic polyester. The PLLA masterbatches and compounded formulations were prepared using a twin screw compounding extruder, while the films were prepared using a single screw cast film extruder. The thermal and mechanical properties of the films were examined in order to determine the effect of the clay and different carriers on the polymer–clay interactions. In the optimal case, when a PLLA-based masterbatch was used, the tensile modulus increased by 30%, elongation increased by 40%, and the cold crystallization temperature decreased by 15 °C, compared to neat PLLA. The properties improvement of PLLA films containing nano clays demonstrated the possibility to extend the range of biodegradable film applications, especially in the field of packaging.