Disinfection of wastewater with peracetic acid: a review

Peracetic acid is a strong disinfectant with a wide spectrum of antimicrobial activity. Due to its bactericidal, virucidal, fungicidal, and sporicidal effectiveness as demonstrated in various industries, the use of peracetic acid as a disinfectant for wastewater effluents has been drawing more attention in recent years. The desirable attributes of peracetic acid for wastewater disinfection are the ease of implementing treatment (without the need for expensive capital investment), broad spectrum of activity even in the presence of heterogeneous organic matter, absence of persistent toxic or mutagenic residuals or by-products, no quenching requirement (i.e., no dechlorination), small dependence on pH, short contact time, and effectiveness for primary and secondary effluents.Major disadvantages associated with peracetic acid disinfection are the increases of organic content in the effluent due to acetic acid (AA) and thus in the potential microbial regrowth (acetic acid is already present in the mixture and is also formed after peracetic acid decomposition). Another drawback to the use of peracetic acid is its high cost, which is partly due to limited production capacity worldwide. However, if the demand for peracetic acid increases, especially from the wastewater industry, the future mass production capacity might also be increased, thus lowering the cost. In such a case, in addition to having environmental advantages, peracetic acid may also become cost-competitive with chlorine.     

Small‐Capacity Gold Production Tests From Waste Desktop Computers

This article describes a procedure for the hydrometallurgical recovery of gold from waste computer printed circuit boards (PCBs) and central processing units (CPUs). The wastes processed within the recovery installation described in this article were derived from desktop computers, the parts of which were manually sorted to select those components found to be rich in gold content. X‐ray fluorescence measurements showed that considerable amounts of gold are contained in the “finger” terminals of the PCBs as well as in the CPUs. This article describes the chemical processes for recovering gold from these parts. In addition, the article covers the emissions control apparatus that is capable of eliminating the nitrogen oxides (NOx) and sulfur dioxide (SO2) emissions produced by the recovery process. The main costs arising from the overall procedure are for personnel utilization. Approximately 60 work hours from one worker are required to process 1.75–1.85 tons of unprocessed desktop computer waste to produce gold in the form of sediments. The quantity of gold recovered from this amount of waste computers can reach up to 35 grams with a standardized purity of 21 karats. The overall recovery procedure takes eight consecutive calendar days to accomplish.     

Potential utilization of burned wood in manufacture of medium density fiberboard

The potential utilization of burned wood in the manufacture of medium density fiberboard (MDF) was investigated. For this aim, the MDF panels were made of various mixtures of burned pine wood (Pinus sylvestris L.), unburned beech (Fagus orientalis L.) and oak (Ouercus robur L.) woods under commercial conditions in an MDF company. The mixture ratio of the unburned beech and oak woods to the burned pine wood were 50/50 wt%. The mixing ratios of burned wood chips with unburned wood chips were 0:100, 25:75, 50:50, 75:25 and 100:0, %, respectively. A commercial urea–formaldehyde resin was used as a binder. The physical properties measured in the investigation included density and thickness swelling, while the mechanical properties examined were bending strength, modulus elasticity, internal bond, screw holding ability perpendicular to the plane of panel, and janka hardness perpendicular to the plane of the panel. Surface roughness and color of the panels were also measured. The results indicated that all the panels met the mechanical properties of general-purpose MDF requirements of EN 622-5. The surface roughness of the MDF panels containing burned wood decreased with increasing burned wood content but remained higher than the control panels. The dimensional stability of the MDF panels decreased with the incorporation of burned wood fibers as compared with the control MDF panels.     

Modelling and Optimization of Uranium (VI) Ions Adsorption Onto Nano-ZnO/Chitosan Bio-composite Beads with Response Surface Methodology (RSM)

Nano-ZnO-chitosan bio-composite beads were prepared for the sorption of \({\text{UO}}_{2}^{{2+}}\) from aqueous media. The resulting nano-ZnO/CTS bio-composite beads were characterized by TEM, XRD etc. The sorption of \({\text{UO}}_{2}^{{2+}}\) by bio-composite beads was optimized using RSM. The correlation between four variables was modelled and studied. According to RSM data, correlation coefficients (R²?=?0.99) and probability F-values (F?=?2.24?×?10^??10) show that the model fits the experimental data well. Adsorption capacity for nano-ZnO/CTS bio-composite beads was obtained at 148.7 mg/g under optimum conditions. The results indicate that nano-ZnO/CTS bio-composite beads are appropriate for the adsorption of \({\text{UO}}_{2}^{{2+}}\) ions from aqueous media. Also, the suitability of adsorption values to adsorption isotherms was researched and thermodynamic data were calculated.     

Offshore wind power potential of the Black Sea region in Turkey

Majority of the studies on offshore wind power potential assessment is limited to the examination of the wind speed only. This study examines the offshore wind power potential of the Black Sea coastal region in Turkey based on location selection criteria including territorial waters, military areas, civil aviation, shipping routes, pipelines and underground cables, social, and environmental concerns. Wind Atlas Analysis and Application Program (WAsP) is used to do the statistical analysis of wind speed and wind direction data for 20 locations in the Black Sea coastal region. WAsP results are then elaborated based on the location selection criteria for better assessment of offshore wind power utilization. The study reveals that there are limited numbers of locations for offshore wind power generation in the Black Sea region in spite of its long coastline. Moreover, there is a high need for a zoning change for Amasra shores in order to utilize high offshore wind power potential of Amasra. Our finding suggests that location selection criteria other than wind speed should definitely be considered for better assessment of the wind power potential of a region.     

Imidacloprid induced alterations in oxidative stress,biochemical, genotoxic,and immunotoxic biomarkers in non-mammalian model organism Galleria mellonella L. (Lepidoptera: Pyralidae)

Imidacloprid (IMI), a neonicotinoid insecticide, is widely used to control pests in agriculture. We investigated the changes in antioxidant enzyme activities, lipid peroxidation levels, biochemical effects, genotoxic effect, and immunotoxic effect of sublethal doses (0.25, 0.50, 0.75, and 1.00?µg) of IMI at different time periods (24, 48, 72, and 96?h) on a model organism, Galleria mellonella L. The results indicated that there were dose-dependent increases in both antioxidant enzyme activities (SOD and CAT) and MDA levels. Protein content was not affected by IMI at 24th and 48th, whereas it was decreased by the highest dose of IMI (1.00?µg) at 72nd and 96th h. Lipid and carbohydrate contents were reduced with increasing doses of IMI. Micronucleus frequency significantly increased in all IMI doses. All IMI doses caused a significant decrease in THC at 24th, 48th, and 72nd h. Our results can help to illustrate the effects of IMI in target organisms and indirectly may aid to discover potential risk of it on nontarget organisms. Future studies, at molecular levels, will be helpful in understanding the mechanism of action of IMI on these biomarkers.     

Root biomass and carbon storage in oriental spruce and beech stands in Artvin, Turkey

In this study, influence of slope position (south-facing vs. north-facing), species type and sampling time on fine (0-2 mm), small (2-5 mm) and coarse (5-10 mm) root biomass and carbon storage of oriental spruce (Picea orientalis) and oriental beech (Fagus orientalis) were investigated. Mean total root biomass of oriental spruce was 20160 kg ha(-1) in south-facing slopes and 17140 kg ha(-1) in north-facing slopes. Mean total belowground C storage of oriental spruce was 7861 kg ha(-1) in south-facing slopes and 6840 kg ha(-1) in north-facing slopes. Similarly, biomass and C storage of oriental beech were 17190 and 6690 kg ha(-1) in south-facing slopes, and 13260 and 5200 kg ha(-1) in north-facing slopes, respectively. Oriental spruce had significantly higher fine root biomass than did oriental beech in south-facing slopes. Fine root biomass was significantly higher in fall than in spring in south-facing slopes.     

The 210Po and 210Pb levels in surface sediment samples in the Izmir Bay (Aegean Sea-Turkey)

Bottom sediments reflect in general the relative contamination of a sea area. Therefore, a great deal of monitoring work has been dedicated to the analysis of bottom sediments. Izmir Bay is a very important pollution centre in Turkish Aegean coast region due to a densely populated community, industrial complex and maritime transportation, and there are many streams flowing into the bay that pass through a number of industrial and agricultural areas. It had received the majority of domestic and industrial wastewaters until the wastewater treatment plant was constructed. It is well known that sediments play an important role as reservoirs of a fraction of the pollution in aquatic systems. Therefore, sediment samples were collected monthly from three stations which are located in the inner part of the bay during the period January to December 2003. Temporal variations and seasonal changes on their ²¹⁰Po and ²¹⁰Pb contents were examined, and the activity concentrations of ²¹⁰Po and ²¹⁰Pb were found to vary from 43±6 to 132±12 and 27±5 to 91±9 Bq kg^???1 dry wt, respectively. The highest values of those natural radionuclides were measured at Kar??yaka Station because of the current systems of the bay. Seasonally, the ²¹⁰Pb levels were found to increase during the winter time for all the stations.     

Microwave-assisted synthesis of hydroxyapatite for the removal of lead(II) from aqueous solutions

Purpose

This study has the objective to evaluate the lead(II) removal capacity of hydroxyapatite powder synthesized by microwave as an alternative method to decrease production time and cost.

Methods

Hydroxyapatite (HA) was synthesized by a microwave-assisted precipitation method using calcium nitrate and ammonium hydrogen phosphate as calcium and phosphorus sources, respectively. X-ray diffraction and Fourier transform infrared results clearly revealed that the resulting powder was HA with high purity and crystallinity. The obtained powder was used for the removal of lead(II) from aqueous solutions. The effects of pH, amount of adsorbent, initial lead(II) concentration, and contact time were studied in batch experiments.

Results

In the adsorption experiments, maximum lead(II) retention was obtained at pH 6. Adsorption equilibrium was established after 40 min. It was found that the adsorption of lead(II) on HA was correlated well (R ²?=?0.958) with the Freundlich equation for the concentration range studied. Both ion exchange and adsorption process were thought to exist in the removal process.

Conclusions

This study indicates that easily and rapidly synthesized HA by microwave-assisted precipitation method could be used as an efficient adsorbent for removal of lead(II) from aqueous solutions.