Energy use and emissions from marine vessels: a total fuel life cycle approach

Regional and global air pollution from marine transportation is a growing concern. In discerning the sources of such pollution, researchers have become interested in tracking where along the total fuel life cycle these emissions occur. In addition, new efforts to introduce alternative fuels in marine vessels have raised questions about the energy use and environmental impacts of such fuels. To address these issues, this paper presents the Total Energy and Emissions Analysis for Marine Systems (TEAMS) model. TEAMS can be used to analyze total fuel life cycle emissions and energy use from marine vessels. TEAMS captures "well-to-hull" emissions, that is, emissions along the entire fuel pathway, including extraction, processing, distribution, and use in vessels. TEAMS conducts analyses for six fuel pathways: (1) petroleum to residual oil, (2) petroleum to conventional diesel, (3) petroleum to low-sulfur diesel, (4) natural gas to compressed natural gas, (5) natural gas to Fischer-Tropsch diesel, and (6) soybeans to biodiesel. TEAMS calculates total fuel-cycle emissions of three greenhouse gases (carbon dioxide, nitrous oxide, and methane) and five criteria pollutants (volatile organic compounds, carbon monoxide, nitrogen oxides, particulate matter with aerodynamic diameters of 10 microm or less, and sulfur oxides). TEAMS also calculates total energy consumption, fossil fuel consumption, and petroleum consumption associated with each of its six fuel cycles. TEAMS can be used to study emissions from a variety of user-defined vessels. This paper presents TEAMS and provides example modeling results for three case studies using alternative fuels: a passenger ferry, a tanker vessel, and a container ship.     

An Overview of Epa’s Implementation of the Noise Control Act of 1972

The Noise Control Act of 1972, passed by the U. S. Congress, established the Office of Noise Abatement and Control within the U. S. Environmental Protection Agency. The following discussion presents the background of this legislation, a general conceptual approach to implementing the legislation, and the practical implementation of that legislation to date by the Office of Noise Abatement and Control (ONAC).     

Polychlorinated biphenyls (PCBs) in indoor air originating from sealants in contaminated and uncontaminated apartments within the same housing estate

Twenty-four congeners of polychlorinated biphenyls (PCBs) were measured in 83 air samples and 20 elastic sealants samples of apartments with PCB-containing sealants. In addition, PCBs were measured in 21 air samples from reference apartments located in an uncontaminated section of the same estate. The PCB_tot levels in the air of the contaminated section were 168-3843 ng m⁻³ (mean: 1030 ng m⁻³), while the mean levels in the reference apartments were 6.03 ng m⁻³. The sum of the 24 measured PCB congeners in sealants from the contaminated section was 187-221 680 mg kg⁻¹. Principal component analysis revealed four groups among the sealant samples with different congener compositions, only two of which were clearly similar to known PCB mixtures, while two were not. Significant correlations and intercorrelations were observed between the lower chlorinated congeners in air and sealant, e.g. for PCB 28_air and 28_seal (p = 0.04) and for PCB 28_air and 52_air, 52_seal. However, no correlation was observed between the lower chlorinated congeners and the sums of PCB (∑PCB₆ or ∑PCB₂₄) or the higher chlorinated congeners. Analysis of air concentrations in relation to questionnaire data indicated that the indoor air levels could be reduced by increased cleaning and airing frequencies.     

Emission factors for PCDD/PCDF and dl-PCB from open burning of biomass

The Stockholm Convention on Persistent Organic Pollutants includes in its aims the minimisation of unintentional releases of polychlorinated dibenzo-dioxins and dibenzofurans (PCDD/PCDF) and dioxin like PCB (dl-PCB) to the environment. Development and implementation of policies to achieve this aim require accurate national inventories of releases of PCDD/PCDF/dl-PCB. To support this objective, the Conference of Parties established a process to review and update the UNEP Standardized Toolkit for Identification and Quantification of Dioxin and Furan Releases. An assessment of all emission inventories was that for many countries open burning of biomass and waste was identified as the major source of PCDD/PCDF releases. However, the experimental data underpinning the release estimates used were limited in number and, consequently, confidence in the accuracy of the emissions predictions was low. There has been significant progress in measurement technology since the last edition of the Toolkit in 2005. In this paper we reassess published emission factors for release of PCDD/PCDF and dl-PCB to land and air.In total, four types of biomass and 111 emission factors were assessed. It was found that there are no systematic differences in emission factors apparent between biomass types or fire classes. The data set is best described by a lognormal distribution. The geometric mean emission factors (EFs) for releases of PCDD/PCDF to air for the four biomass classes used in the Toolkit (sugarcane, cereal crops, forest and savannah/grass) are 1.6 μg TEQ (t fuel)⁻¹, 0.49 μg TEQ (t fuel)⁻¹, 1.0 μg TEQ (t fuel)⁻¹ and 0.4 μg TEQ (t fuel)⁻¹, respectively. Corresponding EFs for release of PCDD/PCDF to land are 3.0 ng TEQ (kg ash)⁻¹, 1.1 ng TEQ (kg ash)⁻¹, 1.1 ng TEQ (kg ash)⁻¹ and 0.67 ng TEQ (kg ash)⁻¹. There are now also sufficient published data available to evaluate EFs for dl-PCB release to air for sugarcane, forest and grass/savannah; these are 0.03 μg TEQ (t fuel)⁻¹, 0.09 μg TEQ (t fuel)⁻¹ and 0.01 μg TEQ (t fuel)⁻¹, respectively. The average EF for dl-PCB release to land is 0.19 ng TEQ (kg ash)⁻¹. Application of these EFs to national emissions of PCDD/PCDF for global estimates from open burning will lower previous estimates of PCDD/PCDF releases to air and to land by 85% and 90%, respectively. For some countries, the ranking of their major sources will be changed and open burning of biomass will become less significant than previously concluded.     

Phytoestrogens and mycotoxins in Iowa streams: an examination of underinvestigated compounds in agricultural basins

This study provides the first broad-scale investigation on the spatial and temporal occurrence of phytoestrogens and mycotoxins in streams in the United States. Fifteen stream sites across Iowa were sampled five times throughout the 2008 growing season to capture a range of climatic and crop-growth conditions. Basin size upstream from sampling sites ranged from 7 km2 to > 836,000 km2. Atrazine (herbicide) also was measured in all samples as a frame-of-reference agriculturally derived contaminant. Target compounds were frequently detected in stream samples: atrazine (100%), formononetin (80%), equol (45%), deoxynivalenol (43%), daidzein (32%), biochanin A (23%), zearalenone (13%), and genistein (11%). The nearly ubiquitous detection of formononetin (isoflavone) suggests a widespread agricultural source, as one would expect with the intense row crop and livestock production present across Iowa. Conversely, the less spatially widespread detections of deoxynivalenol (mycotoxin) suggest a more variable source due to the required combination of proper host and proper temperature and moisture conditions necessary to promote Fusarium spp. infections. Although atrazine concentrations commonly exceeded 100 ng L(-1) (42/75 measurements), only deoxynivalenol (6/56 measurements) had concentrations that occasionally exceeded this level. Temporal patterns in concentrations varied substantially between atrazine, formononetin, and deoxynivalenol, as one would expect for contaminants with different source inputs and processes of formation and degradation. The greatest phytoestrogen and mycotoxin concentrations were observed during spring snowmelt conditions. Phytoestrogens and mycotoxins were detected at all sampling sites regardless of basin size. The ecotoxicological effects from long-term, low-level exposures to phytoestrogens and mycotoxins or complex chemicals mixtures including these compounds that commonly rake place in surface water are poorly understood and have yet to be systematically investigated in environmental studies.     

Polybrominated diphenyl ether in sewage sludge in Germany

Sewage sludge samples from 11 municipal waste water treatment plants in Germany were collected from March 2002 to June 2003. Total Tri- to HpBDE concentrations (sum of significant congeners BDE 28, 47, 99, 153, 154 and 183) ranged from 12.5 to 288 (median 108) and DeBDE (BDE 209) concentrations from 97.1 to 2217 (median 256) ng/gd.m. BDE 209 dominated the congener profile. A significant change of the Tri- to HpBDE congener profile (% of total BDE 28, 47, 99, 153, 154, 183 without 209) in sludge from different stages of the waste water treatment process (primary sludge, secondary excess sludge and (dewatered) digested sludge), indicating a degradation of DeBDE to these congeners, was not observed.     

An agenda for assessing and improving conservation impacts of sustainability standards in tropical agriculture

Sustainability standards and certification serve to differentiate and provide market recognition to goods produced in accordance with social and environmental good practices, typically including practices to protect biodiversity. Such standards have seen rapid growth, including in tropical agricultural commodities such as cocoa, coffee, palm oil, soybeans, and tea. Given the role of sustainability standards in influencing land use in hotspots of biodiversity, deforestation, and agricultural intensification, much could be gained from efforts to evaluate and increase the conservation payoff of these schemes. To this end, we devised a systematic approach for monitoring and evaluating the conservation impacts of agricultural sustainability standards and for using the resulting evidence to improve the effectiveness of such standards over time. The approach is oriented around a set of hypotheses and corresponding research questions about how sustainability standards are predicted to deliver conservation benefits. These questions are addressed through data from multiple sources, including basic common information from certification audits; field monitoring of environmental outcomes at a sample of certified sites; and rigorous impact assessment research based on experimental or quasi‐experimental methods. Integration of these sources can generate time‐series data that are comparable across sites and regions and provide detailed portraits of the effects of sustainability standards. To implement this approach, we propose new collaborations between the conservation research community and the sustainability standards community to develop common indicators and monitoring protocols, foster data sharing and synthesis, and link research and practice more effectively. As the role of sustainability standards in tropical land‐use governance continues to evolve, robust evidence on the factors contributing to effectiveness can help to ensure that such standards are designed and implemented to maximize benefits for biodiversity conservation.     

Observations on rock boring by Alpheus saxidomus (Crustacea: Alpheidae)

This study describes some aspects of the distribution, ecology, and rock boring behaviour of the shrimp Alpheus saxidomus Holthuis from the Pacific coast of Costa Rica. This species has a typical hammer-shaped dactylus on the first right pereiopod of females and males that shows tracks of abrasion at the hammer-head. Structural analysis of this hammer-dactylus proved that it is suited for the mechanical treatment of rocks. The very thick and calcified cuticle of the hammer is mostly formed by the sclerotinized, hard exocuticle, which has abundant pore canals.