Removal of Novacron Golden Yellow dye from aqueous solutions by low-cost agricultural waste: Batch and fixed bed study

The present work describes the removal of Novacron Golden Yellow (NGY) dye from aqueous solutions using peanut hulls. The experiments were performed with native, pretreated and immobilised forms of peanut hulls. The effect of various operational parameters (pH, biosorbent dose, initial dye concentration and temperature etc.) was explored during batch study. NGY showed maximum removal at low pH and low biosorbent dose. High initial dye concentration facilitated the biosorption process. Maximum dye removal with native, pretreated and immobilised biomass was found to be 35.7, 36.4 and 15.02 mg/g respectively. The experimental data were subjected to different kinetic and equilibrium models. The kinetic data confirmed the fitness of pseudo-second-order rate law for NGY biosorption. The equilibrium modelling was carried out by Freundlich, Langmuir and Temkin models. The isothermal data of NGY removal were best described by Freundlich adsorption isotherm. Negative values of Free energy change (Δ G⁰) for NGY with native and pretreated biomass depicted the spontaneous nature of biosorption process. In column mode, the effects of bed height, flow rate and initial dye concentrations were optimised. Maximum NGY biosorption (7.28 mg/g) was observed with high bed height, low flow rate and high initial concentration in continuous mode. Bohart–Adams model best fitted to the data obtained from column studies. The results indicated that the peanut hulls could be used effectively for the removal of dyes containing wastewater.     

Treatment of tannery wastewater in a pilot-scale hybrid constructed wetland system in Bangladesh

This paper reports the pollutant removal performances of a hybrid wetland system in Bangladesh for the treatment of a tannery wastewater. The system consisted of three treatment stages: a subsurface vertical flow (VF) wetland, followed by a horizontal flow (HF) and a VF wetland. The wetlands were planted with common reed (Phragmites australis), but employed different media, including organic coco-peat, cupola slag and pea gravel. In the first stage, experimental results demonstrated significant removal of ammonia (52%), nitrate (54%), BOD (78%), and COD (56%) under high organics loading rate (690 g COD m⁻² d⁻¹); simultaneous nitrification, denitrification, and organics degradation were attributed to the unique characteristics of the coco-peat media, which allowed greater atmospheric oxygen transfer for nitrification and organic degradation, and supply of organic carbon for denitrification. The second stage HF wetland produced an average PO₄ removal of 61%, primarily due to adsorption by the iron-rich cupola slag media. In the third treatment stage, which was filled with gravel media, further BOD removal (78%) from the tannery wastewater depleted organic carbon, causing the accumulation of NO₃ in the wastewater. Overall, the average percentage removals of NH₃-N, NO₃-N, BOD, COD, and PO₄ were 86%, 50%, 98%, 98% and 87%, respectively, across the whole hybrid system. The results provided a strong evidence to support widespread research and application of the constructed wetland as a low-cost, energy-efficient, wastewater treatment technology in Bangladesh.     

Optimization of alkaline extraction of natural dye from Henna leaves and its dyeing on cotton by exhaust method

The alkaline conditions for extraction of natural dye from Henna leaves were optimized and the resulting extract was used to further optimize its dyeing conditions on cotton by exhaust method. Dyeings without any mordant were compared with those obtained with premordanting and postmordanting with alum and iron. It was found that dyeings produced with alkaline extracts of Henna leaves have better colour strength than the dye extracts obtained in distilled water. Furthermore, dyeings with alkaline extracts have moderate to good fastness properties and that mordanting did not result in any significant improvement in fastness properties. Finally, in comparative studies between synthetic and this natural dye, it was inferred that natural dye has good potential to act as co-partner with synthetic dye.     

Health risk of arsenic in the alluvial aquifers of Lahore and Raiwind,Punjab Province,Pakistan: an investigation for safer well water

Environmental pollution has generated release of high amounts of arsenic (As) which ultimately are detected in the water of Indus Basin Punjab, Pakistan. The area is characterized by a semiarid climate, and alluvial deposits. This investigation, an extension of previously reported As-affected area in Lahore and Kasur, aimed to (1) assess the extent of water contamination in this area and (2) determine possible safer sites for future water use. In a comparative study, total As contamination of underground water from individual dwellings and community water supply of some villages located at the boundary of the Sheikhopura and Lahore districts, Pakistan were measured to compare with previously published data of villages located at the boundary of the Lahore and Kasur districts. The results showed variable levels of As in shallow drinking water wells and average concentration exceeding WHO guidelines value. As levels ranged from below 5.2 to 80 µg/L and mean 45.5 µg/L. The As concentrations were higher than WHO limits but lower than previous studied area. In addition, high salinity was found to be a serious concern for deteriorating groundwater quality rendering it unsuitable for drinking. Groundwater is predominantly of the Na–HCO₃ type with slightly alkaline pH. High pH values and competition of As with HCO₃ may serve as an important process for mobilization of As in the shallow groundwater of the region. Continuous monitoring and expansion of monitoring systems are necessary to establish safer wells within As-contaminated areas.     

Measurement of black carbon (BC) by an optical method and a thermal-optical method: Intercomparison for four sites

Comparison of black carbon (BC) measurements obtained by two methods was performed for aerosols samples collected on Whatman 41 (W-41) filters, using an optical method (Magee Scientific Optical Transmissometer Model OT-21) and a thermal-optical method (Sunset Laboratory Thermal-optical analyzer). Samples were collected from four sites: Albany (a small urban site, NY), Antalya (coastal site, Turkey), Whiteface Mountain (remote site, NY) and Mayville (rural site, NY). At Albany, comparison between the two methods showed excellent agreement; a least-squares regression line yielded a slope of 1.02, and r² = 0.88. Similar comparisons at Antalya (slope of 1.02, r² = 0.5) and Whiteface Mountain (slope of 0.92 and r² = 0.58) also gave very good relationship. At Mayville, the relationship between the two methods yielded somewhat lower regression: a slope of 0.75, and r² = 0.44. The data from the four locations, when plotted together, yielded an excellent agreement: a slope of 0.91, and r² of 0.84. Based on our measurements, it appears that optical measurement using the OT-21 can be successfully applied to determination of BC in W-41 filters. However, because of the variability in the chemical composition of BC aerosol at different locations, it is suggested that the calibration of OT-21 when using W-41 filters should be performed with a statistically significant numbers of samples for specific sites.     

Determination of elemental carbon in lake sediments using a thermal–optical transmittance (TOT) method

An improved chemical oxidation pretreatment method has been developed for the determination of elemental carbon (EC) [also known as black carbon (BC) or soot] in lake sediments, using a thermal–optical transmittance (TOT) carbon analyzer. The method employs six steps: (1) removal of carbonates by treatment with HCl; (2) removal of silicates by treatment with HF + HCl; (3) removal of any remaining carbonates by treatment with HCl; (4) removal of humic acids by treatment with NaOH; and (5) oxidation of kerogens by K₂Cr₂O₇ + H₂SO₄. A critical step of zinc chloride treatment was added; this apparently changes EC's morphology and enhances retention on quartz fiber filter, resulting in several-fold increased chemical yield. EC was determined using the TOT method with modified combustion timings. Carbon black (acetylene) and four NIST standard reference materials (SRMs) were used for quality control, and to assess the precision of the analysis. The EC recoveries from 18 carbon black samples varied from 90 to 111%, with a mean value of 99 ± 6%. The high EC recoveries confirmed the validity of the method. Char reference materials (i.e. chestnut wood and grass char) were used to determine potential contribution to EC in our measurements. The char references containing about 700 mg total organic carbon (OC) contributed ～1.5% EC. The measured EC values from four NIST standards were 17.0 ± 0.6, 24.2 ± 3.2, 5.6, and 1.9 ± 0.1 mg g_dw^?1 for SRM-1648, SRM-1649a, SRM-1941b and SRM-8704, respectively. These values in SRMs were in agreement (<±4%) with the previously reported values. The method was applied to determine the EC in sediment cores from an urban lake and a remote mountain lake in the Northeastern United States. The EC concentrations in two lakes mimic the model EC emissions from the industrial revolution in United States.     

Intensified constructed wetlands for the treatment of municipal wastewater: experimental investigation and kinetic modelling

Environmental Science and Pollution Research - This study reports organics and nutrient removal performances of the intensified constructed wetlands, i.e., tidal flow-based microbial fuel cell...     

Investigation of pesticide residues in water,sediments and fish samples from Tapi River,India as a case study and its forensic significance

Abstract

This research is a case study on detection of pesticides in river water, sediment as well as fish samples from Tapi River, among the major rivers of Gujarat, India. To investigate the misuse, concentration level and occurrence patterns of persistent pesticides, samples were collected from the river. Chlorpyrifos, methyl parathion, hexachlorocyclohexane (HCH), dichloro diphenyl trichloroethane (DDT) and endosulfan were analyzed by gas chromatography technique with flame ionization detector (FID). Scanty reports are available, but after 1999, no such data are reported as some of these pesticides have been banned. Although these pesticides are still in use which we observed from the obtained results. In this river, the amount of endosulfan, chlorpyrifos, and methyl parathion was observed in surface water with concentrations of 37.56?µg/L, 0.86?µg/L and 0.43?µg/L, respectively. Endosulfan, DDT and methyl parathion detected in sediment were 38.38?ng/g, 0.65?ng/g and 0.77?ng/g, respectively. In fish samples, levels of endosulfan, chlorpyrifos, and methyl parathion detected were 101.28, 0.392, and 3.49?ng/g correspondingly. Results showed that highly toxic pesticides are still being used in the surrounding area, and there is an urgent need for enforcement of rules to control the production and application of such pesticides.