Seasonal stresses shift optimal intertidal algal habitats

We studied how the growth, reproduction, and survival of a common intertidal rockweed (Fucus distichus) varied across its tidal elevation at 14 sites around San Juan Island, Washington, USA in spring–summer and fall-winter seasons. We also measured a suite of environmental factors including temperature, light, emersion time, slope, fetch, and herbivory. To interpret the response of Fucus we included measurements of phlorotannins and carbon storage compounds (mannitol, laminarin). Growth and reproduction exhibited parallel patterns across tidal zones and sites. Tidal zone was a significant source of variation for many Fucus response variables, whereas variation between sites was high but not generally a significant factor explaining Fucus growth and physiology. Unexpectedly, the tidal zone in which Fucus achieved its highest growth and reproduction switched between seasons. High zone thalli grew and reproduced better than Mid zone thalli in fall but not in spring. This result can be explained by different combinations of factors influencing Fucus in each season. In spring, longer emersion times due to daytime low tides resulted in lower growth rates higher on the shore, likely due to carbon limitation. In fall during nighttime low tides, emersion and carbon limitation stresses were minimal. Overall, fall growth was lower than spring growth, but low fall light was not responsible. Instead, warmer average fall temperatures in the High zone apparently favored growth and reproduction relative to the Mid zone. In contrast, Mid zone thalli were subjected to more intense herbivory and hydrodynamic stress associated with wave exposure and steep substrata during the fall. At least for some seaweeds, living in the presumably more stressful high zone can actually confer higher integrated performance.     

A comparison of disposal methods for on-site sewage facilities within the state of Texas,USA

Currently, 1.5 million homes in Texas, USA utilize an on-site sewage facility to manage their household waste. This study compares the conventional septic dispersal technology of perforated pipe drain field with two of the new technologies recently implemented in Texas, multi-pipe and chamber systems, determining if soil classification and climate are influencing factors in functional ability for each of the technologies. There is no statistical significance for failure of a system with respect to system type or climate zone. The textural classification of soil is a statistically significant variable in septic system failures. Soil type III, which includes the clay groups except pure clays and silty clay, appears to significantly influence system failures. Additionally, occupant misuse and lack of maintenance are contributing factors to system failure.     

Spatial and temporal variations and mobile source emissions of polycyclic aromatic hydrocarbons in Quito, Ecuador

Motor vehicles are a major source of air pollution in Quito, Ecuador; however, little work has been done to characterize spatial and temporal variations in traffic-related pollutants, or to measure pollutants in vehicle emissions. We measured PAH continuously for one year at two residential sites in Quito, and PAH and traffic patterns for one week near a busy roadway. Morning rush-hour traffic and temperature inversions caused daily PAH maxima between 06:00 and 08:00. SO₂, NO_x, CO, and PM_2.5 behaved similarly. At the residential sites PAH levels during inversions were 2-3-fold higher than during the afternoon, and 10-16-fold higher than 02:00-03:00 when levels were lowest. In contrast, at the near-roadway site, PAH concentrations were 3-6-fold higher than at the residential sites, and the effects of inversions were less pronounced. Cars and buses accounted for >95% of PAH at the near-roadway site. Near-roadway PAH concentrations were comparable to other polluted cities.     

Fungal spore fragmentation as a function of airflow rates and fungal generation methods

The aim of this study was to characterise and quantify the fungal fragment propagules derived and released from several fungal species (Penicillium, Aspergillus niger and Cladosporium cladosporioides) using different generation methods and different air velocities over the colonies. Real time fungal spore fragmentation was investigated using an Ultraviolet Aerodynamic Particle Sizer (UVASP) and a Scanning Mobility Particle Sizer (SMPS). The study showed that there were significant differences (p < 0.01) in the fragmentation percentage between different air velocities for the three generation methods, namely the direct, the fan and the fungal spore source strength tester (FSSST) methods. The percentage of fragmentation also proved to be dependent on fungal species. The study found that there was no fragmentation for any of the fungal species at an air velocity ≤0.4 m s^?1 for any method of generation. Fluorescent signals, as well as mathematical determination also showed that the fungal fragments were derived from spores. Correlation analysis showed that the number of released fragments measured by the UVAPS under controlled conditions can be predicted on the basis of the number of spores, for Penicillium and A. niger, but not for C. cladosporioides. The fluorescence percentage of fragment samples was found to be significantly different to that of non-fragment samples (p < 0.0001) and the fragment sample fluorescence was always less than that of the non-fragment samples. Size distribution and concentration of fungal fragment particles were investigated qualitatively and quantitatively, by both UVAPS and SMPS, and it was found that the UVAPS was more sensitive than the SMPS for measuring small sample concentrations, whilethe results obtained from the UVAPS and SMAS were not identical for the same samples.     

Mapping bundles of ecosystem services reveals distinct types of multifunctionality within a Swedish landscape

Ecosystem services (ES) is a valuable concept to be used in the planning and management of social–ecological landscapes. However, the understanding of the determinant factors affecting the interaction between services in the form of synergies or trade-offs is still limited. We assessed the production of 16 ES across 62 municipalities in the Norrström drainage basin in Sweden. We combined GIS data with publically available information for quantifying and mapping the distribution of services. Additionally, we calculated the diversity of ES for each municipality and used correlations and k-means clustering analyses to assess the existence of ES bundles. We found five distinct types of bundles of ES spatially agglomerated in the landscape that could be explained by regional social and ecological gradients. Human-dominated landscapes were highly multifunctional in our study area and urban densely populated areas were hotspots of cultural services.     

Hazardous Pollutants in Class II Landfills

Class II landfills accept nontoxic municipal trash. Their gaseous emissions were originally assumed to be relatively free of hazardous substances. However, one Class II site in Southern California was found to be emitting enough vinyl chloride to exceed the California Air Quality Standard of 10 ppb for a 24-hour average in surrounding neighborhood. This paper presents a summary of the results of the analysis of landfill gas from over 20 additional Class II landfills. Ambient air surveys were conducted around five of the landfills. About 90 percent of the landfills contained measurable amounts of vinyl chloride and/or benzene. The concentrations exceeded 1 ppm in about half of the sites studied. Vinyl chloride is produced in situ by the action of bacteria on chlorinated solvents, and can be found in landfills that have been closed for over 30 years. The relative amounts of methane and vinyl chloride vary so much within a single landfill that methane measurements cannot be used as a surrogate for vinyl chloride     

Determination of the emissions from an aircraft auxiliary power unit (APU) during the Alternative Aviation Fuel Experiment (AAFEX)

The emissions from a Garrett-AiResearch (now Honeywell) Model GTCP85–98CK auxiliary power unit (APU) were determined as part of the National Aeronautics and Space Administration's (NASA's) Alternative Aviation Fuel Experiment (AAFEX) using both JP-8 and a coal-derived Fischer Tropsch fuel (FT-2). Measurements were conducted by multiple research organizations for sulfur dioxide (SO₂), total hydrocarbons (THC), carbon monoxide (CO), carbon dioxide (CO₂), nitrogen oxides (NO_x), speciated gas-phase emissions, particulate matter (PM) mass and number, black carbon, and speciated PM. In addition, particle size distribution (PSD), number-based geometric mean particle diameter (GMD), and smoke number were also determined from the data collected. The results of the research showed PM mass emission indices (EIs) in the range of 20 to 700 mg/kg fuel and PM number EIs ranging from 0.5?×?10¹⁵ to 5?×?10¹⁵ particles/kg fuel depending on engine load and fuel type. In addition, significant reductions in both the SO₂ and PM EIs were observed for the use of the FT fuel. These reductions were on the order of ～90% for SO₂ and particle mass EIs and ～60% for the particle number EI, with similar decreases observed for black carbon. Also, the size of the particles generated by JP-8 combustion are noticeably larger than those emitted by the APU burning the FT fuel with the geometric mean diameters ranging from 20 to 50 nm depending on engine load and fuel type. Finally, both particle-bound sulfate and organics were reduced during FT-2 combustion. The PM sulfate was reduced by nearly 100% due to lack of sulfur in the fuel, with the PM organics reduced by a factor of ～5 as compared with JP-8.

Implications: The results of this research show that APUs can be, depending on the level of fuel usage, an important source of air pollutant emissions at major airports in urban areas. Substantial decreases in emissions can also be achieved through the use of Fischer Tropsch (FT) fuel. Based on these results, the use of FT fuel could be a viable future control strategy for both gas- and particle-phase air pollutants.     

Voluntary recycling despite disincentives

This paper assesses the determinants of take-up of a voluntary waste separation scheme, in a scenario where residents sorted, stored and paid for collection of recycling waste even though mixed waste was collected at the kerbside more conveniently, free of charge and without any quantity limits. Uptake of the scheme was positive, persistent and diverse across localities, offering an opportunity to assess the factors determining voluntary participation in the presence of disincentives. We employ a unique panel data-set (n = 4,644) from Malta, including data on recyclable waste kilogrammes collected over the first 86 weeks of the scheme's operation. Drawing on insights from environmental economics and psychology, a model is empirically estimated. Results indicate that uptake is suppressed by the initial constraints households may face and stimulated by collection frequency. Political vote is an important determinant of participation and this interacts with scheme promotion to create diverse uptake rates.     

Performance comparison of tin oxide anodes to commercially available dimensionally stable anodes

Dimensionally stable anodes (DSAs) demonstrate potential for the electrochemical treatment of industrial waste streams and disinfection of effluent. Oxidation by laboratory-prepared tin oxide DSAs was compared with that of commercially available ruthenium oxide, iridium oxide, and mixed metal oxide DSAs, using hexanol as a probe molecule. The performance of the four anodes was similar in two-chamber reactors, in which the anode cell was separated from the cathode cell by a Nafion membrane, which allows transmission of current between the chambers, but not passage of chemical constituents. The anodes were then evaluated in single-cell reactors, which are more representative of potential treatment and disinfection applications. However, in the single-cell reactors, the tin oxide anodes were significantly more effective at oxidation and generated higher quality cyclic voltammograms than the other DSAs. These results suggest that tin oxide anodes have greater potential than the three commercially available DSAs tested for industrial waste stream treatment and effluent disinfection.