天津市非道路移动源污染物排放清单开发

基于天津市非道路移动源污染管控需求,根据调研收集到的2015年非道路移动源活动水平数据,采用环保部《非道路移动污染源排放清单编制技术指南(试行)》推荐的核算方法,建立较为完整的天津市非道路移动源排放清单,分析污染物的时空分布.2015年,天津市非道路移动源排放CO 6.15×10~3t、HC 2.45×10~3t、NO_x2.90×10~4t、PM 1.45×10~3t、SO_21.37×10~4t.船舶污染物排放占比最高,为所有非道路移动源污染物排放总量的73.66%,主要分布于天津港区;其次是非道路移动机械,占21.66%,主要分布于市郊种植业和养殖业区县、城市建设和人群活动较为密集的城区;民航飞机和铁路机车占比较小,分别为3.55%和1.13%,主要分布于机场和铁路沿线.总体上,非道路移动源从3月开始排放量逐渐升高,而年底和年初(冬季)排放量相对较低.     

Influence of physical properties of solid biomass fuels on the design and cost of storage installations

The aim of this work consists on determining biomass fuels properties and studying their relation with fixed and variable costs of stores and handling systems. To do that, dimensions (length and diameter), bulk density, particle density and durability of several brands and batches of wood pellets and briquettes were tested, according to international standards. Obtained results were compared with those in literature. Bulk density tests were applied for several other biomass fuels too, and later used to determinate which ones of all the biomass-fuels tested are economically more profitable for a typical transport/store system made of a screw conveyor and a concrete bunker silo.     

Development of a new masters program for occupational physicians in Flanders

Background: discussions with occupational physicians and a postal survey identified the shortcomings of previous programs, mainly found in the fields of occupational hygiene, ergonomics, environmental health and management.Objectives of the new program: basic knowledge (see content), the development of problem solving skills, scientific and social attitudes.Content: first year: occupational health practice, occupational hygiene, epidemiology, work physiology, toxicokinetics and dynamics and in service training (4 weeks). Second year: occupational pathology, environmental health, ergonomics, social legislation, safety, management and in service training (4 weeks). The total study load is estimated at about 1600 hours per year.Methods: interactivity is stimulated by the introduction of interdisciplinary seminars, project work in groups and Socratic dialogue. The objectives, contents and teaching and student-evaluation methods of the separate items were defined before selecting teachers.Finality of the program: a masters title sufficient to practice occupational medicine in Belgium. A subsequent postacademic training of 2 years, while at work, will be required for the title of specialist in occupational medicine, valid at European Union (EU) level. It will include preparing and publically defending a thesis.Statement: The collaboration of ex-students working in the field is essential in the development and quality assessment of adequate teaching programs.     

Societal implications of nanotechnology: occupational perspectives

Nanotechnology-infused products have begun to enter the market in spite of the fact that many sectors of society are still debating whether or not exposure to such products will result in detrimental side effects. Due to a lack of regulation of nanoproducts, it is difficult to track these products to assess how they interact with humans and the environment. Acknowledging this limitation, several studies are starting to investigate situations where individuals are exposed to nanoparticles in the workplace; it is to be noted that manufacturing of materials is the first stage in the product life cycle where exposure may occur. This paper reviews and discusses the potential societal implications associated with the manufacturing of nanoparticles: health concerns, workers’ perceptions, rights, ethics, and the role of policy and regulation. Scenarios are presented, possible implications are discussed, and recommendations are given for appropriate action. Finding the right solution to the identified implications represents a critical challenge. In summary, it is imperative that all stakeholders including industry, academia, government entities, and the public adopt a proactive attitude to ensure that nanotechnology matures in a sustainable manner.     

Characterization of ²⁴¹ Am and ¹³⁴Cs bioaccumulation in the king scallop Pecten maximus: investigation via three exposure pathways

In order to understand the bioaccumulation of ²⁴¹Am and ¹³⁴Cs in scallops living in sediments, the uptake and depuration kinetics of these two elements were investigated in the king scallop Pecten maximus exposed via seawater, food, or sediment under laboratory conditions. Generally, ²⁴¹Am accumulation was higher and its retention was stronger than ¹³⁴Cs. This was especially obvious when considering whole animals exposed through seawater with whole-body concentration factors (CF_7d) of 62 vs. 1, absorption efficiencies (A_0l) of 78 vs. 45 for seawater and biological half-lives (T_b½l) of 892 d vs. 22 d for ²⁴¹Am and ¹³⁴Cs, respectively. In contrast, following a single feeding with radiolabelled phytoplankton, the assimilation efficiency (AE) and T_b½l of ¹³⁴Cs were higher than those of ²⁴¹Am (AE: 28% vs. 20%; T_b½l: 14 d vs. 9 d). Among scallop tissues, the shells always contained the higher proportion of the total body burden of ²⁴¹Am whatever the exposure pathway. In contrast, the whole soft parts presented the major fraction of whole-body burden of ¹³⁴Cs, which was generally associated with muscular tissues. Our results showed that the two radionuclides have contrasting behaviors in scallops, in relation to their physico-chemical properties.     

Contamination of fish by organochlorine pesticide residues in the Ouémé River catchment in the Republic of Bénin

In the Republic of Bénin, aquatic ecosystems are subject to poisoning risks due to the inappropriate use of pesticides, such as washing of empty bottles in rivers and using pesticides to catch fish. In some areas, cotton fields are located near riverbanks, increasing the probability of pesticide emission to the river. To assess contamination levels in the Ouémé River catchment area, different fish species were collected from different geographical areas along the river. DDT, its metabolites and isomers were the most frequently identified pesticides in fish flesh, alpha-endosulfan, beta-endosulfan, dieldrin, telodrin, lindane and octachlorostyrene were also detected. Concentrations of pesticide residues in fish ranged from 0 to 1364 ng/g lipid. A preliminary risk assessment indicated that the daily intake of chlorinated pesticides by people consuming fish from the Ouémé River still is rather low and does not present an immediate risk.     

Organochlorine and organophosphorous pesticide residues in the Ouémé River catchment in the Republic of Bénin

The Ouémé River is one of the most important rivers in the Republic of Bénin. It is 510 km long and its catchment drains 75% of the country. In this study, organochlorine and organophosphorous pesticide residues were measured in more than 35 sediment samples collected on nine locations along the Ouémé River from upstream to downstream. Except for one location, Tanéka-Koko, all areas were contaminated by more than 20 pesticides. Organochlorine pesticides identified in sediment samples included pp'-DDE, op'-DDD, pp'-DDD, op'-DDT, pp'-DDT, alpha-endosulfan, beta-endosulfan, endosulfan sulphate, alpha-HCH, beta-HCH, lindane, aldrin, dieldrin, endrin, telodrin, isodrin, cis- and trans-heptachlorepoxide, hexachlorbutadiene, hexachlorobenzene and octachlorostyrene. The organophosphorous pesticide chlorpyrifos, used in a new formulation to protect cotton, was also identified. In some areas, the concentrations of organochlorine pesticides in the sediment of the Ouémé River exceeded environmental quality standards and are reason for concern.     

Assessment of plasma gasification of high caloric waste streams

Plasma gasification is an innovative technology for transforming high calorific waste streams into a valuable synthesis gas and a vitrified slag by means of a thermal plasma. A test program has been set up to evaluate the feasibility of plasma gasification and the impact of this process on the environment. RDF (refuse derived fuel) from carpet and textile waste was selected as feed material for semi-pilot gasification tests. The aim of the tests was: (1) to evaluate the technical feasibility of making a stable synthesis gas; (2) to characterize the composition of this synthesis gas; (3) to define a suitable after-treatment configuration for purification of the syngas and (4) to characterize the stability of the slag, i.e., its resistance to leaching for use as a secondary building material. The tests illustrate that plasma gasification can result in a suitable syngas quality and a slag, characterized by an acceptable leachability. Based on the test results, a further scale-up of this technology will be prepared and validation tests run.