Exposure to polychlorinated biphenyls from an overheated transformer

A Polychlorinated Biphenyl (PCB) containing transformer released approximately 50 gallons of askarel oil. No polychlorinated dibenzofurans (PCDF) or polychlorinated dibenzodioxins (PCDD) were detected in a sample of the askarel (analytical limit of detection of 40 parts per billion per isomer group). Skin irritation, unusual tiredness, and headaches occurred in approximately 20% of the individuals at the scene of the incident. Serum PCB levels, and mean values for blood and urine tests were within normal ranges.     

Field studies of ethoprop movement and degradation in two Florida soils

Unsaturated- and saturated-zone field studies were conducted under two different agricultural conditions in Florida, U.S.A., to measure the movement and degradation of ethoprop.When ethoprop was applied to a sand soil in an orange grove located on the Florida central ridge, soil residues declined with a half-life of 13 days to near the limit of detection (0.01 μg g⁻¹ within 2 months. Ethoprop residues were generally contained in the upper 2 m of soil. Although low levels of ethoprop were found in four groundwater samples within the first 3 months after application, the cause of these isolated and transient residues could not be determined. The data show that there was no widespread plume of ethoprop residues beneath or downgradient from the treated area.On a flatwood soil on the west coast of Florida, ethoprop was incorporated into raised beds and protected by a plastic mulch in which tomatoes were grown. When the plastic mulch was present, ethoprop soil residues declined with a half-life of 40 days and were confined to the upper 0.3 m of soil. After the mulch was removed at crop harvest, the remaining ethoprop dissipated with a half-life of 12 days. Groundwater residues in excess of 1 μg L⁻¹ were confined to a single sample collected after the well had been damaged during a rototilling operation. Resides of < 1 μg L⁻¹ were present in three later samples from this well. At the sampling interval where the highest residues were detected in the damaged well, ethoprop residues of < 1 μg L⁻¹ were also found in three other wells but no residues were detected in these wells in later samples.     

Biotoxizit?tstests mit PAK Die Nodulation in der Leguminosen-Rhizobien-Symbiose als sensibler Wirkungsparameter

Im Zusammenhang mit der Umweltchemikalienprüfung und der Untersuchung und Kontrolle kontaminierter B?den besteht gro?er Bedarf an Testverfahren mit h?heren Pflanzen, die schnell, einfach und preisgünstig durchzuführen sind und bereits bestehende Testverfahren nach OECD- und BBA-Richtlinien sinnvoll erg?nzen k?nnen. Dieser Beitrag stellt einen Biotoxizit?tstest vor, der die Nodulation in der Leguminosen-Kn?llchen-Symbiose als sensiblen Wirkungsparameter für die Belastung mit polyzyklischen aromatischen Kohlenwasserstoffen (PAK) benutzt. Fremdstoff, Pflanze und Mikroorganismus werden dabei auf einer festen Matrix in Kontakt miteinander gebracht; das axenische System erlaubt die Untersuchung der Fremdstoffwirkung sowohl auf den Gesamtorganismus Pflanze, als auch auf die Interaktion von Pflanze und Mikroorganismus (Kn?llchenbildung). In Dose-Response-Versuchen zeigte sich der Wirkungsparameter Nodulation, gemessen als Anzahl Wurzelkn?llchen pro Pflanze, sensibler als andere pflanzliche Wachstumsparameter. There is great need for toxicity tests with higher plants for the investigation and monitoring of chemicals in the environment — especially for tests which are quick, easy, and inexpensive. Such tests should add to and improve current guidelines, e.g., OECD- and BBA-Guidelines. This article describes the nodulation of leguminous plants withRhizobium bacteria used in a bioassay with polycyclic aromatic hydrocarbons (PAH). Plants growing on a solid medium were exposed simultaneously to bacteria and PAH. This axenic culture system allows to observe the impact of PAH on plant growth and the interaction between plant and bacteria (nodulation). Dose-response-experiments indicated that nodulation measured as number of nodules per plant, was more sensitive to the inhibition by PAH than other plant growth parameters.     

Environmental hazard profile of organic chemicals: An experimental method for the assessment of the behaviour of organic chemicals in the ecosphere by means of simple laboratory tests with 14C labelled chemicals

The concept of “Environmental Hazard Profile” developed at this institute has been tested with 100 ¹⁴C-labelled organic compounds. Concentration factors in activated sludge, in algae and fish were determined. The microbial degradation of the chemicals to CO₂ in activated sludge and the decomposition to CO₂ under artificial light were determined. Ranking of compounds is given in the order of falling concentration factors and accumulation in rats respectively, and decreasing rates of decomposition. Relationship between chemical structure and accumulative and degradative behaviours is demonstrated using some selected groups of chemicals, such as benzenes, phenols, biphenyls and polyaromatic hydrocarbons. Correlations between the octanol/water partition coefficient, concentration factors and rates of decomposition could be established. Evaluation of test compounds was possible using hazard profiles obtained by the sum of single test results.     

Geochemical and Pb isotopic evidence for sources and dispersal of metal contamination in stream sediments from the mining and smelting district of Príbram, Czech Republic

Stream sediments from the mining and smelting district of Príbram, Czech Republic, were studied to determine the degree, sources and dispersal of metal contamination using a combination of bulk metal and mineralogical determinations, sequential extractions and Pb isotopic analyses. The highest metal concentrations were found 3-4 km downstream from the main polymetallic mining site (9800 mg Pb kg(-1), 26 039 mg Zn kg(-1), 316.4 mg Cd kg(-1), 256.9 mg Cu kg(-1)). The calculated enrichment factors (EFs) confirmed the extreme degree of contamination by Pb, Zn and Cd (EF>40). Lead, Zn and Cd are bound mainly to Fe oxides and hydroxides. In the most contaminated samples Pb is also present as Pb carbonates and litharge (PbO). Lead isotopic analysis indicates that the predominant source of stream sediment contamination is historic Pb-Ag mining and primary Pb smelting (206Pb/207Pb=1.16), while the role of secondary smelting (car battery processing) is negligible.     

Washing as a remediation technology applicable in soils heavily polluted by mining-metallurgical activities

A permanent solution in order to remediate a heavily contaminated soil is washing it utilizing the appropriate reagents. The study presented in this paper deals with the washing of a soil highly polluted by mining and metallurgical activities. Pollution consists of slags, sulphur compound waste and various low grade lead condensates, all rich in heavy metals and metalloids (Pb, As, Cu, Zn, Mn and Fe). Soil was washed with deionized water, 6, 3, 2 and 1 M HCl, 6 M H(2)SO(4), 6 M HNO(3) and 0.1 M Na(2)EDTA. High extraction efficiency was achieved with respect to hydrochloric acid even at the lowest concentration; the solubility of pollutants in nitric acid was low, while sulphuric acid was proven to be problematic with respect to lead. Mobilization of metals and metalloids under DI water effect was minimal indicating that the elements fraction that is weakly bound to soil particles is insignificant. Furthermore, a kinetic study was undertaken, utilizing 1 M HCl and 0.1 M Na(2)EDTA. Results illustrated that 1 M HCl was more effective for intermediate mixing times (up to 4 h) while 0.1 M Na(2)EDTA was better applicable to short mixing times (<1 h) and low pH values (pH < 7.1). 1 M HCl was proven to be very effective for the removal of pollutants from contaminated soil but the high metal content of the resulting solution necessitates further treatment for the retention of metals.