Strontium migration in a crystalline medium: effects of the presence of bentonite colloids

The effects of bentonite colloids on strontium migration in fractured crystalline medium were investigated. We analyzed first the transport behaviour of bentonite colloids alone at different flow rates; then we compared the transport behaviour of strontium as solute and of strontium previously adsorbed onto stable bentonite colloids at a water velocity of approximately 7.1·10(-6)m/s-224m/yr. Experiments with bentonite colloids alone showed that - at the lowest water flow rate used in our experiments (7.1·10(-6)m/s) - approximately 70% of the initially injected colloids were retained in the fracture. Nevertheless, the mobile colloidal fraction, moved through the fracture without retardation, at any flow rate. Bentonite colloids deposited over the fracture surface were identified during post-mortem analyses. The breakthrough curve of strontium as a solute, presented a retardation factor, R(f)~6, in agreement with its sorption onto the granite fracture surface. The breakthrough curve of strontium in the presence of bentonite colloids was much more complex, suggesting additional contributions of colloids to strontium transport. A very small fraction of strontium adsorbed on mobile colloids moved un-retarded (R(f)=1) and this fraction was much lower than the expected, considering the quantity of strontium initially adsorbed onto colloids (90%). This behaviour suggests the hypothesis of strontium sorption reversibility from colloids. On the other hand, bentonite colloids retained within the granite fracture played a major role, contributing to a slower strontium transport in comparison with strontium as a solute. This was shown by a clear peak in the breakthrough curve corresponding to a retardation factor of approximately 20.     

Heavy metal accumulation in Halimione portulacoides: intra- and extra-cellular metal binding sites

Salt marsh plants can sequestrate and inherently tolerate high metal concentrations found in salt marsh sediments. This work intended to understand the Halimione portulacoides (L.) Aellen strategies to prevent metal toxicity, by investigating the metal location in different plant organs and in the cell. A sequential extraction was performed on leaves, stems and roots of H. portulacoides in order to determine and compare the metal (Zn, Pb, Co, Cd, Ni and Cu) concentration in several fractions of the plant material (ethanolic, aqueous, proteic, pectic, polissacaridic, lenhinic and cellulosic). This study shows that all plant organs of H. portulacoides mostly retain metals in the cell wall (65% is the average for all studied metals stored in the root cell wall, 55% in the stems and 53% in the leaves), and the metal content in the intracellular compartment is much lower (21% in roots, 25% in stems and 32% in leaves). High levels of heavy metal in the sedimentary environment do not cause toxicity to H. portulacoides, because H. portulacoides immobilizes them in different cell compartments (cell wall+proteic fraction+intracellular) outside key metabolic sites.     

Climate change in Mediterranean mountains during the 21st century

Mediterranean mountain biomes are considered endangered due to climate change that affects directly or indirectly different key features (biodiversity, snow cover, glaciers, run-off processes, and water availability). Here, we provide an assessment of temperature, precipitation, and spring precipitation changes in Mediterranean mountains under different emission scenarios (Special Report on Emission Scenarios) and Atmosphere-Ocean-Coupled General Circulation Models for two periods: 2055 (2040-2069 period) and 2085 (2070-2099). Finally, the future climate trends projected for Mediterranean mountains are compared with those trends projected for non-Mediterranean European mountain ranges. The range of projected warming varies between +1.4 degrees C and 5.1 degrees C for 2055 (+1.6 degrees C and +8.3 degrees C for 2085). Climate models also project a reduction of precipitation, mainly during spring (-17% under Alfi and -4.8% under B1 for 2085). On the contrary, non-Mediterranean European mountains will not experience a reduction of annual and spring precipitation. Implications of predicted climate change for both human and physical features are coupled in an integrated framework to gain a broad perspective on future trends and their consequences.     

Dividivi tannins: an ecological product for water-based drilling fluids

Modified tannins are used as deflocculant additives in the formulation of water-based drilling fluids (WBDF) for drilling operations in any scenario. Due to their high heavy metals content, these additives are toxic and hazardous for any environmental scenario. Deflocculant efficiency of unmodified tannins (UDT) extracted from fruit pods of “dividivi” (Caesalpinia coriaria) as an additive for WBDF was assessed. Raw materials for UDT elaboration come from the rural and sustainable exploitation of natural occurring dividivi trees, growing in dry tropical forests in Anzoátegui state (Orinoco Oil Belt, eastern Venezuela). The tannins extract, in the form of dividivi fruit powder, contains 47.0 % of total tannins (hydrolyzable tannins plus condensed tannins), of which 67.4 % corresponds to hydrolyzable tannins. Dividivi tannins in WBDF showed nine (9) times deflocculant efficiency than heavy metals commercial modified tannins. Moreover, commercial modified tannins do not improve their deflocculant efficiency with increased tannin content. Ecotoxicological studies were carried out for WBDF formulations with UDT, using freshwater microalgae Scenedesmus dimorphus as chronic toxicity bioindicator. Toxicity bioassays performed with these microalgae did not show significant effects on its population growth. The EC₅₀ values resulted in over 100,000 mg L^?1, and these formulations were therefore considered non-toxic. Values of LC₅₀ obtained this time with Poecilia reticulata, as acute toxicity bioindicator are around 100,000 mg L^?1, with no significant effects on population mortality. Thus, WBDF formulated with UDT can be considered non-toxic formulations for populations of this freshwater fish. From the social perspective, the use of UDT in WBDF fosters organized communities economical activities based on the maintenance of a sustainable supply chain for processing fruits in a quantity enough to obtain three thousand seven hundred fifty kilograms (3750 Kg). The UDT so obtained was used as deflocculant in four (4) oil wells producing excellent performance and relevant savings compared with commercial modified tannin.     

Real-world emissions of in-use off-road vehicles in Mexico

Off-road vehicles used in construction and agricultural activities can contribute substantially to emissions of gaseous pollutants and can be a major source of submicrometer carbonaceous particles in many parts of the world. However, there have been relatively few efforts in quantifying the emission factors (EFs) and for estimating the potential emission reduction benefits using emission control technologies for these vehicles. This study characterized the black carbon (BC) component of particulate matter and NOx, CO, and CO₂ EFs of selected diesel-powered off-road mobile sources in Mexico under real-world operating conditions using on-board portable emissions measurements systems (PEMS). The vehicles sampled included two backhoes, one tractor, a crane, an excavator, two front loaders, two bulldozers, an air compressor, and a power generator used in the construction and agricultural activities. For a selected number of these vehicles the emissions were further characterized with wall-flow diesel particle filters (DPFs) and partial-flow DPFs (p-DPFs) installed. Fuel-based EFs presented less variability than time-based emission rates, particularly for the BC. Average baseline EFs in working conditions for BC, NOx, and CO ranged from 0.04 to 5.7, from 12.6 to 81.8, and from 7.9 to 285.7 g/kg-fuel, respectively, and a high dependency by operation mode and by vehicle type was observed. Measurement-base frequency distributions of EFs by operation mode are proposed as an alternative method for characterizing the variability of off-road vehicles emissions under real-world conditions. Mass-based reductions for black carbon EFs were substantially large (above 99%) when DPFs were installed and the vehicles were idling, and the reductions were moderate (in the 20–60% range) for p-DPFs in working operating conditions. The observed high variability in measured EFs also indicates the need for detailed vehicle operation data for accurately estimating emissions from off-road vehicles in emissions inventories.

Implications: Measurements of off-road vehicles used in construction and agricultural activities in Mexico using on-board portable emissions measurements systems (PEMS) showed that these vehicles can be major sources of black carbon and NO_X. Emission factors varied significantly under real-world operating conditions, suggesting the need for detailed vehicle operation data for accurately estimating emissions inventories. Tests conducted in a selected number of sampled vehicles indicated that diesel particle filters (DPFs) are an effective technology for control of diesel particulate emissions and can provide potentially large emissions reduction in Mexico if widely implemented.     

Mercury transfer from soil to olive trees. A comparison of three different contaminated sites

Mercury contents in soil and olive tree leaves have been studied in 69 plots around three different source areas of this element in Spain: Almadén (Ciudad Real), Flix (Tarragona) and Jódar (Jaén). Almadén was the world’s largest cinnabar (HgS) mining district and was active until 2003, Flix is the oldest Spanish chlor-alkali plant (CAP) and has been active from 1898 to the present day and Jódar is a decommissioned CAP that was active for 14 years (1977–1991). Total mercury contents have been measured by high-frequency modulation atomic absorption spectrometry with Zeeman effect (ZAAS-HFM) in the soils and olive tree leaves from the three studied areas. The average soil contents range from 182 μg kg^?1 in Flix to 23,488 μg kg^?1 in Almadén, while the average leaf content ranges from 161 μg kg^?1 in Jódar to 1213 μg kg^?1 in Almadén. Despite the wide range of data, a relationship between soil–leaf contents has been identified: in Almadén and Jódar, multiplicative (bilogarithmic) models show significant correlations (R?=?0.769 and R?=?0.484, respectively). Significant correlations were not identified between soil and leaf contents in Flix. The continuous activity of the Flix CAP, which remains open today, can explain the different uptake patterns for mercury, which is mainly atmospheric in origin, in comparison to the other two sites, where activity ceased more than 10 years ago and only soil uptake patterns based on the Michaelis–Menten enzymatic model curve are observed.     

Spatially valid data of atmospheric deposition of heavy metals and nitrogen derived by moss surveys for pollution risk assessments of ecosystems

For analysing element input into ecosystems and associated risks due to atmospheric deposition, element concentrations in moss provide complementary and time-integrated data at high spatial resolution every 5 years since 1990. The paper reviews (1) minimum sample sizes needed for reliable, statistical estimation of mean values at four different spatial scales (European and national level as well as landscape-specific level covering Europe and single countries); (2) trends of heavy metal (HM) and nitrogen (N) concentrations in moss in Europe (1990–2010); (3) correlations between concentrations of HM in moss and soil specimens collected across Norway (1990–2010); and (4) canopy drip-induced site-specific variation of N concentration in moss sampled in seven European countries (1990–2013). While the minimum sample sizes on the European and national level were achieved without exception, for some ecological land classes and elements, the coverage with sampling sites should be improved. The decline in emission and subsequent atmospheric deposition of HM across Europe has resulted in decreasing HM concentrations in moss between 1990 and 2010. In contrast, hardly any changes were observed for N in moss between 2005, when N was included into the survey for the first time, and 2010. In Norway, both, the moss and the soil survey data sets, were correlated, indicating a decrease of HM concentrations in moss and soil. At the site level, the average N deposition inside of forests was almost three times higher than the average N deposition outside of forests.     

Newborns and low to moderate prenatal environmental lead exposure: might fathers be the key?

This study is part of the BioMadrid Project, a bio-monitoring study designed to assess pollutants in the environment surrounding children born in the Madrid region. Our aim in this report is to evaluate the association between prenatal lead exposure and fetal development using three biological samples (maternal and paternal blood lead at around 34 weeks of gestation as well as cord blood lead levels), three biomarkers of effect in cord blood peripheral lymphocytes (micronucleus in binucleated cells, nucleoplasmic bridges, and nuclear buds), and different anthropometrical characteristics at birth. Maternal and cord blood lead were not associated with newborn measurements or genotoxicity biomarkers. In contrast, increases in father blood lead were coupled with lower weight (mean difference (MD), ?110.8 g; 95 % confidence intervals (95%CI), ?235.6 to 6.00; p?<?0.10) and shorter abdominal (MD, ?0.81 cm; 95%CI, ?1.64 to 0.00; p?<?0.05) and cephalic (MD, ?0.32 cm; 95%CI, ?0.65 to 0.00; p?<?0.05) circumferences at birth as well as with the presence of nucleoplasmic bridges (odds ratio, 1.03; 95%CI, 1.00 to 1.06; p?<?0.05) and nuclear buds (odds ratio, 1.02; 95%CI, 0.99 to 1.04; p?<?0.10). These associations were mainly confined to female babies, in whom paternal lead was also inversely associated with length. Our results support the hypothesis that paternal lead exposure may be affecting the development of newborns.     

Bacterial Cellulose from Simple and Low Cost Production Media by Gluconacetobacter xylinus

Bacterial cellulose pellicles were produced by Gluconacetobacter xylinus using non conventional low-cost carbon sources, such as glycerol remaining from biodiesel production and grape bagasse, a residue of wine production. The carbon sources assayed showed their suitability for microbial cellulose production, with relatively high production values such as 10.0 g/l for the culture medium with glycerol from biodiesel as carbon source and corn steep liquor as nitrogen source; and 8.0 g/l for the culture medium containing grape bagasse and corn steep liquor. Glucose, commercial glycerol and cane molasses were also assayed as carbon sources for comparison. The bacterial celluloses produced were characterized by means of scanning electron microscopy, X-ray diffraction, Fourier transform infrared spectroscopy and thermogravimetric analysis. Morphological analysis showed that bacterial cellulose microfibrils produced from the non-conventional media used were several micrometers long and had rectangular cross-sections with widths and thicknesses in the range of 35–70 and 13–24 nm, respectively. X-ray patterns showed crystallinity levels in the range of 74–79 % (area method), whereas both X-ray patterns and infrared spectroscopy evidenced the presence of peaks characteristic of Cellulose I polymorph. Besides thermal properties were similar to those found for the pellicle obtained from glucose. The study performed showed the suitability of using wine residues or glycerol remaining from increasing biodiesel production as cheap carbon sources for production of bacterial cellulose microfibrils, with similar characteristics as those obtained by use of more expensive carbon sources such as glucose or commercial glycerol. On the other hand, the low cost nitrogen sources used (corn steep liquor or diammonium phosphate) also contributed to the economy of the bioprocess.     

The use of a lacertid lizard as a model for reptile ecotoxicology studies: part 2--biomarkers of exposure and toxicity among pesticide exposed lizards

As part of a wider study examining the impacts of corn pesticides on lacertid lizards in north-western Portugal, we examined various physiological, biochemical, and histological biomarkers of exposure and effect among field populations of Podarcis bocagei. Biomarkers included body condition index, standard metabolic rate, locomotor performance, parasitization, glutathione oxidative pathways and related enzyme activity, lipid peroxidation and liver and testis histology. Few of the various biomarkers investigated provided statistically significant evidence of toxic effect. However, using a weight of evidence approach, we conclude that pesticides are affecting lizards living in the vicinity of pesticide exposed corn agriculture sites. Lizards from these locations present a profile of animals under metabolic stress with reduced condition indices, increased standard metabolic rate, lower incidence of hepatocyte vacuolation, altered iron metabolism, increased activation of GSH oxidation pathways, and even increased prevalence of hemoparasites.