Substance-related environmental monitoring

Background  Due to the requirements of the EU Water Framework Directive and other legal regulations (e.g., national laws like the German Federal Soil Protection Act), but also due to the implementation of the new EU chemicals management system REACH, environmental monitoring will gain increasing importance for the surveillance of environmental quality as well as for the assessment of chemicals. Against this background, the Work Group on ‘Environmental Monitoring’ of the Division of ‘Environmental Chemistry and Ecotoxicology’ within the German Chemical Society has compiled a position paper on substance-related environmental monitoring. Scope  Core elements of this position paper are the definitions of important terms like monitoring, exposure monitoring, effect monitoring, and integrated monitoring. Moreover, temporal and spatial aspects (monitoring of spatial distributions, trend monitoring, and retrospective monitoring) and their applications are discussed. The main focus of this position paper is the coverage of aspects which have to be observed for the preparation and implementation of a monitoring program. Essential is the clear specification of the targets of the monitoring which determine the development of the monitoring concept and its realization, e.g., if environmental media (compartments) or organisms are most appropriate as samples for the aim of the study. Of course, also the properties of the target substances are important (e.g., lipophilicity/bioaccumulation as pre-requisite for an exposure monitoring with organisms). Finally, the monitoring phases of sample planning, sampling, storage and transport of samples, selection of analytical methods, quality assurance measures as well as reporting are discussed. Perspectives  An important issue for the future is to link the quantification of chemicals in environmental compartments (exposure and pollution monitoring) more closely to the study of biological effects (effect monitoring) than has been the case up to now. Furthermore, by inclusion of a spatial differentiation, a comprehensive evaluation of the state of an ecosystem can be obtained and the relevance of the results improved. Practical examples of monitoring studies which illustrate various aspects covered in this position paper will be presented in a series of publications by members of the Work Group in the following issues of this journal.

Concentrations of polybrominated diphenyl ethers (PBDEs) in matched samples of human milk,dust and indoor air

Polybrominated diphenyl ethers (PBDEs) are lipophilic, persistent pollutants found worldwide in environmental and human samples. Exposure pathways for PBDEs remain unclear but may include food, air and dust. The aim of this study was to conduct an integrated assessment of PBDE exposure and human body burden using 10 matched samples of human milk, indoor air and dust collected in 2007–2008 in Brisbane, Australia. In addition, temporal analysis was investigated comparing the results of the current study with PBDE concentrations in human milk collected in 2002–2003 from the same region.PBDEs were detected in all matrices and the median concentrations of BDEs -47 and -209 in human milk, air and dust were: 4.2 and 0.3 ng/g lipid; 25 and 7.8 pg/m³; and 56 and 291 ng/g dust, respectively. Significant correlations were observed between the concentrations of BDE-99 in air and human milk (r = 0.661, p = 0.038) and BDE-153 in dust and BDE-183 in human milk (r = 0.697, p = 0.025). These correlations do not suggest causal relationships — there is no hypothesis that can be offered to explain why BDE-153 in dust and BDE-183 in milk are correlated. The fact that so few correlations were found in the data could be a function of the small sample size, or because additional factors, such as sources of exposure not considered or measured in the study, might be important in explaining exposure to PBDEs. There was a slight decrease in PBDE concentrations from 2002–2003 to 2007–2008 but this may be due to sampling and analytical differences. Overall, average PBDE concentrations from these individual samples were similar to results from pooled human milk collected in Brisbane in 2002–2003 indicating that pooling may be an efficient, cost-effective strategy of assessing PBDE concentrations on a population basis.The results of this study were used to estimate an infant's daily PBDE intake via inhalation, dust ingestion and human milk consumption. Differences in PBDE intake of individual congeners from the different matrices were observed. Specifically, as the level of bromination increased, the contribution of PBDE intake decreased via human milk and increased via dust. As the impacts of the ban of the lower brominated (penta- and octa-BDE) products become evident, an increased use of the higher brominated deca-BDE product may result in dust making a greater contribution to infant exposure than it does currently.To better understand human body burden, further research is required into the sources and exposure pathways of PBDEs and metabolic differences influencing an individual's response to exposure. In addition, temporal trend analysis is necessary with continued monitoring of PBDEs in the human population as well as in the suggested exposure matrices of food, dust and air.     

Biodegradation potential of MTBE in a fractured chalk aquifer under aerobic conditions in long-term uncontaminated and contaminated aquifer microcosms

The potential for aerobic biodegradation of MTBE in a fractured chalk aquifer is assessed in microcosm experiments over 450 days, under in situ conditions for a groundwater temperature of 10 °C, MTBE concentration between 0.1 and 1.0 mg/L and dissolved O₂ concentration between 2 and 10 mg/L. Following a lag period of up to 120 days, MTBE was biodegraded in uncontaminated aquifer microcosms at concentrations up to 1.2 mg/L, demonstrating that the aquifer has an intrinsic potential to biodegrade MTBE aerobically. The MTBE biodegradation rate increased three-fold from a mean of 6.6 ± 1.6 μg/L/day in uncontaminated aquifer microcosms for subsequent additions of MTBE, suggesting an increasing biodegradation capability, due to microbial cell growth and increased biomass after repeated exposure to MTBE. In contaminated aquifer microcosms which also contained TAME, MTBE biodegradation occurred after a shorter lag of 15 or 33 days and MTBE biodegradation rates were higher (max. 27.5 μg/L/day), probably resulting from an acclimated microbial population due to previous exposure to MTBE in situ. The initial MTBE concentration did not affect the lag period but the biodegradation rate increased with the initial MTBE concentration, indicating that there was no inhibition of MTBE biodegradation related to MTBE concentration up to 1.2 mg/L. No minimum substrate concentration for MTBE biodegradation was observed, indicating that in the presence of dissolved O₂ (and absence of inhibitory factors) MTBE biodegradation would occur in the aquifer at MTBE concentrations (ca. 0.1 mg/L) found at the front of the ether oxygenate plume. MTBE biodegradation occurred with concomitant O₂ consumption but no other electron acceptor utilisation, indicating biodegradation by aerobic processes only. However, O₂ consumption was less than the stoichiometric requirement for complete MTBE mineralization, suggesting that only partial biodegradation of MTBE to intermediate organic metabolites occurred. The availability of dissolved O₂ did not affect MTBE biodegradation significantly, with similar MTBE biodegradation behaviour and rates down to ca. 0.7 mg/L dissolved O₂ concentration. The results indicate that aerobic MTBE biodegradation could be significant in the plume fringe, during mixing of the contaminant plume and uncontaminated groundwater and that, relative to the plume migration, aerobic biodegradation is important for MTBE attenuation. Moreover, should the groundwater dissolved O₂ concentration fall to zero such that MTBE biodegradation was inhibited, an engineered approach to enhance in situ bioremediation could supply O₂ at relatively low levels (e.g. 2–3 mg/L) to effectively stimulate MTBE biodegradation, which has significant practical advantages. The study shows that aerobic MTBE biodegradation can occur at environmentally significant rates in this aquifer, and that long-term microcosm experiments (100s days) may be necessary to correctly interpret contaminant biodegradation potential in aquifers to support site management decisions.     

Occurrence and congener specific profiles of polybrominated diphenyl ethers and their hydroxylated and methoxylated derivatives in breast milk from Catalonia

The presence of polybrominated diphenyl ethers (PBDEs) from mono to hepta brominated and 11 hydroxylated (OH-) and methoxylated (MeO-) PBDEs was examined in 37 breast milk samples collected from 11 mothers living in Barcelona. An extraction method based on accelerated solvent extraction followed by gas chromatography coupled to high resolution mass spectrometry was used to inequivocally identify all target compounds at the low pg g(-1) lw level. Data obtained were examined for absolute and relative concentrations and specific PBDE, OH- and MeO-PBDE congener patterns. Sigma PBDE concentration ranged between 1,161 and 1,372,797 pg g(-1) lw and BDEs 47, 99, 100, 153 and 183 accounted for more than 80% of the total PBDEs. All tri and tetra OH- and MeO-PBDEs compounds were detected at levels between 6 and 14,984 pg g(-1)lw. The median ratio OH/PBDE and MeO-PBDEs/PBDEs was from 2.9% to 1.6%, respectively, suggesting either that PBDE metabolism to OH- and MeO- derivatives is not an important degradation route in humans or either OH- and MeO-PBDEs are rapidly excreted. No significant correlation was observed between PBDEs and OH- and MeO-PBDE, although OH- and OMe-PBDEs co-occurred in mothers' milk (R(2)=0.5349). According to the daily intake of PBDEs and OH- and MeO-PBDEs, which was between 0.47 and 363 ng d(-1) (excluding a smoking donor), potential health risks associated with these compounds are assessed.     

Impact of water saturation level on arsenic and metal mobility in the Fe-amended soil

The impact of water saturation level (oxidizing-reducing environment) on As and metal solubility in chromium, copper, arsenic (CCA)-contaminated soil amended with Fe-containing materials was studied. The soil was mixed with 0.1 and 1 wt% of iron grit (Fe(0)) and 1, 7 and 15 wt% of oxygen scarfing granulate (OSG, a by-product of steel processing). Solubility of As and metals was evaluated by a batch leaching test and analysis of soil pore water. Soil saturation with water greatly increased As solubility in the untreated as well as in the Fe-amended soil. This was related to the reductive dissolution of Fe oxides and increased concentration of As(III) species. Fe amendments showed As reducing capacity under both oxic and anoxic conditions. The cytotoxicity of the soil pore water correlated with the concentration of As(III). The Fe-treatments as well as water saturation of soil were less significant for the solubility of Cu, Cr and Zn than for As. The batch leaching test used for waste characterization substantially underestimated As solubility that could occur under water-saturated (anaerobic) conditions. In the case of soil landfilling, other techniques than Fe-stabilization of As containing soil should be considered.     

Choice of parameters for passive shielding of power-frequency magnetic fields

Epidemiological studies suggesting the possibility of harmful effects on human (specifically children’s leukaemia) due to long-term exposure to magnetic fields of extremely low frequency (e.g. 50/60 Hz) and relatively low values (i.e. over the microtesla range) have stirred high activity in the topic of magnetic field mitigation. To reduce these fields, it is common to use passive metal screens (e.g. plates made of aluminium or steel). To design them, effective and fast numerical computations are highly desirable. In this article, a method is presented, which computes various parameters of screens in a given shielding problem and yields magnetic field distribution and shielding factors. The method takes into consideration the 3D field distribution and is able to solve systems with large aspect ratios (thin thickness in comparison with its other dimensions); this is a common problem where other methods such as finite elements often experience difficulties. The presented method computes separately the field inside and outside the screens. Afterwards, the solutions are “stitched” together along the border of the subregions. Two practical examples are given of the developed numerical method.     

On experimental setup in bioelectromagnetics

Bioeffects created by electromagnetic field (EMF) are the subject of intensive studies. This paper critically considers estimations of exposure to EMF in bioelectromagnetic experiments. Results of calculations presented herein show the significant role of the presence of conducting bodies (the exposure system) near an object under test on EMF energy absorption as well as mutual interactions between simultaneously exposed objects. Our aims herein are twofold: firstly to find a way to refer measurement results to free-space conditions in order to enable comparison of results obtained in different laboratories, and secondly to show that EMF energy absorption in any exposed object is different and that this difference is a function of the size of the exposure system, the number of exposed objects, and the particular properties (i.e., the electromagnetic structure) of the objects. In the authors’ opinion the existence of interactions caused by the presence of the exposure system and other exposed objects is a reason why remarkable differences are observed between experiments performed even under supposedly identical conditions. The presented considerations and conclusion suggest wider participation of physicists and engineers in bioelectromagnetic experiments in order to ensure the correctness of metrological aspects of these experiments.     

Urbanization and its impact on groundwater: a remote sensing and GIS-based assessment approach

The perils of unplanned urbanization and increasing pressure of human activities on hydro-geomorphologic system often result in modification of the existing recharge mechanism, which leads to many environmental consequences. In the present research, an attempt has been made to investigate the applicability of remote sensing and geographical information system (GIS) in dealing with spatial and temporal variability of dynamic phenomena, like urbanization and its impact on groundwater. This paper covers primarily, quantitative and qualitative impacts of urban growth on the behavior of aquifer in Ajmer city (India). Urban growth of the Ajmer city in last 17 years has been estimated from the satellite images. Database related to urbanization and groundwater has been created in GIS. Groundwater recharge has been computed using a water balance approach known as Water Level Fluctuation Methodology. Recharge estimation methodology has been implemented in GIS to introduce the spatial variability of hydro-geological characteristics. Further, temporal and spatial variations in groundwater quality and quantity have been correlated with urban growth using overlay analysis in GIS. The study reveals a general decline in water table and quality with urbanization. Further, remote sensing and GIS technologies have been found useful in assessment of spatial and temporal phenomena of urbanization and its impact on groundwater system.     

Screening analysis of volatile organic contaminants in commercial inorganic coagulants used for drinking water treatment

A method for quality screening is suggested to detect volatile impurities in inorganic coagulants that are used for drinking water treatment. Static headspace gas chromatography with mass spectrometry detection (HS–GCMS) is sensitive and selective to detect volatiles in low concentrations. This study has discovered that volatile organic impurities are detectable in ferric and aluminium-based coagulants which are used for drinking water treatment. For ferric chloride, 2-propanol was detected at a level of 17–24 μg ml⁻¹, acetone at 0.7–1.7 μg ml⁻¹, 1,1,1-trichloroacetone at 0.02–0.04 μg ml⁻¹, trichloromethane at 0.01–0.02 μg ml⁻¹ and toluene at 0.01–0.12 μg ml⁻¹. For ferric chloride sulfate, acetone was detected at a level of 0.12 μg ml⁻¹, 1,1,1-trichloroacetone at 0.06–0.08 μg ml⁻¹, trichloromethane at 0.13–0.23 μg ml⁻¹, bromodichloromethane at 0.04–0.06 μg ml⁻¹ and dibromochloromethane at 0.04–0.05 μg ml⁻¹. For aluminium hydroxide chloride, only trichloromethane was detectable, but below the method detection limits (MDL). Although the concentrations of these impurities in commercial coagulants are low, this observation is important and should have impact on water industries for them to pay attention to the chemicals they are using for drinking water production.