The convergence of alternative food networks within “rural development” initiatives: the case of the New Rural Reconstruction Movement in China†

Rural sociologists and geographers have conceptualised different rural development trajectories including “the agri-industrial model”, “the post-productivist model” and “the rural development model”. Alternative food networks (AFNs) are increasingly recognised as a “forerunner” and a critical component of the emerging “rural development model” in the West. Meanwhile, Marsden and Franklin [2013. Replacing neoliberalism: theoretical implications of the rise of local food movements. Local Environment, 18 (5), 636–641] pointed out that there is a “local trap” in the current conceptualisation of AFNs that overemphasises their local embeddedness and heterogeneity. This “local trap” marginalises AFNs and, therefore, hinders their potential for transforming the industrialised conventional food system. The convergence and scaling-up of fragmented AFNs have been recognised as important ways to address this marginalisation issue and thus have attracted considerable attention. However, current studies of the convergence of AFNs focus mainly on the role of food-centred organisations without recognising the role of the emerging “rural development” initiatives in the convergence of AFNs. Based on in-depth interviews with key stakeholders and analysis of secondary data, this paper uses the New Rural Reconstruction Movement (NRRM), an emerging alternative rural development movement in China, as an example to illustrate how the NRRM opens up a novel space for the convergence of AFNs. We argue that the interrelationship between AFNs and rural development is indeed reciprocal. The NRRM, following the “rural development” trajectory, functions as a hub for the convergence and scaling-up of various alternative food initiatives. Strategies for achieving convergence include constructing a “common ground” for these initiatives, establishing national alliances and organisations, sharing knowledge and exchanging personnel among them.     

Challenges in modeling detailed and complex environmental data sets: a case study modeling the excess partial pressure of fluvial $$\hbox {CO}_2$$ CO 2

Environmental and Ecological Statistics - Advances in sensor technology enable environmental monitoring programmes to record and store measurements at a high temporal resolution, enhancing the...     

Environmental factors and the epidemics of COVID-19

Environmental Science and Pollution Research -     

Does your facility have a dust problem: Methods for evaluating dust explosion hazards

The hazards of dust explosions prevailing in plants are dependent on a large variety of factors that include process parameters, such as pressure, temperature and flow characteristics, as well as equipment properties, such as geometry layout, the presence of moving elements, dust explosion characteristics and mitigating measures. A good dust explosion risk assessment is a thorough method involving the identification of all hazards, their probability of occurrence and the severity of potential consequences. The consequences of dust explosions are described as consequences for personnel and equipment, taking into account consequences of both primary and secondary events.While certain standards cover all the basic elements of explosion prevention and protection, systematic risk assessments and area classifications are obligatory in Europe, as required by EU ATEX and Seveso II directives. In the United States, NFPA 654 requires that the design of the fire and explosion safety provisions shall be based on a process hazard analysis of the facility, process, and the associated fire or explosion hazards. In this paper, we will demonstrate how applying such techniques as SCRAM (short-cut risk analysis method) can help identify potentially hazardous conditions and provide valuable assistance in reducing high-risk areas. The likelihood of a dust explosion is based on the ignition probability and the probability of flammable dust clouds arising. While all possible ignition sources are reviewed, the most important ones include open flames, mechanical sparks, hot surfaces, electric equipment, smoldering combustion (self-ignition) and electrostatic sparks and discharges. The probability of dust clouds arising is closely related to both process and dust dispersion properties.Factors determining the consequences of dust explosions include how frequently personnel are present, the equipment strength, implemented consequence-reducing measures and housekeeping, as risk assessment techniques demonstrate the importance of good housekeeping especially due to the enormous consequences of secondary dust explosions (despite their relatively low probability). The ignitibility and explosibility of the potential dust clouds also play a crucial role in determining the overall risk.Classes describe both the likelihood of dust explosions and their consequences, ranging from low probabilities and limited local damage, to high probability of occurrence and catastrophic damage. Acceptance criteria are determined based on the likelihood and consequence of the events. The risk assessment techniques also allow for choosing adequate risk reducing measures: both preventive and protective. Techniques for mitigating identified explosions risks include the following: bursting disks and quenching tubes, explosion suppression systems, explosion isolating systems, inerting techniques and temperature control. Advanced CFD tools (DESC) can be used to not only assess dust explosion hazards, but also provide valuable insight into protective measures, including suppression and venting.     

Evaluating the potential for overpressures from the ignition of an LNG vapor cloud during offloading

Ignition of natural gas (composed primarily of methane) is generally not considered to pose explosion hazards when in unconfined and low- or medium-congested areas, as most of the areas within LNG regasification facilities can typically be classified. However, as the degrees of confinement and/or congestion increase, the potential exists for the ignition of a methane cloud to result in damaging overpressures (as demonstrated by the recurring residential explosions due to natural gas leaks). Therefore, it is prudent to examine a proposed facility’s design to identify areas where vapor cloud explosions (VCEs) may cause damage, particularly if the damage may extend off site.An area of potential interest for VCEs is the dock, while an LNG carrier is being offloaded: the vessel hull provides one degree of confinement and the shoreline may provide another; some degree of congestion is provided by the dock and associated equipment.In this paper, the computational fluid dynamics (CFD) software FLACS is used to evaluate the consequences of the ignition of a flammable vapor cloud from an LNG spill during the LNG carrier offloading process. The simulations will demonstrate different approaches that can be taken to evaluate a vapor cloud explosion scenario in a partially confined and partially congested geometry.     

Change point analysis of phosphorus trends in the Illinois River (Oklahoma) demonstrates the effects of watershed management

Detecting water quality improvements following watershed management changes is complicated by flow-dependent concentrations and nonlinear or threshold responses that are difficult to detect with traditional statistical techniques. In this study, we evaluated the long-term trends (1997-2009) in total P (TP) concentrations in the Illinois River of Oklahoma, and some of its major tributaries, using flow-adjusted TP concentrations and regression tree analysis to identify specific calendar dates in which change points in P trends may have occurred. Phosphorus concentrations at all locations were strongly correlated with stream flow. Flow-adjusted TP concentrations increased at all study locations in the late 1990s, but this trend was related to a change in monitoring practices where storm flow samples were specifically targeted after 1998. Flow-adjusted TP concentrations decreased in the two Illinois River sites after 2003. This change coincided with a significant decrease in effluent TP concentrations originating with one of the largest municipal wastewater treatment facilities in the basin. Conversely, flow-adjusted TP concentrations in one tributary increased, but this stream received treated effluent from a wastewater facility where effluent TP did not decrease significantly over the study period. Results of this study demonstrate how long-term trends in stream TP concentrations are difficult to quantify without consistent long-term monitoring strategies and how flow adjustment is likely mandatory for examining these trends. Furthermore, the study demonstrates how detecting changes in long-term water quality data sets requires statistical methods capable of identifying change point and nonlinear responses.     

Soil fate of agricultural fumigants in raised-bed, plasticulture systems in the southeastern United States

Soil concentrations and degradation rates of methyl isothio-cyanate (MITC), chloropicrin (CP), 1,3-dichloropropene (1,3-D), and dimethyl disulfide (DMDS) were determined under fumigant application scenarios representative of commercial raised bed, plastic mulched vegetable production systems. Five days after application, 1,3-D, MITC, and CP were detected at concentrations up to 3.52, 0.72, and 2.45 μg cm, respectively, in the soil atmosphere when applications were made in uniformly compacted soils with a water content >200% of field capacity and covered by a virtually impermeable or metalized film. By contrast, DMDS, MITC, and CP concentrations in the soil atmosphere were 0.81, 0.02, and 0.05 μg cm, respectively, 5 d after application in soil containing undecomposed plant residue, numerous large (>3 mm) clods, and water content below field capacity and covered by low-density polyethylene. Ranked in order of impact on the persistence of fumigants in soil were soil water content (moisture), soil tilth (the physical condition of soil as related to its fitness as a planting bed), the type of plastic film used to cover fumigated beds, and soil texture. Fumigants were readily detected 13 d after application when applied in uniformly compacted soils with water contents >200% of capacity and covered by a virtually impermeable or metalized film. By contrast, 1,3-D and MITC had dissipated 5 d after application in soils with numerous large (>3 mm) clods and water contents below field capacity that were covered by low-density polyethylene. Soil degradation of CP, DMDS, and MITC were primarily attributed to biological mechanisms, whereas degradation of 1,3-D was attributed principally to abiotic factors. This study demonstrates improved soil retention of agricultural fumigants in application scenarios representative of good agricultural practices.     

Effect of uranium(VI) speciation on simultaneous microbial reduction of uranium(VI) and iron(III)

Uranium is a pollutant of concern to both human and ecosystem health. Uranium's redox state often dictates whether it will reside in the aqueous or solid phase and thus plays an integral role in the mobility of uranium within the environment. In anaerobic environments, the more oxidized and mobile form of uranium (UO2(2+) and associated species) may be reduced, directly or indirectly, by microorganisms to U(IV) with subsequent precipitation of UO. However, various factors within soils and sediments, such as U(VI) speciation and the presence of competitive electron acceptors, may limit biological reduction of U(VI). Here we examine simultaneous dissimilatory reduction of Fe(III) and U(VI) in batch systems containing dissolved uranyl acetate and ferrihydrite-coated sand. Varying amounts of calcium were added to induce changes in aqueous U(VI) speciation. The amount of uranium removed from solution during 100 h of incubation with S. putrefaciens was 77% in absence of Ca or ferrihydrite, but only 24% (with ferrihydrite) and 14% (without ferrihydrite) were removed for systems with 0.8 mM Ca. Dissimilatory reduction of Fe(III) and U(VI) proceed through different enzyme pathways within one type of organism. We quantified the rate coefficients for simultaneous dissimilatory reduction of Fe(III) and U(VI) in systems varying in Ca concecentration (0-0.8 mM). The mathematical construct, implemented with the reactive transport code MIN3P, reveals predominant factors controlling rates and extent of uranium reduction in complex geochemical systems.     

Beyond the conventional: Meeting the challenges of landscape governance within the European Landscape Convention?

Academics and policy makers seeking to deconstruct landscape face major challenges conceptually, methodologically and institutionally. The meaning(s), identity(ies) and management of landscape are controversial and contested. The European Landscape Convention provides an opportunity for action and change set within new governance agendas addressing interdisciplinarity and spatial planning. This paper critically reviews the complex web of conceptual and methodological frameworks that characterise landscape planning and management and then focuses on emerging landscape governance in Scotland within a mixed method approach involving policy analyses, semi-structured interviews and best practice case studies. Using Dower's (2008) criteria from the Articles of the European Landscape Convention, the results show that whilst some progress has been made in landscape policy and practice, largely through the actions of key individuals and champions, there are significant institutional hurdles and resource limitations to overcome. The need to mainstream positive landscape outcomes requires a significant culture change where a one-size-fits-all approach does not work.