Soil labile and recalcitrant carbon and nitrogen dynamics in relation to functional vegetation groups along precipitation gradients in secondary grasslands of South China

Environmental Science and Pollution Research - Soil labile and recalcitrant carbon (C) and nitrogen (N) are strongly controlled by plant inputs and climatic conditions. However, the interrelation...     

再生聚丙烯的洁净化和高质化应用

聚丙烯以其优异的机械性能、高的性价比和多重改性方式成为重要的通用树脂之一,这些产品废弃后产生了种类繁多和数量巨大的再生聚丙烯.通过将再生聚丙烯根据性能和来源进行分类,然后分类阐述各再生聚丙烯物料特点,结合再生聚丙烯改性方式,为高质化应用提出方向.     

Association of exposure to multiple metals with papillary thyroid cancer risk in China

Papillary thyroid cancer (PTC) has inflicted huge threats to the health of mankind. Metal pollution could be a potential risk factor of PTC occurrence, but existing relevant epidemiological researches are limited. The current case-control study was designed to evaluate the relationships between exposure to multiple metals and the risk of PTC. A total of 262 histologically confirmed PTC cases were recruited. Age- and gender-matched controls were enrolled at the same time. Urine samples were used as biomarkers to reflect the levels of environmental exposure to 13 metals. Conditional logistic regression models were adopted to assess the potential association. Single-metal and multi-metal models were separately conducted to evaluate the impacts of single and co-exposure to 13 metals. The increased concentration of urinary Cd, Cu, Fe, and Pb quartiles was found significant correlated with PTC risk. We also found the decreased trends of urinary Se, Zn, and Mn quartiles with the ORs for PTC. These dose-response associations between Pb and PTC were observed in the single-metal model and remained significant in the multi-metal model (OR_25-50th=1.39, OR_50-75th=3.32, OR_>75th=7.62, p for trend <0.001). Our study suggested that PTC was positively associated with urinary levels of Cd, Cu, Fe, Pb, and inversely associated with Se, Zn, and Mn. Targeted public health policies should be made to improve the environment and the recognition of potential risk factors. These findings need additional studies to confirm in other population.

     

以膨润土为辅助添加剂固化/稳定化污泥的试验研究

针对传统以水泥固化污泥,带来的水泥用量大与固化体的浸出液pH过高等问题,提出了以膨润土为添加剂辅助水泥固化/稳定化污泥的思路.通过开展无侧限抗压强度试验、毒性浸出试验,测量掺入膨润土后污泥固化体的强度、重金属浸出率、浸出液COD及pH值,研究该固化/稳定化方法的效果.结果表明,膨润土的掺入极大地提高了固化体的抗压强度,将掺入量为0.4(相对污泥的质量比)的水泥一半用膨润土替代时,固化体的强度提高了6左右.体积安定性也能够满足要求.随膨润土掺入量增加,固化体中锌、铅的浸出率与浸出液的pH值呈现不断减小的趋势,锌与铅的浸出率分别由6.9%下降至0.25%,9.6%下降至5%,pH值由12.3下降至12.1.在强碱条件下及烘干或风干条件下,铜会随着有机物的分解而析出,从而增加铜的浸出率,而膨润土的加入能弥补水泥造成的强碱环境及风干或烘干过程对固化污泥中铜的稳定产生的不利影响.     

Optimizing mixture properties of biodiesel production using genetic algorithm-based evolutionary support vector machine

Nowadays, biodiesel is used as one of the alternative renewable energy due to the increasing energy demand. However, optimum production of biodiesel still requires a huge number of expensive and time-consuming laboratory tests. To address the problem, this research develops a novel Genetic Algorithm-based Evolutionary Support Vector Machine (GA-ESIM). The GA-ESIM is an Artificial Intelligence (AI)-based tool that combines K-means Chaotic Genetic Algorithm (KCGA) and Evolutionary Support Vector Machine Inference Model (ESIM). The ESIM is utilized as a supervised learning technique to establish a highly accurate prediction model between the input--output of biodiesel mixture properties; and the KCGA is used to perform the simulation to obtain the optimum mixture properties based on the prediction model. A real biodiesel experimental data is provided to validate the GA-ESIM performance. Our simulation results demonstrate that the GA-ESIM establishes a prediction model with better accuracy than other AI-based tool and thus obtains the mixture properties with the biodiesel yield of 99.9%, higher than the best experimental data record, 97.4%.     

不同类型填料的三维电极/Fenton试剂法处理苯酚废水

采用不同类型填料对三维电极/Fenton试剂法处理苯酚模拟废水进行研究.结果表明.不同类型活性炭填料对苯酚去除率有很大影响,粒炭不适合做粒子电极,采用5.0 mm柱炭处理效果较好;采用石英砂与活性炭混合填料的处理效果比单一活性炭填料好,但苯酚去除率提高不明显;电解槽反应器中按比例投加涂膜活性炭和活性炭混合填料能明显提高苯酚去除率;当涂膜活性炭与活性炭体积比为1,2时,苯酚去除率最高,达96.8%.     

Studies of potential sources that contributed to atmospheric mercury in Toronto,Canada

This study identified sources of mercury (Hg) in downtown Toronto, Canada by analyzing gaseous elemental mercury (GEM), mercury associated with particles with sizes less than 2.5 microns (PHg < 2.5), and gaseous oxidized inorganic mercury (GOIM), commonly referred to as reactive gaseous mercury (RGM), and air pollutants (CO, NO_x, O₃, PM_2.5, SO₂) concentrations between Dec 2003 and Nov 2004. The data were analyzed using Positive Matrix Factorization (PMF) model, Principal Components Analysis (PCA), ratio analysis, back trajectories, and correlation analyses. The analyses suggest industrial sources (chemical production, metal production, sewage treatment), rather than coal combustion, were the major contributors to measured Hg levels. Overlap in source profiles for the Hg sources listed in the Canadian National Pollutant Release Inventory (NPRI) and lack of source profiles for urban sources were the major limitations to positively identifying sources from the PMF and PCA factors. Correlation analyses revealed direct emissions were the sources of GOIM in spring, summer, and fall, and the occurrence of GEM oxidation by ozone in the summer. Elevated Hg events are attributed to emissions from urban sources near the sampling site, regional point sources, and photochemical processes involving ozone.     

固定化啤酒废酵母对Cr(VI)的吸附

用2%海藻酸钠与1%明胶混合作为包埋剂固定啤酒废酵母,研究固定化啤酒废酵母对Cr(Ⅳ)的吸附特性.结果表明,固定化啤酒废酵母吸附Cr(Ⅵ)受吸附时间、起始pH、固定化菌体浓度、cr(Ⅵ)起始浓度及共存离子等因素的影响.确定固定化啤酒废酵母对Cr(Ⅵ)最佳吸附条件为:pH 2,Cr(Ⅵ)起始浓度100 mg/L,固定化菌体浓度2 g/L,吸附90 min.此条件下Cr(Ⅵ)的吸附率可达96.8%.Pd2+等并存离子可抑制固定化啤酒废酵母对Cr(Ⅵ)的吸附.用1 mol/L盐酸洗脱固定化啤酒废酵母所吸附的Cr(Ⅵ)3 h,解吸率为93.6%.     

壳聚糖复合絮凝剂处理造纸废水的实验研究

研究并考察了壳聚糖复合絮凝剂对造纸污水中COD和SS的絮凝效果,结果表明,当复合絮凝剂的配方和处理条件为：聚合硫酸铁（PFS）60 mg/L聚丙烯酰胺（PAM）2 mg/L壳聚糖（CTS）0.4 mg/L,pH为7.5时,其絮凝效果最佳,此时它对水中COD与SS的去除率分别达到57.4%和97.6%, 与传统絮凝剂PAC/PAM相比,COD与SS的去除率分别提高了10.1%和5.2%,药剂成本下降了21.1%,具有明显的经济效益与环境效益。     

工业企业厂界环境噪声监测中背景噪声监测及修正探讨

针对测量结果修正的相关要求,本文对新颁布的《工业企业厂界环境噪声排放标准》（GB12348-2008）和旧标准《工业企业厂界噪声测量方法》（GB／T12349-1990）在实际工作中的运用进行了比对、分析和探讨,并根据实际工作经验,提出了在背景噪声难以测量的一些特殊情况下的几种解决途径,主要提出噪声源声值与背景声值相差小于3dB（A）时的解决方案。