Ergonomic evaluation of a new truck seat design: a field study

A postural evaluation of commercial licensed truck drivers was conducted to determine the ergonomic benefits of a truck seat prototype in comparison with an industry standard seat. Twenty commercially licensed truck drivers were recruited to perform a 90-min driving task. Postures were assessed using accelerometers and a backrest and seat pan pressure mapping system. Subjective discomfort measurements were monitored using two questionnaires: ratings of perceived discomfort (RPD) and the automotive seating discomfort questionnaire (ASDQ). Participants reported significantly higher discomfort scores when sitting in the industry standard seat. Participants sat with more lumbar lordosis and assumed a more extended thoracic posture when seated in the prototype. Pairing the gluteal backrest panel with the adjustable seat pan also helped reduce the average sitting pressure on both the seat pan and the backrest. The prototype provided several postural benefits for commercially certified truck drivers, as it did for a young and healthy population.     

Emergency braking is affected by the use of cruise control

Objective: We compared the differences in the braking response to vehicle collision between an active human emergency braking (control condition) and cruise control (CC) or adaptive cruise control (ACC).

Methods: In 11 male subjects, age 22 to 67 years, we measured the active emergency braking response during manual driving using the accelerator pedal (control condition) or in condition mimicking CC or ACC. In both conditions, we measured the brake reaction time (BRT), delay to produce the peak braking force (PBD), total emergency braking response (BRT + PBD), and peak braking force (PBF). Electromyograms of leg and thigh muscles were recorded during braking. The tonic vibratory response (TVR), Hoffman reflex (HR), and M-waves were recorded in leg muscles to explore the change in sensorimotor control.

Results: No difference in PBF, TVR amplitude, HR latency, and H_max/M_max ratio were found between the control and CC/ACC conditions. On the other hand, BRT and PBD were significantly lengthened in the CC/ACC condition (240 ± 13 ms and 704 ± 70 ms, respectively) compared to control (183 ± 7 ms and 568 ± 36 ms, respectively). BRT increased with the age of participants and the driving experience shortened PBD and increased PBF.

Conclusions: In male subjects, driving in a CC/ACC condition significantly delays the active emergency braking response to vehicle collision. This could result from higher amplitude of leg motion in the CC/ACC condition and/or by the age-related changes in motor control. Car and truck drivers must take account of the significant increase in the braking distance in a CC/ACC condition.     

Progress in assisted natural remediation of an arsenic contaminated agricultural soil

A contaminated soil was collected in a field adjacent to a derelict As((III)) smelter in Reppel (Bocholt, Belgium). A single soil treatment (% by soil weight) based on either iron grit (SS, 1%), beringite (B, 5%), or iron grit (1%) + beringite (5%) (BSS) was applied. Untreated and treated Reppel soils and a control soil were placed in lysimeters inside a greenhouse and cropped annually. The efficiency of soil treatments in decreasing As and metals in exposure sources and restoring soil functions was assessed 6 years after the treatments commenced. Decreases in extractable Cd, Mn, Zn and As occurred in the BSS soil. Only BSS treatment reduced both As and metal concentrations in leachates. BSS treatment produced best growth of lettuce and cabbage, the highest shoot and pod yields for dwarf bean, the lowest As, Cd and Zn concentrations in plant tissues, and partly restored Rhizobium nodulation on bean roots. The epigeic earthworm (Dendrobaena octaedra) could only survive in the BSS soil. Depurated living worms from the BSS soil had Cd concentration similar to those in control worms, but higher As, Ca, Fe, and Zn concentrations. Based on physiologically based extraction test (PBET), As bioaccessibility was reduced from 12% (untreated soil) to 7.4% (BSS) and 3% (SS), but only the SS treatment decreased the bioaccessibility of Cd (-30%) and Pb (-35%). The range of chemical and biological indicators suggested that BSS amendment was the most effective treatment for restoration of normal soil functions 6 years after initial treatment of the Reppel soil.     

Production of separation-nozzle systems for uranium enrichment by a combination of X-ray lithography and galvanoplastics

X-ray lithography using synchrotron radiation has been applied in a multi-step process for the production of plastic moulds to be used in the fabrication of separation nozzles by electrodeposition. For characteristic dimensions of a few microns a total height of the nozzle structure of about 400 μm has been achieved. Structural details of about 0.1 μm are being reproduced across the total thickness of the polymer layer. The surface finish of metallic separation nozzles produced by electrodeposition was equivalent to the high quality of the polymer surface. The separation-nozzle systems fabricated by the described method allow an increase by a factor three of the gas pressure in separationnozzle plants as compared to the present standard. This results in considerable savings in the enrichment of ²³⁵U for nuclear power production.     

Abiotic aging of water- soluble 3- hydroxybutyric acid oligomers as monitored by capillary zone electrophoresis

Oligomers of poly(3-hydroxybutyric acid) (P(3-HB)) were prepared by partial degradation of high molecular weight P(3-HB) dissolved in 1,2-dichloroethane/water mixture in the presence of p-toluene sulfonic acid (p-TSA). The water-soluble fraction of the resulting oligomers was extracted from the mixture with neutral sodium phosphate buffer. Capillary zone electrophoresis showed that the aqueous extracts were composed of two series of oligomers. The first one was composed of one to seven P(3-HB) oligomers (O(3-HB)). In contrast, the second series was composed of four oligomers characterized by the presence of a terminal C=C bond [O’(3-HB)]. Both series of oligomers behaved differently insofar as their fate in aqueous medium was concerned. The 0(3-HB) compounds were stable over a period of 2 months. On the other hand, the population of the O’(3-HB) oligomers varied, the proportion of oligomers increasing with aging time.     

A comparison of five pesticides adsorption and desorption processes in thirteen contrasting field soils

Batch adsorption and desorption experiments were performed using thirteen agricultural soil samples and five pesticides. Experimental data indicated a gradient in pesticide adsorption on soil: trifluralin > 2,4-D > isoproturon> atrazine > bentazone. Atrazine, isoproturon and trifluralin adsorption were correlated to soil organic matter content (r2 = 0.7, 0.82, 0.79 respectively). Conversely, bentazone adsorption was governed by soil pH (r2 = 0.68) while insignificant effect has been shown in the case of 2,4-D. Multiple linear regressions were used to combine relationships between the various soil parameters and the Freundlich adsorption coefficient (K(f)) of each pesticide. Then desorption was assessed since it may reflect some of the interactions involved between the pesticides and the soil components. Adsorbed molecules were released into aqueous solution in the following order: bentazone > atrazine> isoproturon> 2,4-D > trifluralin. The occurrence of hysteresis did not allow an accurate interpretation of the pesticide desorption data because of the possible interplay of several processes.     

Competition between alga (Pseudokirchneriella subcapitata), humic substances and EDTA for Cd and Zn control in the algal assay procedure (AAP) medium

The chemical speciation of trace metals in natural waters has important implications for their biogeochemical behavior. Trace metals are present in natural waters as dissolved species and associated with colloids and particles. The complexation of one trace metal (Cd and Zn at 200 and 390 microg/l respectively) with a green alga Pseudokirchneriella subcapitata in colloid-free algal culture medium and in presence of colloidal humic substances (HS) is presented. The influence of the nature of colloids was also addressed using three "standard" HS: fulvic acid (FA) and, soil (SHA) and peat humic acids (PHA). The chemical speciation model, MINTEQA2, was used to simulate the influence of pH and standardized culture medium on metal association with humic substances. The model was successfully modified to consider the differences in the metal complexation with fulvic (FA) and humic acids (HA). The deviations of concentrations of metals associated with HS between experimental results and model predictions were within a factor of approximately 2. The results of speciation model highlight the influence of the experimental conditions (pH, EDTA) used for alga bioassay on the behavior of Cd and Zn. The computed speciation suggests working with a pH buffered/EDTA-free mixture to avoid undesirable competition effects. The behavior of Cd and Zn in solution is more strongly influenced by HS than by alga. Metal-HS associations depend on metal and humic substance nature and concentration. Cd is complexed to a higher extent than Zn, in particular at larger HS concentration, and the complexation strength is in the order FA相似文献   

Comparison of the complexation potential of extracellular polymeric substances (EPS), extracted from activated sludges and produced by pure bacteria strains, for cadmium, lead and nickel

This paper provides information on the metal complexation potential of extracellular polymeric substances (EPS), extracted from activated sludges and from eight pure cultures of bacteria isolated from the same activated sludge. The EPS extracted from pure bacteria cultures are mainly composed of proteins and low quantities of polysaccharides and uronic acids in comparison with EPS extracted from activated sludges. The EPS studied present two apparent pK(a) and the IR spectra show the presence of the same functional groups on all the EPS studied. The ability of EPS to complex Cd, Pb and Ni, was studied at pH 7 with Chau and Ruzic's models using polarography titration. All of the EPS exhibited a greater ability to complex Pb than Ni, Cd showing the weakest affinity overall. The EPS extracted from the pure cultures of bacteria were less able to complex the metals than that extracted from activated sludges. Literature data, IR data and EPS phosphorous content, supported by the EPS pK(a), revealed that carboxylic and phosphoric groups may play a major role in binding to metals at pH 7. This study underlines the importance of metal exposure in order for bacteria to secrete or modify EPS. After exposure, the EPS then exhibit the greatest capacity to bind metal in order to protect bacteria from harmful effects of heavy metals.