The design of cyclonic pre-heaters in suspension cement kilns

Cement manufacturing consumes two main types of energy: fuel and electricity. On average, energy costs represent 40% of the total production costs per ton of cement. The challenge is to reduce the consumption of energy to about 3000 MJ/ton clinker without the consumption of massive additional amounts of electricity, which is normally associated with additional fuel-saving measures. This can only be achieved by implementing sound thermal energy optimization measures. Energy-efficient suspension cement kilns are now widely applied and use a cascade of cyclonic pre-heaters of moist particulate feedstock, with heat transfer from hot kiln exhaust gas to particles being a function of heat transfer coefficient, temperature difference and gas–solid contact mode and time. The gas–solid contact mode and time depend on particle movement in cyclones, which has previously been studied by positron emission particle tracking. Heat transfer is governed by Nusselt–Reynolds equations, with gas velocity and properties being a function of the temperature profile along the cascade of cyclones. A stepwise approach of the design thus combines changing hydrodynamics and heat transfer along the successive cyclones, with the overall thermal balance of the cascade as control. This approach leads to major design recommendations, as developed in the present paper.     

Evaluation of an extraction method for a mixture of endocrine disrupters in sediment using chemical and in vitro biological analyses

Aquatic sediments are contaminated by a wide diversity of organic pollutants such as endocrine-disrupting chemicals (EDCs) which encompass a broad range of chemical classes having natural and anthropogenic origins. The use of in vitro bioassays is now widely accepted as an alternative method for their detection in complex samples. However, based on the diversity of EDC chemical properties, their common extraction is difficult and comprehensive validation of extraction methods for a bioanalysis purpose is still weakly documented. In this study, we compared the performance of several organic solvents, i.e., acetone, methanol, dichloromethane, heptane, dichloromethane/acetone (50:50, v/v), dichloromethane/methanol (50:50, v/v), heptane/acetone (50:50, v/v), and heptane/methanol (50:50, v/v), to extract a diversity of active chemicals from a spiked sediment matrix using pressurized liquid extraction. For this purpose, we defined a mixture of 12 EDCs with a wide range of polarity (2?<?log Kow?<?8) (i.e., estrone, 17β-estradiol, bisphenol A, o,p′DDT, 4-tert-octylphenol, fenofibrate, triphenyl phosphate, clotrimazole, PCB-126, 2,3,7,8 TCDD, benzo[k]fluoranthene, and dibenzo[a,h]anthracene). Working concentrations of each individual compound in the mixture were determined as equipotent concentrations on the basis of the concentration-addition (CA) model applied to in vitro estrogenic, dioxin-like, and pregnane X receptor (PXR)-like activities. Extraction efficiencies based on both chemical and biological analyses were assessed in triplicate in artificial blank sediment spiked with this mixture and in natural sediment contaminated by native EDCs. In both spiked and natural sediment, MeOH/DCM yields the best recovery while heptane was the least efficient solvent. Our study provided the validation of a sediment extraction methodology for EDC bioanalysis purposes, which can be used for comprehensive environmental contamination characterization.     

Experimental Evaluation of Waste Tires Utilization in Cement Kilns

ABSTRACT

The present work outlines the main results of a full-scale study conducted on the utilization of waste tires as auxiliary fuel in cement production. Experimental tests were conducted for determining the influence of shredded tires on combustion conditions, emissions produced, and the characteristics of clinker obtained, for feeding ratios over 35% in terms of total heat input. The addition of tire chips did not lead to any appreciable modification in either the whole process or the quality of clinker produced; gaseous emissions were mostly unaffected, with significant improvements related to the reductions obtained in nitrogen and sulfur oxides concentrations. Experimental findings from tests conducted with tire chips exposed to kiln combustion flue gases compare favorably with the typical burnout times derived from theoretical approaches. These experimental data and calculations to estimate particle trajectories beyond the injection point, through proper theoretical analysis of the kinetic behavior, result in important indications for the shredding operation and for optimum injection modes.     

The underutilization of street markets as a source of food security indicators in famine early warning systems: a case study of Ethiopia

Famine Early Warning Systems (EWS) are reliant on data aggregated from multiple sources. Consequently, they are often insensitive to localized changes in food security status, leading to delayed response or interventions. While price and infrastructural data are often gathered, this case study suggests that local street markets and vendor knowledge are underutilized. Few efforts have been made to monitor systematically the street markets as an indicator of local stressors. Findings from Ethiopia show that knowledge generated by expanding food security indicators in this sector can be used in combination with EWS to facilitate earlier intervention in, or to monitor more effectively, on-going humanitarian crises. Indicators developed from this study are accurate, cost effective, and sensitive to local climatic and food stressors.     

Comparison of Two Methods for Judging Distances Near Overhead Power Lines

Sixteen certified crane operators performed several series of boom movements toward a segment of a typical power line using a 100-ton lifting capacity crane equipped with an 18-m boom, a single lifting cable, and a hard ball hook. The operators were instructed to stop the crane movement when the lifting cable reached the edge of the danger zone located 3 m from the power line. To achieve each maneuver, they evaluated the distance between the nearest wire and their crane using two methods: free sighting and the use of highly visible markers delineating the edge of the danger zone. The dependent measure was the distance between the lifting cable and the edge of the danger zone. Results showed that operators were generally unreliable when judging the distance between their crane and the power line when sighting the power line directly, but the use of markers proved to be much more precise and reliable in targeting the edge of the danger zone.     

Environmental impacts of training activities at an air weapons range

Within Canada, it has been recognized in the last decade that military training activities may have impacts on the environmental quality of training ranges. However, impacts of activities specific to Air Force Bases have not yet been intensely documented. A hydrogeological study was accomplished at the Cold Lake Air Weapons Range, Alberta, to evaluate the environmental impacts of using bombs, rockets, strafing, and open burning/open detonation (OB/OD) on the quality of soil, ground water, surface water, and lake sediments. Samples were analyzed for metals, anions, ammonium perchlorate (NH(4)ClO(4)), and energetic materials (EM). It was found that training activities did not result in measured values being exceeded on the basis of guidance values for surface water and lake sediments. Contamination by metals was mostly limited to soils, and some metals may be related to the use of bombs (Cd, Cu, Pb), strafe (Cu), and rockets (As, Ba, Cd, Cr, Cu, Fe, Ni, Pb, U, V, Zn). TNT (2,4,6-trinitrotoluene) was the main EM found in soils, while RDX (hexahydro-1,3,5-trinitro-1,3,5-triazine) was more common in ground water. Both are related to live bombing, while nitroglycerine (NG) is related to rocket use and was detected in soils only. Aluminum, nitrate, and ammonium perchlorate detected in ground water may be related to live bombing or rockets. OB/OD operations resulted in the presence of various EM in soils, and of perchlorate and nitrate in ground water. Contamination by metals and explosives in soils was localized around the targets and varied significantly in time; however, in ground water it was more constant and may persist for a period of several years after a target has been removed.     

Occupational exposure in the fluorescent lamp recycling sector in France

The fluorescent lamp recycling sector is growing considerably in Europe due to increasingly strict regulations aimed at inciting the consumption of low energy light bulbs and their end-of-life management. Chemical risks were assessed in fluorescent lamp recycling facilities by field measurement surveys in France, highlighting that occupational exposure and pollutant levels in the working environment were correlated with the main recycling steps and processes.The mean levels of worker exposure are 4.4 mg/m³, 15.4 μg/m³, 14.0 μg/m³, 247.6 μg/m³, respectively, for total inhalable dust, mercury, lead and yttrium. The mean levels of airborne pollutants are 3.1 mg/m³, 9.0 μg/m³, 9.0 μg/m³, 219.2 μg/m³, respectively, for total inhalable dust, mercury, lead and yttrium. The ranges are very wide. Surface samples from employees’ skin and granulometric analysis were also carried out. The overview shows that all the stages and processes involved in lamp recycling are concerned by the risk of hazardous substances penetrating into the bodies of employees, although exposure of the latter varies depending on the processes and tasks they perform. The conclusion of this study strongly recommends the development of a new generation of processes in parallel with more information sharing and regulatory measures.     

Back-extrapolation of estimates of exposure from current land-use regression models

Land use regression has been used in epidemiologic studies to estimate long-term exposure to air pollution within cities. The models are often developed toward the end of the study using recent air pollution data. Given that there may be spatially-dependent temporal trends in urban air pollution and that there is interest for epidemiologists in assessing period-specific exposures, especially early-life exposure, methods are required to extrapolate these models back in time. We present herein three new methods to back-extrapolate land use regression models. During three two-week periods in 2005–2006, we monitored nitrogen dioxide (NO₂) at about 130 locations in Montreal, Quebec, and then developed a land-use regression (LUR) model. Our three extrapolation methods entailed multiplying the predicted concentrations of NO₂ by the ratio of past estimates of concentrations from fixed-site monitors, such that they reflected the change in the spatial structure of NO₂ from measurements at fixed-site monitors. The specific methods depended on the availability of land use and traffic-related data, and we back-extrapolated the LUR model to 10 and 20 years into the past. We then applied these estimates to residential information from subjects enrolled in a case–control study of postmenopausal breast cancer that was conducted in 1996.Observed and predicted concentrations of NO₂ in Montreal decreased and were correlated in time. The estimated concentrations using the three extrapolation methods had similar distributions, except that one method yielded slightly lower values. The spatial distributions varied slightly between methods. In the analysis of the breast cancer study, the odds ratios were insensitive to the method but varied with time: for a 5 ppb increase in NO₂ using the 2006 LUR the odds ratio (OR) was about 1.4 and the ORs in predicted past concentrations of NO₂ varied (OR～1.2 for 1985 and OR～1.3–1.5 for 1996). Thus, the ORs per unit exposure increased with time as the range and variance of the spatial distributions decreased, and this is due partly to the regression coefficient being approximately inversely proportional to the variance of exposure. Changing spatial variability complicates interpretation and this may have important implications for the management of risk. Further studies are needed to estimate the accuracy of the different methods.     

Detection of environmental clastogens and aneugens in human fibroblasts by cytokinesis-blocked micronucleus assay associated with immunofluorescent staining of CENP-A in micronuclei

The cytokinesis-blocked micronucleus (CBMN) assay, in combination with fluorescent in situ hybridization (FISH) of human pan-centromeric DNA probes, or with CREST antibodies that specifically stain kinetochore proteins, is widely used on several cell types. It distinguishes micronuclei containing one or several whole chromosomes, which are positively labeled (centromere positive micronucleus, C+MN, due to aneugenic effect), or acentric chromosome fragments, which are unlabeled due to the absence of centromere (centromere negative micronucleus, C−MN, due to clastogenic effect). However, the very slight level of the centromeric signals obtained with the FISH technique on primary human fibroblasts, a cell type commonly used in environmental genetic toxicology, leads to great difficulties in distinguishing C+MN and C−MN. Furthermore, the CREST technique may lead to inappropriate results particularly with regards to variations in antibody composition between patient sera. Our results show that the in vitro CBMN, in combination with immunofluorescence staining of CENP-A (centromere protein A), efficiently screens genotoxicants for their ability to induce clastogenic and/or aneugenic effects. We propose the in vitro CBMN assay in combination with immunofluorescence staining of CENP-A as a suitable tool in environmental genotoxicity testing of primary human fibroblasts.     

Vertical fluxes of aromatic and aliphatic hydrocarbons in the Northwestern Mediterranean Sea

Aliphatic and aromatic hydrocarbon fluxes were measured in time series sediment trap samples at 200 m and at 1000 m depths in the open Northwestern Mediterranean Sea, from December 2000 to July 2002. Averaged fluxes of n-alkanes, UCM and T-PAH₃₅ were 2.96 ± 2.60 μg m⁻² d⁻¹, 64 ± 60 μg m⁻² d⁻¹ and 0.68 ± 0.59 μg m⁻² d⁻¹, respectively. Molecular compositions of both hydrocarbon classes showed a contamination in petrogenic hydrocarbons well above the background levels of such an open site, whereas pyrolytic hydrocarbons stand in the range of other open Mediterranean locations. Fluxes displayed ample interannual and seasonal variabilities, mainly related to mass flux variation while concentration evolutions trigger secondary changes in pollutant fluxes. High lithogenic flux events exported particles with a larger pollutant load than biogenic particles formed during the spring bloom and during the summer. Sinking hydrocarbons were efficiently transported from 200 m to 1000 m.