Identification of heavy metal origins related to chemical and morphological soil properties using several non-destructive X-ray analytical methods

Soils are complex mixtures of organic, inorganic materials, and metal compounds from anthropogenic sources. In order to identify the pollution sources, their magnitude and development, several X-ray analytical methods were applied in this study. The concentrations of 16 elements were determined in all the soil samples using energy dispersive X-ray fluorescence spectrometry. Soils of unknown origin were observed by scanning electron microscopy equipped with a Si(Li) X-ray detector using Monte Carlo simulation approach. The mineralogical analyses were carried out using X-ray diffraction spectrometry. Due to the correlations between heavy metals and oxide compounds, the samples were analyzed also by electron probe microanalyzer (EPMA) in order to have information about their oxide contents. On the other hand, soil pH and salinity levels were identified owing to their influence between heavy metal and soil-surface chemistry. Moreover, the geoaccumulation index (I _geo) enables the assessment of contamination by comparing current and pre-industrial concentrations.     

Trace metal levels and some chemical parameters in herby cheese collected from south eastern Anatolia-Turkey

Due to the consumption of the herby cheese in south eastern Anatolia-Turkey is at high ratio, chemical parameters such as dry matter, pH, acidity, aCl, protein, fat and trace metal contents in 50 different herby cheeses produced at this region have been determined in the presented study. The content of lead, copper, cobalt, nickel, chromium, cadmium, and iron have been analyzed by flame atomic absorption spectrometer in air/acetylene flame after combination ash digestion method and wet digestion method. The mean concentration of lead, copper, cobalt, nickel, chromium and cadmium in our samples are higher than literature values except iron.     

Variation of heavy metal and micro and macro element concentrations of bread and durum wheats and their relationship in grain of Turkish wheat cultivars

The 64 varieties displayed a large variation for all mineral elements, investigated Fe, Mn and Zn, ranging from 24.2 to 43.1 mg/kg, 27.6 to 64.8 mg/kg and 10.4 to 38.2 mg/kg, respectively. The mean Ca, K, Mg, Na, P and S concentrations in wheat rain varieties amounted to 378, 4,266, 1,183, 317, 3,513 and 1,542 mg/kg, respectively. Ca, K, Mg, Na, P and S contents of wheat varieties changed at the levels between 266 and 531 mg/kg, 3,029 and 5,566 mg/kg, 972 and 1,525 mg/kg, 277 and 368 mg/kg, 2,422 and 4,610 mg/kg and 1,241 to 2,052 mg/kg, respectively. The concentrations of Al, Cu, Fe, Mn and Zn of durum wheat samples were found at high levels. The mean Al, Cr, Mo, Ni, Cu, Fe, Mn and Zn concentrations in durum wheat varieties amounted to 10.93, 0.47, 0.72, 0.72, 5.37, 34.9, 37.28 and 20.88 mg/kg, respectively.     

The fatty acid compositions of several plant seed oils belong to Leguminosae and Umbelliferae families

In samples with 1,009, 7,723, 7,618, 7,618, 1,004 and 1,009 number, oleic acid were found as 62.0, 77.0, 74.84, 71.55, 54.52 and 62.30 %, respectively. In other samples, oleic acid content was determined between 17.43 % (1,589) and 34.86 % (1,298). Linoleic acid content of seed oils ranged from 6.52 % (7,727) to 57.29 % (1,501). In addition, linolenic acid content was found between 0.22 % (7,618) and 46.91 % (1,589). Palmitic acid content of samples changed between 2.03 % (7,727) and 19.81 % (1,298). Capric acid was found at high level in 1,009 (8.53 %), 7,727 (37.31 %) and 1,004 (8.28 %) samples. Caproic acid was found in only 7,727 (3.38 %).     

Stochastic modeling of accident risks associated with an underground coal mine in Turkey

In this study, a methodology is proposed towards development of an uncertainty model that includes randomness in the occurrence of days-lost accidents in a coal mine. The accident/injury data consists of 1390 days-lost accident cases recorded at GLI-Tuncbilek underground lignite mine from January 1994 to December 2002. In the first step of proposed methodology, the frequency and the severity of the accidents have been modeled statistically by fitting appropriate distributions. The test done by BestFit software yields a chi-square value of 21.53 (p = 0.089) with 14 degrees of freedom and estimates the parameter of lambda for Poisson distribution as 12.87 accidents/month. For the severity component, a lognormal distribution is fitted to days-lost data and chi-square goodness-of-fit test calculates a value of 40.44 (p = 0.097) with 30 degrees of freedom. The parameters of lognormal distribution are estimated as a mean of 14.3 days and standard deviation of 23.1 days, respectively. Then, two distributions are basically combined by Monte Carlo simulation in order to construct relative risk levels in yearly base referring to the final cumulative distribution. Finally, a simple forecasting modeling is carried out in order to quantitatively predict the expected risk levels by using decomposition technique in time series analysis. Stochastic model estimates that although, there would be substantial reduction in the expected number of accidents in the near future, the higher level of risks still should be a concern for the mine management.     

Assessment of trace metal contamination in the sea cucumber (<Emphasis Type="Italic">Holothuria tubulosa</Emphasis>) and sediments from the Dardanelles Strait (Turkey)

This study was performed to determine the concentrations of some trace metals (Cd, Cu, Pb, Ni, Zn, and Fe) in Holothuria tubuosa (Gmelin, 1788) belonging to Echinoderm species and in sediments that they live at three different stations (Gelibolu, Umur Bey/Lapseki, and Dardanos) on Dardanelles Strait between April 2013 and March 2014. The mean trace metal concentrations determined in H. tubulosa and sediment were as follows: Cd 0.18 mg/kg, Cu 2.43 mg/kg, Pb 2.09 mg/kg, Ni 14.58 mg/kg, Zn 16.86 mg/kg, and Fe 73.46 mg/kg and Cd 0.70 mg/kg, Cu 5.03 mg/kg, Pb 14.57 mg/kg, Ni 27.15 mg/kg, Zn 54.52 mg/kg, and Fe 3779.9 mg/kg, respectively. It was detected that the statistical difference between trace metals determined seasonally in muscle tissue of H. tubulosa was significant (p?>?0.05). As a result of the study, it was detected that H. tubulosa is a bioindicator species in determining Ni trace metal in sediment. The results were compared to the limit values of National and International Food Safety, and it was detected that Cd and Ni concentrations measured in sediment were above LEL of Ni and Cd concentrations according to Sediment Quality Guidelines.     

Electro-Fenton degradation of the antibiotic sulfanilamide with Pt/carbon-felt and BDD/carbon-felt cells. Kinetics,reaction intermediates,and toxicity assessment

The degradation of 230 mL of a 0.6-mM sulfanilamide solution in 0.05 M Na₂SO₄ of pH 3.0 has been studied by electro-Fenton process. The electrolytic cell contained either a Pt or boron-doped diamond (BDD) anode and a carbon-felt cathode. Under these conditions, organics are oxidized by hydroxyl radicals formed at the anode surface from water oxidation and in the bulk from Fenton’s reaction between initially added (and then electrochemically regenerated) Fe²⁺ and cathodically generated H₂O₂. From the decay of sulfanilamide concentration determined by reversed-phase liquid chromatography, an optimum Fe²⁺ concentration of 0.20 mM in both cells was found. The drug disappeared more rapidly using BDD than Pt, and, in both cases, it was more quickly removed with raising applied current. Almost total mineralization was achieved using the BDD/carbon-felt cell, whereas the alternative use of Pt anode led to a slightly lower mineralization degree. In both cells, the degradation rate was accelerated at higher current but with the concomitant fall of mineralization current efficiency due to the greater increase in rate of the parasitic reactions of hydroxyl radicals. Reversed-phase liquid chromatography allowed the identification of catechol, resorcinol, hydroquinone, p-benzoquinone, and 1,2,4-trihydroxybenzene as aromatic intermediates, whereas ion exclusion chromatography revealed the formation of malic, maleic, fumaric, acetic, oxalic, formic, and oxamic acids. NH₄ ⁺, NO₃ ^?, and SO₄ ^2? ions were released during the electro-Fenton process. A plausible reaction sequence for sulfanilamide mineralization involving all detected intermediates has been proposed. The toxicity of the solution was assessed from the Vibrio fischeri bacteria luminescence inhibition. Although it acquired its maximum value at short electrolysis time, the solution was completely detoxified at the end of the electro-Fenton treatment, regardless of the anode used.     

Oxidation of artificial sweetener sucralose by advanced oxidation processes: a review

Sucralose, a chlorinated carbohydrate, has shown its increased use as an artificial sweetener and persistently exists in wastewater treatment plant effluents and aquatic environment. This paper aims to review possible degradation of sucralose and related carbohydrates by biological, electrochemical, chemical, and advanced oxidation processes. Biodegradation of sucralose in waterworks did not occur significantly. Electrochemical oxidation of carbohydrates may be applied to seek degradation of sucralose. The kinetics of the oxidation of sucralose and the related carbohydrates by different oxidative species is compared. Free chlorine, ozone, and ferrate did not show any potential to degrade sucralose in water. Advanced oxidation processes, generating highly strong oxidizing agent hydroxyl radicals (^?OH), have demonstrated effectiveness in transforming sucralose in water. The mechanism of oxidation of sucralose by ^?OH is briefly discussed.     

Seasonal variations of particle-associated nitrosamines by gas chromatography–mass spectrometry in the atmospheric environment of Zonguldak, Turkey

A gas chromatography–mass spectrometry method has been proposed for the determination of low-level mutagenic and carcinogenic nitrosamines in particulate matter. The method includes the collection of particulate matters (PM_2.5 and PM₁₀) using a dichotomous Partisol 2025 sampler and extraction of the compounds from aqueous solution with dichloromethane/2-propanol after sonication with a slightly basic water solution prior to their GC-MS analysis in electron impact mode. The obtained recoveries of nitrosamines ranged from 92.4 to 99.2 %, and the precision of this method, as indicated by the relative standard deviations, was within the range of 0.95–2.46?%. The detection limits obtained from calculations using the GC-MS results based on S/N?=?3 were found within the range from 4 to 22 pg/m³. The predominant nitrosamines determined in particulate matter were N-nitrosodimethylamine, N-nitrosodiethylamine, N-nitrosodibutylamine and N-nitrosomorpholine. Furthermore, N-mono- and dinitrosopiperazine and N-nitrosoethylbutylamine were also determined. N-dinitrosopiperazine was detected in PM_2.5 samples at the highest concentrations of up to 22.85 ng/m³ and in PM_2.5–10 samples at concentrations up to 7.60 ng/m³ in winter, whereas it was found in PM_2.5 samples up to 5.15 ng/m³ and in PM_2.5–10 samples up to 3.12 ng/m³ in summer. The total concentrations of nitrosamines were up to 161.4 ng/m³ in fine and 53.90 ng/m³ in coarse fractions in winter, whereas in summer were up to 35.24 and 12.60 ng/m³, respectively. The concentration levels of nitrosamines fluctuated significantly within a year, with higher means and peak concentrations in the winter compared to that in the summertime. The seasonal variations of particle-associated nitrosamine concentrations were investigated together with their relationships with meteorological parameters using Pearson’s correlation analysis in the winter and summer periods. Analysis of variance was used to determine which concentrations of nitrosamines were statistically different from one another and, together with meteorological parameters and discriminant analysis, was used to classify the particle samples by particle size according to seasons. The classification results of the particle samples in different seasons were very satisfactory, allowing 99.5 % of cases to be correctly grouped.     

Degradation of Acid Orange 7 by electrochemically generated (*)OH radicals in acidic aqueous medium using a boron-doped diamond or platinum anode: a mechanistic study

A comparative study of the degradation of Acid Orange 7 (AO 7) aqueous solutions in acidic medium of pH 3.0 by electro-Fenton process using Pt or boron-doped diamond (BDD) anode was reported. The oxidative degradation of AO 7 by electrochemically generated hydroxyl radicals follows a pseudo-first order kinetic with a similar rate constant with BDD or Pt anode. The absolute rate constant of the AO 7 hydroxylation reaction was determined as (1.10+/-0.04)x10(10)M(-1)s(-1) by using the competition kinetic method. The comparative study of TOC measurements during electro-Fenton treatment showed a higher mineralization rate with BDD than Pt anode at the first hours of electrolysis because of the higher oxidizing power of this anode. The electro-Fenton degradation of AO 7 was followed by monitoring the formation and evolution of aromatic intermediates which are oxidized to aliphatic carboxylic acids before mineralization (transformation to CO(2) and inorganic ions, i.e. sulphate, nitrate and ammonium). The follow-up of the solution toxicity evolution shows the formation of intermediates more toxic than AO 7 and the connection between toxicity and aromaticity. A mineralization reaction pathway of AO 7 by electro-Fenton degradation involving all the intermediates identified was proposed.