Source attribution for mercury deposition with an updated atmospheric mercury emission inventory in the Pearl River Delta Region,China

Estimated anthropogenic Hg emission was 11.9 tons in Pearl River Delta for 2014. Quantifying contributions of emission sources helps to provide control strategies. More attentions should be paid to Hg deposition around the large point sources. Power plant, industrial source and waste incinerator were priorities for control. A coordinated regional Hg emission control was important for controlling pollution. We used CMAQ-Hg to simulate mercury pollution and identify main sources in the Pearl River Delta (PRD) with updated local emission inventory and latest regional and global emissions. The total anthropogenic mercury emissions in the PRD for 2014 were 11,939.6 kg. Power plants and industrial boilers were dominant sectors, responsible for 29.4 and 22.7%. We first compared model predictions and observations and the results showed a good performance. Then five scenarios with power plants (PP), municipal solid waste incineration (MSWI), industrial point sources (IP), natural sources (NAT), and boundary conditions (BCs) zeroed out separately were simulated and compared with the base case. BCs was responsible for over 30% of annual average mercury concentration and total deposition while NAT contributed around 15%. Among the anthropogenic sources, IP (22.9%) was dominant with a contribution over 20.0% and PP (18.9%) and MSWI (11.2%) ranked second and third. Results also showed that power plants were the most important emission sources in the central PRD, where the ultra-low emission for thermal power units need to be strengthened. In the northern and western PRD, cement and metal productions were priorities for mercury control. The fast growth of municipal solid waste incineration were also a key factor in the core areas. In addition, a coordinated regional mercury emission control was important for effectively controlling pollution. In the future, mercury emissions will decrease as control measures are strengthened, more attention should be paid to mercury deposition around the large point sources as high levels of pollution are observed.     

Degradation of antipyrine in the Fenton-like process with a La-doped heterogeneous catalyst

A La-doped Co-Cu-Fe catalyst was synthesized for the antipyrine (ANT) removal. The La-doped catalyst had higher ANT removal than the control (95% vs. 54%). La reduced the particle size and increased the specific surface area of catalyst. The aim of this study was to synthesize a novel lanthanum (La) doped catalyst and to investigate antipyrine removal in wastewater using the Fenton-like process with the catalyst. The La-doped Co-Cu-Fe catalyst was synthesized using the modified hydrothermal method. Results showed that the La-doped catalyst had higher specific surface area and lower particle size than the catalyst without La doping (i.e., the control) (267 vs. 163 m²/g and 14 vs. 32 nm, respectively). Under the conditions of catalyst dosage 0.5 g/L, H₂O₂ concentration 1.70 g/L, and NaHCO₃ 0.1 g/L, the antipyrine removal within 60 min using the Fenton-like process with the La-doped catalyst was much higher than that with the control (95% vs. 54%). The hydroxyl radical concentration with the La-doped catalyst within 60 min was two times higher than that with the control (49.2 vs. 22.1 mg/L). The high catalytic activity of La-doped catalyst was mainly attributed to its high specific surface area based on the X-ray photoelectron spectroscopy result. Our La-doped catalyst should have great potential to remove antipyrine in wastewater using the heterogeneous Fenton-like process.     

Effects of cultivation strategies on the cultivation of Chlorella sp. HQ in photoreactors

Heterotrophic cultivation caused high level of ROS and high lipids accumulation. HMTC is the best culture strategy for improving the microalgal biomass. Chlorella sp. HQ had great nutrient removal capacity under five culture strategies. The effects of cultivation strategies (including autotrophic cultivation (AC), heterotrophic cultivation (HC), fed-batch cultivation (FC), heterotrophic+ autotrophic two-stage cultivation (HATC), and heterotrophic+ mixotrophic two-stage cultivation (HMTC)) on the growth and lipid accumulation of Chlorella sp. HQ and its total nitrogen (TN) and total phosphorus (TP) removal in secondary effluent were investigated in column photoreactors. The results showed that the TN and TP removal rates ranged between 93.72%–95.82% and 92.73%–100%, respectively, under the five different strategies. The microalgal growth potential evaluated by the maximal growth rate (R_max) was in the order of HMTC>HC>FC>AC>HATC. The values of biomass, total lipid yield, triacylglycerols (TAGs) yield, and total lipid content of the microalga cultivated in the last 5 d increased significantly, but the TAGs productivities of the five strategies were lower than those in the first 7 d. Compared with all the other cultivation strategies, the TAGs productivity and yield after 12 d of cultivation under the heterotrophic condition reached the highest values accompanying the highest level of intracellular reactive oxygen species (ROS), in which the TAGs yield reached 40.81 mg/L at the end of the cultivation period. The peaks in TAGs yield and ROS level suggested that HC was beneficial for lipids accumulation via regulating the cellular redox status and exerting ROS stress on microalgal cells. In summary, HMTC was the best cultivation strategy for improving the microalgal biomass and HC was the best strategy for microalgal TAGs accumulation to produce biodiesel.     

Recovery of Ni(II) from real electroplating wastewater using fixed-bed resin adsorption and subsequent electrodeposition

Resin adsorption and subsequent electrodeposition were used for nickel recovery. Treated wastewater can meet the Electroplating Pollutant Discharge Standard. The spent resin is completely regenerated by 3 BV of 4% HCl solution. 95.6% of nickel in concentrated eluent was recovered by electrodeposition. Effective recovery of high-value heavy metals from electroplating wastewater is of great significance, but recovering nickel ions from real electroplating wastewater as nickel sheet has not been reported. In this study, the pilot-scale fixed-bed resin adsorption was conducted to recover Ni(II) ions from real nickel plating wastewater, and then the concentrated Ni(II) ions in the regenerated solution were reduced to nickel sheet via electrodeposition. A commercial cation-exchange resin was selected and the optimal resin adsorption and regeneration conditions were investigated. The resin exhibited an adsorption capacity of 63 mg/g for Ni(II) ions, and the average amount of treated water was 84.6 bed volumes (BV) in the pilot-scale experiments. After the adsorption by two ion-exchange resin columns in series and one chelating resin column, the concentrations of Ni(II) in the treated wastewater were below 0.1 mg/L. After the regeneration of the spent resin using 3 BV of 4% (w/w) HCl solution, 1.5 BV of concentrated neutral nickel solution (>30 g/L) was obtained and used in the subsequent electrodeposition process. Using the aeration method, alkali and water required in resin activation process were greatly reduced to 2 BV and 3 BV, respectively. Under the optimal electrodeposition conditions, 95.6% of Ni(II) in desorption eluent could be recovered as the elemental nickel on the cathode. The total treatment cost for the resin adsorption and regeneration as well as the electrodeposition was calculated.     

Quantitative health risk assessment of inhalation exposure to automobile foundry dust

With a growing awareness of environmental protection, the dust pollution caused by automobile foundry work has become a serious and urgent problem. This study aimed to explore contamination levels and health effects of automobile foundry dust. A total of 276 dust samples from six types of work in an automobile foundry factory were collected and analysed using the filter membrane method. Probabilistic risk assessment model was developed for evaluating the health risk of foundry dust on workers. The health risk and its influencing factors among workers were then assessed by applying the Monte Carlo method to identify the most significant parameters. Health damage assessment was conducted to translate health risk into disability-adjusted life year (DALY). The results revealed that the mean concentration of dust on six types of work ranged from 1.67 to 5.40 mg/m³. The highest health risks to be come from melting, cast shakeout and finishing, followed by pouring, sand preparation, moulding and core-making. The probability of the risk exceeding 10⁻⁶ was approximately 85%, 90%, 90%, 75%, 70% and 45%, respectively. The sensitivity analysis indicated that average time, exposure duration, inhalation rate and dust concentration (C) made great contribution to dust health risk. Workers exposed to cast shakeout and finishing had the largest DALY of 48.64a. These results can further help managers to fully understand the dust risks on various types of work in the automobile foundry factories and provide scientific basis for the management and decision-making related to health damage assessment.

     

镉对单环刺螠非特异性免疫及组织蓄积的影响

为探究镉(Cd)对海洋动物的毒性效应,考察了不同质量浓度(0.005、0.05和0.5 mg·L~(-1)) Cd处理对单环刺螠相关免疫生理指标及主要组织中Cd蓄积量的影响。结果表明:Cd胁迫下,血细胞密度(density of hemocyte, DHC)先升后降再升,酚氧化酶(phenoloxidase, PO)活力先升后降,溶菌酶(lysozyme, LSZ)活力先降后升再降,至处理96 h,处理组DHC均显著高于对照组(P0.05),总蛋白含量变化不显著;除低浓度胁迫组(0.005 mg·L~(-1))PO活力与对照组相近外,其他处理组的PO和LSZ活力均显著低于对照组(P0.05)。超氧化物歧化酶(superoxide dismutase, SOD)活力和丙二醛(malondialdehyde, MDA)含量总体呈上升趋势,过氧化氢(H_2O_2)含量先升后降再升,至胁迫96 h,各处理组SOD活力、MDA和H_2O_2含量均显著高于对照组(P0.05)。总之,Cd胁迫对单环刺螠非特异性免疫影响显著,Cd的短期胁迫可刺激DHC、PO和LSZ升高,免疫力增强,而高浓度Cd的胁迫时间较长会造成机体解毒能力下降,持续刺激机体产生过氧化反应,MDA含量升高,可作为单环刺螠在Cd长期胁迫下的免疫检测指标。不同胁迫浓度组单环刺螠肌肉和消化道中的Cd含量随胁迫时间均呈上升趋势,且存在显著的时间-剂量-效应关系(P0.05),其蓄积量水平为:消化道肌肉,具有组织特异性。     

4种多环芳烃对仿刺参(Apostichopus japonicus)原肠胚发育的急性毒性研究

海洋中的多环芳烃(PAHs)具有较强的生物毒性,且海洋动物早期发育阶段是对环境因素变化响应的最敏感阶段。为探究海洋多环芳烃类有机污染物对仿刺参(Apostichopus japonicus)早期发育阶段原肠胚的毒性影响,采用半静态毒性实验方法,分别考察了4种多环芳烃苯并[a]芘、3-甲基菲、惹烯及2-甲基蒽对仿刺参原肠胚的24、48、72、96 h急性毒性效应。结果表明,在10、50、100、200μg·L~(-1)暴露浓度下,随着暴露时间的延长和暴露浓度的升高,4种多环芳烃对仿刺参原肠胚产生不同程度的急性毒性效应,仿刺参原肠胚存活率与4种多环芳烃浓度之间分别存在显著的剂量-效应关系(P0.05)。苯并[a]芘对仿刺参原肠胚在24、48 h的半致死浓度(LC_(50))分别为294.4、225.64 mg·L~(-1),3-甲基菲在24、48、72、96 h的LC_(50)分别为404.5、300.7、81.4、17.6mg·L~(-1),惹烯在24、48、72 h的LC_(50)分别为243.1、230、186 mg·L~(-1),2-甲基蒽在24、48、72、96 h的LC_(50)分别244、231.6、152.6、142.9 mg·L~(-1)。4种多环芳烃的安全浓度(SC)分别为39.76、49.8、61.8、62.6μg·L~(-1),其毒性大小顺序为苯并[a]芘3-甲基菲惹烯2-甲基蒽。基于定量构效关系(QSAR)的研究结果可知多环芳烃化合物的毒性差异可能与分子结构等性质有关。该实验为深入研究多环芳烃对海洋环境的毒性效应提供了理论依据。     

基于高通量分析方法的长江干流重庆段抗生素种类特征及来源初探

采用高通量分析方法对长江干流重庆段11个流域断面、2个市政污水处理厂进水和6个养殖场废水的潜在抗生素进行筛查,并结合抗生素使用调查探讨其来源。结果表明,(1)共检出83种抗生素,其中流域内检出36种,污水处理厂和养殖场废水中检出70种;磺胺间甲氧嘧啶检出率最高,在流域水体和废水的检出率分别为91%和55%,喹诺酮类是检出抗生素的主要类型;(2)长江干流重庆段下游检出抗生素数量高于上游检出抗生素;(3)有20种抗生素可能由上游携带和重庆市内排放2种方式进入流域,7种抗生素可能由上游携带入境,9种抗生素可能由重庆市内排放引入长江。     

磷酸三苯酯(TPP)和磷酸三(2-氯异丙基)酯(TCPP)诱导人胚肾细胞HEK293凋亡的机制研究

磷系阻燃剂对人体的潜在毒性作用引起了国内外研究者的广泛关注。肾脏是机体重要的排毒器官,若肾脏细胞受损,可能影响肾脏功能的正常发挥。本研究以人胚肾细胞HEK293为研究对象,结合传统毒理学实验,筛选出磷酸三苯酯(TPP)及磷酸三(2-氯异丙基)酯(TCPP)诱导人胚肾细胞HEK293凋亡的关键靶标基因p53。在此基础上采用分子对接模拟和光谱法分析发现,TPP和TCPP分别以嵌插方式和沟槽方式结合p53-DNA,改变基因片段的框架结构,启动分子起始事件,通过影响相关基因(Bax、Hrk、Bcl-2和Bad)的表达量,导致线粒体途径释放cyt c,最终激活Caspase 7实现细胞凋亡。研究结果阐明了此类污染物诱导凋亡的作用机制,为毒害化学品的污染防控提供理论依据。     

Chance-constrained programming (CCP)abatement of SO_2 emission for acid deposition control in Liuzhou City

A deterministic linear programming model which optimizes the abatement of each SO2 emission source, is extended into a CCP form by introducing equations of probabilistic constrained through the incorporation of uncertainty in the source-receptor-specific transfer coefficients. Based on the calculation of SO2 and sulfate average residence time for Liuzhou City, a sulfur deposition model has been developed and the distribution of transfer coefficients have been found to be approximately log-normal. Sulfur removal minimization of the model shows that the abatement of emission sources in the city is more effective, while control cost optimization provides the lowest cost programmes for source abatement at each allowable deposition limit under varied environmental risk levels. Finally a practicable programme is recommended.