Modeling riverine nutrient transport to the Baltic Sea: a large-scale approach

We developed for the first time a catchment model simulating simultaneously the nutrient land-sea fluxes from all 105 major watersheds within the Baltic Sea drainage area. A consistent modeling approach to all these major watersheds, i.e., a consistent handling of water fluxes (hydrological simulations) and loading functions (emission data), will facilitate a comparison of riverine nutrient transport between Baltic Sea subbasins that differ substantially. Hot spots of riverine emissions, such as from the rivers Vistula, Oder, and Daugava or from the Danish coast, can be easily demonstrated and the comparison between these hot spots, and the relatively unperturbed rivers in the northern catchments show decisionmakers where remedial actions are most effective to improve the environmental state of the Baltic Sea, and, secondly, what percentage reduction of riverine nutrient loads is possible. The relative difference between measured and simulated fluxes during the validation period was generally small. The cumulative deviation (i.e., relative bias) [Sigma(Simulated - Measured)/Sigma Measured x 100 (%)] from monitored water and nutrient fluxes amounted to +8.2% for runoff, to -2.4% for dissolved inorganic nitrogen, to +5.1% for total nitrogen, to +13% for dissolved inorganic phosphorus and to +19% for total phosphorus. Moreover, the model suggests that point sources for total phosphorus compiled by existing pollution load compilations are underestimated because of inconsistencies in calculating effluent loads from municipalities.     

Study of biological stabilization processes of cattle and poultry manure by thermogravimetric analysis and (13)C NMR

The biological stabilization process of cattle and poultry manure was studied using thermogravimetric analysis and (13)C nuclear magnetic resonance. The stabilization processes carried out were composting, anaerobic digestion and a mixed process (partly aerobic, partly anaerobic). It was observed from the analyzed samples that the biological stabilization processes reduce the volatile content of the bio-wastes and increase the degree of aromaticity. The stabilization of cattle manure by means of aerobic processes was able to further oxidize and enriched in aromatic compounds the bio-waste when compared with the digestion process. On the other hand, the stabilization of poultry manure resulted in a greater aromatization under the digestion process. Stabilized samples with a high degree of aromaticity presented a lower volatile content accompanied by a reduction in the intensity of the differential thermogravimetry peak registered under an inert atmosphere, indicative of the thermal decomposition of the organic matter. The thermal decomposition of all the analyzed materials (fresh and stabilized samples) commenced at around 200 degrees C but for the digested poultry manure, which decomposition initiated close to 250 degrees C. All stabilized samples yielded a lower degree of volatilization to that one observed in fresh samples.     

Adsorption behavior of alpha -cypermethrin on cork and activated carbon

Studies were undertaken to determine the adsorption behavior of alpha -cypermethrin [R)-alpha -cyano-3-phenoxybenzyl(1S)-cis-3-(2,2-dichlorovinyl)-2,2-dimethylcyclopropanecarboxylate, and (S)-alpha-cyano-3-phenoxybenzyl (1R)-cis-3-(2,2-dichlorovinyl)-2,2-dimethylcyclopropanecarboxylate] in solutions on granules of cork and activated carbon (GAC). The adsorption studies were carried out using a batch equilibrium technique. A gas chromatograph with an electron capture detector (GC-ECD) was used to analyze alpha -cypermethrin after solid phase extraction with C18 disks. Physical properties including real density, pore volume, surface area and pore diameter of cork were evaluated by mercury porosimetry. Characterization of cork particles showed variations thereby indicating the highly heterogeneous structure of the material. The average surface area of cork particles was lower than that of GAC. Kinetics adsorption studies allowed the determination of the equilibrium time - 24 hours for both cork (1-2 mm and 3-4 mm) and GAC. For the studied alpha -cypermethrin concentration range, GAC revealed to be a better sorbent. However, adsorption parameters for equilibrium concentrations, obtained through the Langmuir and Freundlich models, showed that granulated cork 1-2 mm have the maximum amount of adsorbed alpha-cypermethrin (q(m)) (303 microg/g); followed by GAC (186 microg/g) and cork 3-4 mm (136 microg/g). The standard deviation (SD) values, demonstrate that Freundlich model better describes the alpha -cypermethrin adsorption phenomena on GAC, while alpha -cypermethrin adsorption on cork (1-2 mm and 3-4 mm) is better described by the Langmuir. In view of the adsorption results obtained in this study it appears that granulated cork may be a better and a cheaper alternative to GAC for removing alpha -cypermethrin from water.     

Occurrence of PCDD/Fs and dioxin-like PCBs in superficial sediment of Portuguese estuaries

Superficial sediments collected from seven estuarine systems located along the Portuguese coast were analyzed for 7 polychlorinated dibenzo-p-dioxins (PCDDs), 10 polychlorinated dibenzofurans (PCDFs), and 12 dioxin-like polychlorinated biphenyls (dl-PCBs). Total PCDD/F concentration ranged from 4.6 to 464 pg g^?1 dry weight (dw), while that of dl-PCBs varied from 26.6 to 8,693 pg g^?1 dw. In general, the highest PCDD/F and dl-PCB concentrations were associated with densely populated and industrially impacted areas. Additionally, PCDD/F revealed a predominance of octachlorodibenzodioxin (OCDD) to total PCDD/Fs, while PCB 118 was the major contributor to total dl-PCBs. This study provided a global perspective of the contamination status of Portuguese estuaries by dioxin-like compounds and allowed a comparison between the investigated systems and other systems worldwide. PCDD/F and dl-PCB levels found in the collected sediments were lower than those of highly impacted areas from different parts of the globe. Nevertheless, comparison with guidelines and quality standards from other countries indicated that some Portuguese estuarine areas with a high industrialization level present PCDD/F and dl-PCB concentrations in superficial sediment that may constitute a risk to aquatic organisms.     

Risk assessment of soils contaminated by mercury mining, Northern Spain

Analytical results of soil samples taken in three different mercury mining sites in Northern Spain are studied to assess the potential adverse health effects of the exposure to trace elements associated with the mining process. Doses contacted through ingestion and inhalation and the dose absorbed through the skin were calculated using USEPA's exposure parameters and the US Department of Energy's toxicity values. The results of the risk assessment indicate that the highest risk is associated with ingestion of soil particles and that the trace element of major concern is arsenic, the exposure to which results in a high cancer risk value for all the sites ranging from 3.3 × 10(-5) to 3.6 × 10(-3), well above the 1 × 10(-5) probability level deemed unacceptable by most regulatory agencies. Regarding non-cancer effects, exposure to polluted soils yields an aggregate hazard index above the threshold value of 1 for all three sites, with As and Hg as the main contributors. Risk assessment has proven to be a very useful tool to identify the contaminants and exposure pathways of most concern in the soils from metal mining sites, as well as to categorize them in terms of action priority to ensure fitness for use.     

The contribution of non‐timber forest products towards sustainable rural development: The case of Candelilla wax from the Chihuahuan Desert in Mexico

The promotion of development projects based on the commercialization of non‐timber forest products has increased in recent decades, showing a positive contribution to rural development; yet it has led to controversial approaches in resource preservation. This paper examines the case of Candelilla wax from the Chihuahuan Desert in northern Mexico, identifying its potential contribution to poverty alleviation in marginal areas, and its unique opportunity to access potential markets of a wide variety of industries all around the world. In this paper, the authors base their analysis on three main aspects: social, economic and environmental. Potential benefits that could be obtained from the collaboration of private institutions, development organizations, policymakers and rural producers through integrated rural development projects are featured.     

In vivo assessment of the biomechanical properties of the uterine cervix in pregnancy

Measuring the stiffness of the cervix might be useful in the prediction of preterm delivery or successful induction of labor. For that purpose, a variety of methods for quantitative determination of physical properties of the pregnant cervix have been developed. Herein, we review studies on the clinical application of these new techniques. They are based on the quantification of mechanical, optical, or electrical properties associated with increased hydration and loss of organization in collagen structure. Quasi-static elastography determines relative values of stiffness; hence, it can identify differences in deformability. Quasi-static elastography unfortunately cannot quantify in absolute terms the stiffness of the cervix. Also, the current clinical studies did not demonstrate the ability to predict the time point of delivery. In contrast, measurement of maximum deformability of the cervix (e.g. quantified with the cervical consistency index) provided meaningful results, showing an increase in compliance with gestational age. These findings are consistent with aspiration measurements on the pregnant ectocervix, indicating a progressive decrease of stiffness along gestation. Cervical consistency index and aspiration measurements therefore represent promising techniques for quantitative assessment of the biomechanical properties of the cervix. © 2013 John Wiley & Sons, Ltd.