Modelling spatial patterns of correlations between concentrations of heavy metals in mosses and atmospheric deposition in 2010 across Europe

Background

This paper aims to investigate the correlations between the concentrations of nine heavy metals in moss and atmospheric deposition within ecological land classes covering Europe. Additionally, it is examined to what extent the statistical relations are affected by the land use around the moss sampling sites. Based on moss data collected in 2010/2011 throughout Europe and data on total atmospheric deposition modelled by two chemical transport models (EMEP MSC-E, LOTOS-EUROS), correlation coefficients between concentrations of heavy metals in moss and in modelled atmospheric deposition were specified for spatial subsamples defined by ecological land classes of Europe (ELCE) as a spatial reference system. Linear discriminant analysis (LDA) and logistic regression (LR) were then used to separate moss sampling sites regarding their contribution to the strength of correlation considering the areal percentage of urban, agricultural and forestry land use around the sampling location. After verification LDA models by LR, LDA models were used to transform spatial information on the land use to maps of potential correlation levels, applicable for future network planning in the European Moss Survey.

Results

Correlations between concentrations of heavy metals in moss and in modelled atmospheric deposition were found to be specific for elements and ELCE units. Land use around the sampling sites mainly influences the correlation level. Small radiuses around the sampling sites examined (5 km) are more relevant for Cd, Cu, Ni, and Zn, while the areal percentage of urban and agricultural land use within large radiuses (75–100 km) is more relevant for As, Cr, Hg, Pb, and V. Most valid LDA models pattern with error rates of <?40% were found for As, Cr, Cu, Hg, Pb, and V. Land use-dependent predictions of spatial patterns split up Europe into investigation areas revealing potentially high (=?above-average) or low (=?below-average) correlation coefficients.

Conclusions

LDA is an eligible method identifying and ranking boundary conditions of correlations between atmospheric deposition and respective concentrations of heavy metals in moss and related mapping considering the influence of the land use around moss sampling sites.

     

HERBICIDES AND DEGRADATES IN SHALLOW AQUIFERS OF ILLINOIS: SPATIAL AND TEMPORAL TRENDS1

ABSTRACT: During the fall of 2000, the occurrence was examined of 16 herbicides and 13 herbicide degradates in samples from 55 wells in shallow aquifers underlying grain producing regions of Illinois. Herbicide compounds with concentrations above 0.05 μg/L were detected in 56 percent of the samples. No concentrations exceeded regulatory drinking water standards. The six most frequently detected compounds were degradates. Water age was an important factor in determining vulnerability of ground water to transport of herbicide compounds. Unconsolidated aquifers, which were indicated to generally contain younger ground water than bedrock aquifers, had a higher occurrence of herbicides (73 percent of samples) than bedrock aquifers (22 percent). Temporal analysis to determine if changes in concentrations of selected herbicides and degradates could be observed over a near decadal period indicated a decrease in detection frequency (25 to 18 percent) between samplings in 1991 and 2000. Over this period, significant differences in concentrations were observed for atrazine (decrease) and total acetochlor (increase). The increase in acetochlor compound concentrations corresponds to an increase in acetochlor use during the study period, while the decrease in atrazine concentrations corresponds to relatively consistent use of atrazine. Changes in frequency of herbicide detection and concentration do not appear related to changes in land use near sampled wells.     

ESTIMATED CONSUMPTIVE LOSS FROM MAN-MADE SNOW1

ABSTRACT: Consumptive loss of water attributable to man-made snowmaking was estimated using an energy balance model and a mass balance procedure. Data from nine field experiments at Colorado ski areas were collected and used in these models. The mean consumptive loss using the energy balance model for the nine experiments was 6.0 percent and 5.8 percent for the mass balance model A thermodynamic relationship and a regression equation were developed to provide a procedure to estimate consumptive loss as a linear function of atmospheric temperature.     

A comparison of North American and Asian exposure–response data for ozone effects on crop yields

Modelling-based studies to assess the extent and magnitude of ozone (O₃) risk to agriculture in Asia suggest that yield losses of 5–20% for important crops may be common in areas experiencing elevated O₃ concentrations. These assessments have relied on European and North American dose–response relationships and hence assumed an equivalent Asian crop response to O₃ for local cultivars, pollutant conditions and climate. To test this assumption we collated comparable dose–response data derived from fumigation, filtration and EDU experiments conducted in Asia on wheat, rice and leguminous crop species. These data are pooled and compared with equivalent North American dose–response relationships. The Asian data show that at ambient O₃ concentrations found at the study sites (which vary between ～35–75 ppb 4–8 h growing season mean), yield losses for wheat, rice and legumes range between 5–48, 3–47 and 10–65%, respectively. The results indicate that Asian grown wheat and rice cultivars are more sensitive to O₃ than the North American dose–response relationships would suggest. For legumes the scatter in the data makes it difficult to reach any equivalent conclusion in relative sensitivities. As such, existing modelling-based risk assessments may have substantially underestimated the scale of the problem in Asia through use of North American derived dose–response relationships.     

Assessment of the abiotic transformation of 17β-estradiol in the presence of vegetable matter--II: the role of molecular oxygen

This study characterizes the effect of oxygen in the abiotic transformation of estrogens when they are contacted with a surrogate of the vegetable wastes found in sewage. 17β-Estradiol (E2) and 17β-¹⁴C₄-estradiol (¹⁴C-E2) were utilized as model compounds. Batch experiments were run under both oxic and anoxic conditions. In order to accomplish an accurate mass balance of the target estrogen, two analyses were performed simultaneously: first, radioactivity counting, and second, quantitation of E2 and ¹⁴C-E2, as well as their transformation product estrone and ¹⁴C₄-estrone, by Liquid Chromatography tandem Mass Spectrometry. Under oxic conditions, the total concentration of ¹⁴C-E2 was found to decrease by 78% in 72 h (15% and 7% remained in the liquid and solid phases, respectively). Conversely, when the estrogens were contacted with the synthetic influent under anoxic conditions, E2 was quantitatively recovered after 72 h (70% and 22% in aqueous and solid matrices, correspondingly). These results suggest that when the concentration of dissolved oxygen is null or limited, catalysis through an oxidative coupling mechanism is halted. Moreover, it was confirmed that the catalytic reaction occurred solely in the presence of the solid phase of the model vegetable matter.     

Design of Afterburners for Varnish Cookers

Currently, outdoor ozone levels in many U.S. cities exceed the primary health-based national ambient air quality standard. While outdoor ozone levels are an important measure of the severity of those exceedances, people typically spend more than 80 percent of their time Indoors, where ozone levels are lower. Indoor ozone levels range from 10 to 80 percent of outdoor levels, with many people receiving a substantial portion of their ozone exposure while indoors. This paper uses an Indoor air quality model (IAQM) to estimate indoor ozone levels by mlcroenvlronment type (home, office, and vehicle) and configuration (windows open, windows closed, older construction, weatherized, and air conditioned). The formulation of IAQM is discussed, along with specification of model parameters for ozone. The multicompartment version of IAQM is described, with a single-compartment version used for the analyses. IAQM-calculated ozone indoor-outdoor ratios compare well with research-reported values. Results indicate that ozone peak-concentration indoor-outdoor ratios range as follows: home—0.65 (windows open), 0.36 (air conditioned), 0.23 (typical construction, windows closed), and 0.05 (energy-efficient construction, windows closed); office—0.82 (heat-Ing, ventilation and air conditioning systems supplying 100 percent outdoor air), 0.60 (typical HVAC), and 0.32 (energy-efficient HVAC); and vehicle—0.41 (85 mph), 0.33 (55 mph), and 0.21 (10 mph). Analysis results are presented to characterize IAQM’s sensitivity to assumed model parameters.     

A Comparison of Various Sources of Automotive Emissions

Chlorinated phenolic hydrocarbons are used as intermediate chemicals in the manufacture of 2,4-D (2,4-Dichlorophenoxy-acetic Acid) and related herbicides. These chemicals have an unusual odor with an extremely low threshold level of detection and consequently the manufacture and handling of these compounds poses a difficult odor control problem. Chipman Chemical Company at its Portland, Oregon plant has developed a system of fume collection and caustic soda solution scrubbing capable of removing phenolic compounds in the plant exhaust air to an acceptable level from an odor release standpoint. This article describes the development, present status, and projected future improvements of this odor control system.     

Modelling and field application of the Chemcatcher passive sampler calibration data for the monitoring of hydrophobic organic pollutants in water

Passive sampling of dissolved pollutants in water has been gaining acceptance for environmental monitoring. Previously, an integrative passive sampler consisting of a C18 Empore disk receiving phase saturated with n-octanol and fitted with low density polyethylene membrane, was developed and calibrated for the measurement of time weighted average (TWA) concentrations of hydrophobic pollutants in water. In this study, the exchange kinetics were modelled to obtain a better understanding of the mechanism of the accumulation process and to enable the measurement of TWA concentrations of hydrophobic pollutants in the field. An empirical relationship that enables the calculation of in situ sampling rates of chemicals using performance reference compounds was derived and its application was demonstrated in a field study in which TWA aqueous concentrations estimated from sampler data for target analytes were compared with TWA concentrations obtained from spot samples of water collected regularly during the sampler deployment period.     

Emissions of polychlorinated biphenyls (PCBs) from sludge drying beds to the atmosphere in Chicago

Ambient air PCB concentrations in the Lake Calumet region in Southeast Chicago have been found to be significantly higher than in nearby non-urban areas. This area is highly industrialized and also contains municipal sludge drying facilities and landfills. In an effort to quantify the importance of the sludge drying facilities to the elevated concentrations, upwind/downwind air samples from the Calumet East sludge drying bed were obtained between April and October 2002. For these samples, the downwind minus upwind (downwind-upwind) concentration varied from 0.33 to 1.27ngm(-3) for non-northeast (NE) direction winds suggesting sludge drying is a source of PCBs to the atmosphere. However, the upwind concentrations were higher than the downwind for winds from the NE of the sampling site suggesting more significant source(s), possibly Lake Calumet or the so called "Cluster site" NE of the sludge drying beds. Flux chamber experiments carried out during the sampling period measured average PCB fluxes of 210ngm(-2)h(-1) (range 43-910ngm(-2)h(-1)) which resulted in an overall flux of 0.005kgday (d)(-1) ( approximately 2kgyr(-1)). A developed regression equation between moisture content and sludge concentration estimated higher PCB losses of 0.26kgd(-1) ( approximately 95kgyr(-1)). Although these two approaches yielded different values, they both indicate that the emission from the Calumet East sludge drying beds were of minimal importance when compared to the total estimated amount of 2-70kgd(-1) (700-2100kgyr(-1)) of PCBs entering the Chicago atmosphere.