Implications of climate change for the stomatal flux of ozone: a case study for winter wheat

Climate change factors such as elevated CO2 concentrations, warming and changes in precipitation affect the stomatal flux of ozone (O3) into leaves directly or indirectly by altering the stomatal conductance, atmospheric O3 concentrations, frequency and extent of pollution episodes and length of the growing season. Results of a case study for winter wheat indicate that in a future climate the exceedance of the flux-based critical level of O3 might be reduced across Europe, even when taking into account an increase in tropospheric background O3 concentration. In contrast, the exceedance of the concentration-based critical level of O3 will increase with the projected increase in tropospheric background O3 concentration. The influence of climate change should be considered when predicting the future effects of O3 on vegetation. There is a clear need for multi-factorial, open-air experiments to provide more realistic information for O3 flux-effect modelling in a future climate.     

Investigations on the effect of chlorine in lubricating oil and the presence of a diesel oxidation catalyst on PCDD/F releases from an internal combustion engine

This paper reports on an intensive study into releases of polychlorinated dibenzo-p-dioxins (PCDD), polychlorinated furans (PCDF) and polychlorinated biphenyls (PCB) from a diesel engine and the analysis of PCDD/F and PCB in crankcase lubricating oil. Experimental conditions were set and carefully controlled in order to maximize the possible impact of, and our ability to measure the effect of, changes in the levels of chlorine in the lubricant. Emissions to air were measured using modified EPA methods following the principles of the European EN 1948 standards. A series of 40 experimental runs were completed using three reference lubricants formulated to have three levels of chlorine present as a residual component (at levels of 12, 131 and 259 mg kg(-1) or ppm). The engine was run with and without the diesel oxidation catalyst. All lubricants were realistic oils and the use of unrealistic additives or doping of components - particularly chlorine - in the fuel and lubricant was carefully avoided. Analysis of fuel and lubricant (before and after testing) samples required strenuous attention to achieve acceptable recoveries and showed non-detectable levels of PCB and PCDD/F at a detection limit of around 1.5 ng I-TEQ kg(-1) (ppt), indistinguishable from the laboratory blank. The testing demonstrated the need for extreme care to be taken in developing measurement methods that are sufficiently sensitive for measuring chlorine content of fluids and PCDD/F in oils, the latter being particularly challenging. Mean emissions of PCDD/F with the diesel oxidation catalyst in place were 23 pg I-TEQ l(-1) of fuel and with the diesel oxidation catalyst removed 97 pg I-TEQ l(-1) of fuel. The results of this testing showed that the emissions of PCDD/F were greatly reduced by the presence of a diesel oxidation catalyst in the exhaust, a finding that has not been explicitly tested in previous work. They also show that emissions from the engine were not controlled by the level of chlorine in the lubricant and that emissions did not change in response to a much greater step change in the total chlorine entering the combustion chamber due to a change in the level of chlorine in the fuel. Emissions when the engine was configured with a diesel oxidation catalyst showed a consistent pattern that appears to be unique in the experience of the authors.     

Remediation of metal contaminated soil with mineral-amended composts

This study examined the use of two composts derived from green waste and sewage sludge, amended with minerals (clinoptilolite or bentonite), for the remediation of metal-contaminated brownfield sites to transform them into greenspace. Soils contaminated with high or low levels of metals were mixed with the mineral-enhanced composts at different ratios and assessed by leaching tests, biomass production and metal accumulation of ryegrass (Lolium perenne L.). The results showed that the green waste compost reduced the leaching of Cd and Zn up to 48% whereas the composted sewage sludge doubled the leachate concentration of Zn. However, the same soil amended with composted sewage sludge showed an efficient reduction in plant concentrations of Cd, Cu, Pb or Zn by up to 80%. The results suggest that metal immobilisation and bioavailability are governed by the formation of complexes between the metals and organic matter. The amendment with minerals had only limited effects.     

Dissipation of sulfamethoxazole and trimethoprim antibiotics from manure-amended soils

In this study, the dissipation of two antibiotics, sulfamethoxazole (SMX) and trimethoprim (TRM), in three soils under both aerobic and anaerobic conditions are evaluated. Under aerobic conditions, SMX dissipated rapidly through biodegradation but TRM was more persistent. Within the first 20 days in biologically active soils, >50% of the SMX was lost from the clay loam and loamy sand soils, and >80% loss was noted in the loam soil. Anaerobic dissipation of both compounds was more rapid than aerobic dissipation. The addition of manure to the soil only slightly increased the initial dissipation rate of the two compounds. Little effect was found on glucose mineralisation in soil following the addition of SMX and TRM, even as mixtures at high concentrations.     

Naturally-assisted metal phytoextraction by Brassica carinata: Role ofroot exudates

Due to relatively high chelant dosages and potential environmental risks it is necessary to explore different approaches in the remediation of metal-contaminated soils. The present study focussed on the removal of metals (As, Cd, Cu, Pb and Zn) from a multiple metal-contaminated soil by growing Brassica carinata plants in succession to spontaneous metallicolous populations of Pinus pinaster, Plantago lanceolata and Silene paradoxa. The results showed that the growth of the metallicolous populations increased the extractable metal levels in the soil, which resulted in a higher accumulation of metals in the above-ground parts of B. carinata. Root exudates of the three metallicolous species were analysed to elucidate their possible role in the enhanced metal availability. The presence of metals stimulated the exudation of organic and phenolic acids as well as flavonoids. It was suggested that root exudates played an important role in solubilising metals in soil and in favouring their uptake by roots.     

Cover Image

Over recent years, technical developments resulting in the feasibility of fetal cardiovascular magnetic resonance (CMR) have provided a new diagnostic tool for studying the human fetal heart and circulation. During the same period, we have witnessed the arrival of several minimally invasive fetal cardiac interventions (FCI) as a possible form of treatment in selected congenital heart diseases (CHDs). The role of fetal CMR in the planning and monitoring of FCI is not yet clear. Indeed, high-quality fetal CMR is not available or routinely offered at most centers caring for patients with prenatally detected CHD. However, in theory, fetal CMR could have much to offer in the setting of FCI by providing complementary anatomic and physiologic information relating to the specific intervention under consideration. Similarly, fetal CMR may be useful as an alternative imaging modality when ultrasound is hampered by technical limitations, for example, in the setting of oligohydramnios and in late gestation. In this review, we summarize current experience of the use of fetal CMR in the diagnosis and monitoring of fetuses with cardiopathies in the setting of a range of invasive in utero cardiac and vascular interventions and medical treatments and speculate about future directions for this versatile imaging medium.     

An assessment of benthic condition in several small watersheds of the Chesapeake Bay, USA

We examined benthic condition in three small watersheds in the Chesapeake Bay. Characterization of benthic condition was based on the combined measurements of benthic fauna, sediment toxicity, and sediment contaminant loads. Significant differences between watersheds were detected for sediment contaminant concentrations and water quality. The intensity of benthic impairment was greatest in the river surrounded by the most developed watershed. Spatial patterns of benthic condition were detected within all three watersheds. In contrast to current, intense focus on nutrient pollution in the Chesapeake Bay, qualitative comparison of our findings to land-use patterns supports findings of other studies that suggest benthic condition in tributaries of the Chesapeake Bay may more closely relate to urbanization than agricultural land uses.     

Twenty Years of New Zealand’s National Rivers Water Quality Network: Benefits of Careful Design and Consistent Operation1

Davies‐Colley, Robert J., David G. Smith, Robert C. Ward, Graham G. Bryers, Graham B. McBride, John M. Quinn, and Mike R. Scarsbrook, 2011. Twenty Years of New Zealand’s National Rivers Water Quality Network: Benefits of Careful Design and Consistent Operation. Journal of the American Water Resources Association (JAWRA) 47(4):750‐771. DOI: 10.1111/j.1752‐1688.2011.00554.x Abstract: This paper reviews New Zealand’s National Rivers Water Quality Network (NRWQN), which is now in its third decade of monitoring. The NRWQN is noteworthy for being operationally stable throughout its history, and the resulting consistency is increasingly valuable for detecting water quality trends and for “anchoring” temporary special purpose monitoring campaigns. The NRWQN was carefully designed following considerable effort to learn from monitoring experiences elsewhere. Monthly visits are made to 77 sites (all near hydrometric stations) on 35 river systems that cumulatively drain about one half of the national landscape. “Core” (routinely measured) variables are: conductivity, pH, temperature, dissolved oxygen, visual clarity, turbidity, colored dissolved organic matter, fecal indicator bacteria, and different forms of nitrogen and phosphorus (italics indicate field measurements). Associated benthic biological monitoring comprises monthly visual assessment of periphyton and annual sampling for macro‐invertebrates. We overview the conception, design, initiation, and operational history of the NRWQN, and highlight the diverse applications of its datasets including numerous scientific applications, national‐scale modeling of material fluxes, and state‐of‐environment reporting and practical water management at both regional and national scale. The qualified success of the NRWQN can probably be attributed to careful (and parsimonious) design and consistent operation.     

Flood management: prediction of microbial contamination in large-scale floods in urban environments

With a changing climate and increased urbanisation, the occurrence and the impact of flooding is expected to increase significantly. Floods can bring pathogens into homes and cause lingering damp and microbial growth in buildings, with the level of growth and persistence dependent on the volume and chemical and biological content of the flood water, the properties of the contaminating microbes, and the surrounding environmental conditions, including the restoration time and methods, the heat and moisture transport properties of the envelope design, and the ability of the construction material to sustain the microbial growth. The public health risk will depend on the interaction of these complex processes and the vulnerability and susceptibility of occupants in the affected areas. After the 2007 floods in the UK, the Pitt review noted that there is lack of relevant scientific evidence and consistency with regard to the management and treatment of flooded homes, which not only put the local population at risk but also caused unnecessary delays in the restoration effort. Understanding the drying behaviour of flooded buildings in the UK building stock under different scenarios, and the ability of microbial contaminants to grow, persist, and produce toxins within these buildings can help inform recovery efforts. To contribute to future flood management, this paper proposes the use of building simulations and biological models to predict the risk of microbial contamination in typical UK buildings. We review the state of the art with regard to biological contamination following flooding, relevant building simulation, simulation-linked microbial modelling, and current practical considerations in flood remediation. Using the city of London as an example, a methodology is proposed that uses GIS as a platform to integrate drying models and microbial risk models with the local building stock and flood models. The integrated tool will help local governments, health authorities, insurance companies and residents to better understand, prepare for and manage a large-scale flood in urban environments.