Cosolvent flushing for the remediation of PAHs from former manufactured gas plants

Cosolvent flushing is a technique that has been proposed for the removal of hydrophobic organic contaminants in the subsurface. Cosolvents have been shown to dramatically increase the solubility of such compounds compared to the aqueous solubility; however, limited data are available on the effectiveness of cosolvents for field-contaminated media. In this work, we examine cosolvent flushing for the removal of polycyclic aromatic hydrocarbons (PAHs) in soil from a former manufactured gas plant (FMGP). Batch studies confirmed that the relationship between the soil-cosolvent partitioning coefficient (K(i)) and the volume fraction of cosolvent (f(c)) followed a standard log-linear equation. Using methanol at an fc of 0.95, column studies were conducted at varying length scales, ranging from 11.9 to 110 cm. Removal of PAH compounds was determined as a function of pore volumes (PVs) of cosolvent flushed. Despite using a high f(c), rate and chromatographic effects were observed in all the columns. PAH effluent concentrations were modeled using a common two-site sorption model. Model fits were improved by using MeOH breakthrough curves to determine fitted dispersion coefficients. Fitted mass-transfer rates were two to three orders of magnitude lower than predicted values based on published data using artificially contaminated sands.     

Physical and chemical properties of feedlot pen surfaces located on moderately coarse- and moderately fine-textured soils in southern Alberta

Southern Alberta has the highest density of feedlot cattle in Canada, and there is a concern that leaching of water and contaminants may be greater for feedlots located on coarser-textured than finer-textured soils. Our objective was to determine if infiltration and leaching were greater for a 4-yr-old feedlot located on a moderately coarse-textured (MC) soil compared with two feedlots located on moderately fine-textured (MF) soils (5- and 52-yr-old pens). Various soil physical properties of feedlot pen surfaces were measured, including field-saturated hydraulic conductivity (K(fs)) and near-saturated hydraulic conductivity at -0.9 and -3.9 cm water potential. Selected chemical properties of feedlot soil layers were measured, as well as the chloride content of the soil profile (0-100 cm). Mean K(fs), K(-0.9), and K(-3.9) values were not significantly (P > 0.10) greater at the MC site than the two MF sites, indicating no evidence of greater infiltration on coarser-textured soils. In addition, mean K(fs), K(-0.9), and K(-3.9) values of soils within feedlot pens at all three sites were significantly (P < or = 0.10) reduced by 46 to 78% compared with soil outside the pens. Depth of chloride accumulation was greatest at the 52-yr-old feedlot on MF soil (60-70 cm), followed by 4-yr-old feedlot on MC soil (40-50 cm) and 5-yr-old feedlot on MF soil (30-40 cm). Visual inspection determined that the black interface layer formed within 2 mo of cattle stocking at all three sites.     

POTENTIAL EFFECTS OF CLIMATE CHANGE ON SURFACE‐WATER QUALITY IN NORTH AMERICA1

ABSTRACT: Data from long‐term ecosystem monitoring and research stations in North America and results of simulations made with interpretive models indicate that changes in climate (precipitation and temperature) can have a significant effect on the quality of surface waters. Changes in water quality during storms, snowmelt, and periods of elevated air temperature or drought can cause conditions that exceed thresholds of ecosystem tolerance and, thus, lead to water‐quality degradation. If warming and changes in available moisture occur, water‐quality changes will likely first occur during episodes of climate‐induced stress, and in ecosystems where the factors controlling water quality are sensitive to climate variability. Continued climate stress would increase the frequency with which ecosystem thresholds are exceeded and thus lead to chronic water‐quality changes. Management strategies in a warmer climate will therefore be needed that are based on local ecological thresholds rather than annual median condition. Changes in land use alter biological, physical, and chemical processes in watersheds and thus significantly alter the quality of adjacent surface waters; these direct human‐caused changes complicate the interpretation of water‐quality changes resulting from changes in climate, and can be both mitigated and exacerbated by climate change. A rigorous strategy for integrated, long‐term monitoring of the ecological and human factors that control water quality is necessary to differentiate between actual and perceived climate effects, and to track the effectiveness of our environmental policies.     

Do national levels of individualism and internal locus of control relate to well‐being: an ecological level international study

Data were collected from managers in 24 nations/territories on work locus of control (LOC), individualism–collectivism (I–C), and well‐being (job satisfaction, absence of psychological strain, and absence of physical strain). There were significant mean differences across samples on all five of these measures, and consistent with our hypothesis, at the ecological or sample mean level well‐being was associated with an internal locus of control. However, contrary to our hypothesis, well‐being was not associated with I–C, despite a strong correlation between I–C and LOC. Findings at the ecological level were consistent with the literature concerning the salutary effects of control on well‐being. Copyright © 2001 John Wiley & Sons, Ltd.     

MODELING UPLAND EROSION1

ABSTRACT: We have developed a computer model of soil loss on an upland watershed from the continuity considerations for sediment transport and from equations describing rill and interrill erosion. The model is based on dividing the upland area into a grid containing rill and interill zones, on the Universal Soil Loss Equation (USLE), and on equations describing detachment and transport capacity of rill flow. The USLE estimates the sediment load from the contributing areas. The location and amount of total erosion and deposition are determined by comparing the transport and detachment capacity of rill flow for specific storms. The model considers the mechanics of erosion process and can serve as basis for reservoir and channel design and land use planning.     

Pine needles as sensors of atmospheric pollution

Neutron Activation Analysis of pine needles from trees growing in areas of relatively high and low airborne pollution has been performed. Needles of three different species, and from several sequential year's crops, have been studied. The purpose of the study was to determine the type of distribution governing the elemental concentrations, the inter-and intrasite differences, and the degree of dependence on soil vs airborne elemental sources. A log normal distribution was found for those elements considered to be well determined. The results indicate that pine needles can be used as an air pollution monitor provided that sufficient sampling is done to compensate for natural variation in elemental concentrations.