An evaluation of four key methods for monitoring household waste prevention campaigns in the UK

Household waste prevention in England has been recognised in national strategy as a key component for future sustainable practice. To support the policy agenda, the Department of Environment, Food and Rural Affairs (Defra) in England has funded an extensive programme of fundamental research in the area. The specific research aim reported on here, in this Defra funded project, was to trial and assess methods for monitoring and evaluating approaches detailed in the National Resource and Waste Forum (NRWF)’s Household Waste Prevention Toolkit. The methods that formed the basis for the four research Objectives for the project were: using pilot and control areas (core Objective), tracking waste arisings, measuring specific activities and declared awareness and behaviour surveys. A primary objective of this research was to quantify the direct waste tonnage impacts of implementing a targeted household waste campaign in Dorset County, UK. A key performance indicator chosen for this assessment was the weight of waste collected at the kerbside from households. In an area where a waste prevention campaign is well planned and implemented then reductions in household waste arisings in pilot areas can be in the region of 2% per annum. This method for monitoring can be used, in the hands of an expert project team, to communicate to the public the direct benefits of waste prevention. It was found that there are a wide range of factors that need to be taken into account in the UK, and that these had hitherto been given little prominence, such as careful matching of pilot and control areas – this proved problematical in this research. However, a range of techniques used to support the methods, e.g. doorstepping surveys and focus groups could not show clear attributable waste prevention impacts but their findings could be used to direct new future messages to the public. The most successful and measurable campaign activities that were revealed by evaluation were: mail preference registrations, Home composting and doorstepping. An expert evaluation of all major methods found that no clear preference was revealed as to which were the most useful. None of the methods were judged very poor neither very good, all had major issues about their use. Tracking waste arisings and focus groups were assessed to be the best techniques in terms of input effort to output value. It is likely that waste prevention teams for household waste will need very careful training in the cost-effective use of the NRWF Toolkit before they are competent to apply it to a given place; the issues are more complex than were first thought.     

Introducing urine-enriched biochar-based fertilizer for vegetable production: acceptability and results from rural Bangladesh

Improved agricultural practices that increase yields and preserve soils are critical to addressing food insecurity and undernutrition among smallholder farmer families. Urine-enriched biochar has been shown to be an accessible and effective fertilization option in various subtropical countries; however, it is new to Bangladesh. To better understand attitudes and experiences preparing and using urine-enriched biochar fertilizer, mixed-methods research was undertaken among smallholder farmers in northeastern Bangladesh in 2016/2017. In-depth interviews were conducted with 25 respondents who had compared the production of crops grown with biochar-based fertilizer to usual practice. In addition, in areas where trainings on biochar-based fertilization had been offered, 845 farmers were asked about their experience through a quantitative survey. Interview results indicated that cow urine-enriched biochar was favored over human urine because cow urine was perceived as clean and socially acceptable, whereas human urine was considered impure and disgusting. Respondents praised biochar-based fertilizer because it increased yields, cost little, was convenient to prepare with readily available natural materials, produced tastier crops, and allowed families to share their larger yields which in turn enhanced social and financial capital. Comparative field trials indicated a 60% yield benefit in both cabbage and kohlrabi crops. Challenges included uneven access to ingredients, with some respondents having difficulty procuring cow urine and biomass feedstock. The low social, health, and financial risk of adoption and the perceived benefits motivated farmers to produce and apply biochar-based fertilizer in their gardens, demonstrating strong potential for scale-up of this technology in Bangladesh.

     

Macrofaunal recolonisation following the intertidal placement of fine-grained dredged material

Dredged material is increasingly being regarded as a potential resource, and one of its many uses is to create and/or improve intertidal habitats (i.e. beneficial use). However, uncertainties over the longer-term environmental consequences of such schemes have, to date, limited the practice to small-scale applications in UK waters. This paper studies the macrofaunal recolonisation of fine-grained dredged material recharged concurrently at four adjacent recharge areas along the south-east coast of the UK in order to facilitate predictions regarding the recolonisation of comparable schemes and, thereby, to promote effective environmental management. During the 2-year study period, the four recharge areas were distinctly different in terms of their environmental characteristics, primarily wave exposure and bed level. These conditions resulted in different macrofaunal recolonisation rates and community structures. While the low-level, wave-sheltered area experienced rapid recolonisation, the process was delayed until 12 months post-recharge at the relatively wave-exposed areas. Bed level differences resulted in distinctly different communities in wave-sheltered areas but not under wave-exposed conditions. While we are unable to separate the effects of individual environmental variables on recolonisation, these results provide general conclusions as to the importance of environmental conditions on resulting macrofaunal communities.     

An Analysis of Young Driver Crash Types and the Associated Lifetime Care Cost in Victoria,Australia

Objective: The elevated crash involvement rate of young drivers is well documented. Given the higher crash risk of young drivers and the need for innovative policy and programs, it remains important to fully understand the type of crashes young drivers are involved in, and knowledge of the lifetime care cost of crashes can support effective policy development. The aim of this article is to document the number and type of young driver crashes, as well as the associated lifetime care cost over a 9-year period (2005–2013) in Victoria, Australia.

Methods: In Victoria, Australia, the Transport Accident Commission (TAC) has legislated responsibility for road safety and the care of persons injured in road crashes, irrespective of fault. TAC claims data for the period 2005–2013 were used to document the number and type of young driver crashes. Lifetime care costs (past and future payment liabilities) were calculated by Taylor Fry actuarial consultancy. License and population data were used to define the crash involvement rate of young drivers.

Results: Over the 9-year period, 16,817 claims were lodged to the TAC by drivers 18–25 years of age following a crash. There were 646 fewer drivers aged 18–25 killed and injured in 2013, compared to 2005, representing an unadjusted change of ?28.7% (?29.8% males; ?28.4% females). The total lifetime care cost of young drivers killed and injured in Victoria for the period 2005–2013 was estimated to be AU$634 million (US$493 million). Differences between males and females, single- and multivehicle crashes, and fatalities and injuries were found to be statistically significant. Run-off-road crashes and crashes from opposing direction were overrepresented in the lifetime care costs for young driver claimants. Twenty-eight injured drivers were classified as high-severity claims. These 28 claimants require additional long-term care, which was estimated to be AU$219 million; of these 28, 24 were male (85.7%). The long-term care costs for these 28 drivers (0.16%) accounts for 34.5% of the total lifetime care cost of all 18- to 25-year-old injured drivers.

Conclusions: By using no-fault lifetime care costs that account for medical and like expenses, rehabilitation, and social reintegration costs, a more accurate understanding of the cost of young driver crashes can be determined. Application of these costs to specific crash types highlights new priorities and opportunities for developing programs to reduce young driver crashes.     

Accuracy Assessment of NOAA Gridded Daily Reference Evapotranspiration for the Texas High Plains

The National Oceanic and Atmospheric Administration (NOAA) provides daily reference evapotranspiration (ET_ref) maps for the contiguous United States using climatic data from North American Land Data Assimilation System (NLDAS). This data provides large‐scale spatial representation of ET_ref, which is essential for regional scale water resources management. Data used in the development of NOAA daily ET_ref maps are derived from observations over surfaces that are different from short (grass — ET_os) or tall (alfalfa — ET_rs) reference crops, often in nonagricultural settings, which carries an unknown discrepancy between assumed and actual conditions. In this study, NOAA daily ET_os and ET_rs maps were evaluated for accuracy, using observed data from the Texas High Plains Evapotranspiration (TXHPET) network. Daily ET_os, ET_rs and the climatic data (air temperature, wind speed, and solar radiation) used for calculating ET_ref were extracted from the NOAA maps for TXHPET locations and compared against ground measurements on reference grass surfaces. NOAA ET_ref maps generally overestimated the TXHPET observations (1.4 and 2.2 mm/day ET_os and ET_rs, respectively), which may be attributed to errors in the NLDAS modeled air temperature and wind speed, to which reference ET_ref is most sensitive. Therefore, a bias correction to NLDAS modeled air temperature and wind speed data, or adjustment to the resulting NOAA ET_ref, may be needed to improve the accuracy of NOAA ET_ref maps.     

Microbial diversity and dynamics during methane production from municipal solid waste

The objectives of this study were to characterize development of bacterial and archaeal populations during biodegradation of municipal solid waste (MSW) and to link specific methanogens to methane generation. Experiments were conducted in three 0.61-m-diameter by 0.90-m-tall laboratory reactors to simulate MSW bioreactor landfills. Pyrosequencing of 16S rRNA genes was used to characterize microbial communities in both leachate and solid waste. Microbial assemblages in effluent leachate were similar between reactors during peak methane generation. Specific groups within the Bacteroidetes and Thermatogae phyla were present in all samples and were particularly abundant during peak methane generation. Microbial communities were not similar in leachate and solid fractions assayed at the end of reactor operation; solid waste contained a more abundant bacterial community of cellulose-degrading organisms (e.g., Firmicutes). Specific methanogen populations were assessed using quantitative polymerase chain reaction. Methanomicrobiales, Methanosarcinaceae, and Methanobacteriales were the predominant methanogens in all reactors, with Methanomicrobiales consistently the most abundant. Methanogen growth phases coincided with accelerated methane production, and cumulative methane yield increased with increasing total methanogen abundance. The difference in methanogen populations and corresponding methane yield is attributed to different initial cellulose and hemicellulose contents of the MSW. Higher initial cellulose and hemicellulose contents supported growth of larger methanogen populations that resulted in higher methane yield.