Can a low-carbon development path achieve win-win development: evidence from China’s low-carbon pilot policy

Mitigation and Adaptation Strategies for Global Change - Low-carbon pilot (LCP) policy aims to not only achieve economic development but also address climate change problems in China. With a...     

硅橡胶自然环境加速试验方法与自然环境试验方法等效性研究

目的研究自然环境加速试验方法与自然环境试验方法的等效性。方法针对6141硅橡胶,在高原、沙漠、湿热三个自然环境条件下,采用玻璃框、黑箱、强制通风玻璃框、单轴跟踪太阳4种已有自然环境加速试验装置,开展4种自然环境加速试验方法与户外暴露自然环境试验方法的对比试验,运用图形与秩和检验法分析不同自然环境加速试验方法与自然环境试验方法的等效性。结果在高原、沙漠、湿热三个典型环境条件下,采用6141硅橡胶对比开展的玻璃框、黑箱、强制通风玻璃框、单轴跟踪太阳4种自然环境加速试验与三个典型环境条件下的户外暴露试验中,其拉伸强度服从同一性能变化规律。结论在高原、沙漠、湿热三个典型环境条件下,开展的6141硅橡胶玻璃框、黑箱、强制通风玻璃框、单轴跟踪太阳4种自然环境加速试验与三个典型环境条件下的户外暴露试验具有等效性。     

基于污泥堆肥产物与余泥渣土制备的人工土壤的理化性质分析与评价

为实现污水厂污泥及余泥渣土的协同处理和资源化利用,以“两步法”制备人工土壤,考察不同配比条件对人工土壤理化性质的影响。结果表明：污水污泥与3种不同辅料 (玉米秸秆、菌菇渣、木屑) 配比后进行好氧堆肥,堆肥结束后腐熟度符合国家相关标准要求,将污泥堆肥产物和余泥渣土制备得到人工土壤,其理化性质与天然土壤类似。堆肥添加量能显著影响人工土壤水稳性团聚体、pH值、EC、有机质、总氮及有效磷含量,在人工土壤种植应用时,污泥+玉米秸秆的堆肥种植效果最好,采用改进的内罗梅综合指数法进行综合评价,综合考虑,污泥+玉米秸秆堆肥产物添加量为30%、余泥渣土添加量为70%和污泥+玉米秸秆堆肥产物添加量为50%、余泥渣土添加量为50%是最优质的人工土壤,污泥+木屑堆肥次之,污泥+菌菇渣堆肥效果最差。     

Quantitative evaluation of environmental risks of flotation tailings from hydrothermal sulfidation–flotation process

Floatation tailings (FT) are the main by-products of the hydrothermal sulfidation–flotation process. FT (FT₁ and FT₂) were obtained by treating two different neutralization sludges (NS) (NS₁ and NS₂). This paper quantitatively evaluated the environmental risks of heavy metals (Zn, Cd, Cu, Pb, and As) in FT versus NS. The total concentration and leaching rates (R ₂) of heavy metals in FT were much lower than those in NS, demonstrating that the hydrothermal sulfidation–flotation process was able to effectively suppress the mobility and leachability of heavy metals. The BCR-three sequence leaching procedure of FT confirmed that all metals were transformed into more stable forms (residue and oxidizable forms) than were found that in NS. The potential ecological risk index indicated that the overall risks caused by heavy metals decreased significantly from 6627.59 and 7229.67 (very serious risk) in NS₁ and NS₂, respectively, to 80.26 and 76.27 (low risk) in FT₁ and FT₂, respectively. According to the risk assessment code, none of the heavy metals in FT posed significant risk to the natural environment except Zn (with low risk). In general, the risk of heavy metals in FT had been well controlled.     

Assessing heavy metal pollution in the surface soils of a region that had undergone three decades of intense industrialization and urbanization

Heavy metals in the surface soils from lands of six different use types in one of the world’s most densely populated regions, which is also a major global manufacturing base, were analyzed to assess the impact of urbanization and industrialization on soil pollution. A total of 227 surface soil samples were collected and analyzed for major heavy metals (As, Cd, Co, Cr, Cu, Fe, Hg, Mn, Ni, Pb, and Zn) by using microwave-assisted acid digestion and inductively coupled plasma–mass spectrometry (ICP-MS). Multivariate analysis combined with enrichment factors showed that surface soils from the region (>7.2?×?10⁴ km²) had mean Cd, Cu, Zn, and As concentrations that were over two times higher than the background values, with Cd, Cu, and Zn clearly contributed by anthropogenic sources. Soil pollution by Pb was more widespread than the other heavy metals, which was contributed mostly by anthropogenic sources. The results also indicate that Mn, Co, Fe, Cr, and Ni in the surface soils were primarily derived from lithogenic sources, while Hg and As contents in the surface soils were controlled by both natural and anthropogenic sources. The pollution level and potential ecological risk of the surface soils both decreased in the order of: urban areas?>?waste disposal/treatment sites?～?industrial areas?>?agricultural lands?～?forest lands?>?water source protection areas. These results indicate the significant need for the development of pollution prevention and reduction strategies to reduce heavy metal pollution for regions undergoing fast industrialization and urbanization.     

CNTs/TiO2/CS光降解苯的动力学

综合光催化氧化苯的动力学过程、光辐射场模型和质量守恒定律,采用平板型反应器建立了碳纳米管/二氧化钛/壳聚糖(CNTs/TiO2/CS)催化薄膜光催化氧化气相苯的数学模型;该模型考虑了光强、相对湿度、初始浓度与气体流速对气相苯光降解的影响。结果表明,建立的数学模型与实验结果吻合较好。     

Bioaccessibility of polychlorinated biphenyls in workplace dust and its implication for risk assessment

Human exposure to bioaccessible PCBs via indoor dust is limited around the world. In the present study, the workplace dust sample from commercial office, hospital, secondary school, shopping mall, electronic factory and manufacturing plant were collected from Hong Kong for PCBs analyses. Total PCBs concentrations ranged from 46.8 to 249 ng g⁻¹, with a median of 107 ng g⁻¹. Manufacturing plant showed the highest concentration among all of sampling sites. PCB 77 was found as the dominant congeners. The bioaccessibility of PCBs in small intestinal juice ranging from 8.3% to 26.0% was significantly higher than that in gastric condition, ranging from 4.8% to 12.4%. In addition, significant negative correlations (p < 0.05) were observed between K_OW and bioaccessibility for all workplace dust samples. Risk assessment indicated that the averaged daily dose of dioxin-like PCBs via non-dietary intake of workplace dust, considering the bioaccessibility of PCBs, were much lower than the TDI of dioxins (2.3 pg WHO-TEQ kg bw⁻¹ d⁻¹) established by Joint FAO/WHO Expert Committee on Food Additives.     

中低温厌氧处理城市污水污泥颗粒化的研究

用高径比为3：1的UASB反应器分别在35℃和室温条件下处理模拟城市污水,研究了污泥的颗粒化过程.比较了在不同温度、浓度下形成的颗粒污泥的特征.水温为9～25℃,进水浓度为100～200 mg COD/L,水力上流速度（Vup）在0.013～0.11 m/h的4^#UASB反应器在60 d内在形成了成熟的颗粒污泥.研究表明,进水中低的有机物浓度,低的Ca^2＋、Mg^2＋浓度和低的Vup没有抑制颗粒化进程.     

纳米ZnO/PS薄膜的制备及光降解性能

利用纳米ZnO与聚苯乙烯(PS)高速共混法制备了一种在紫外光下具有自降解性能的复合薄膜.分析表明,经过KH570处理的纳米ZnO与PS通过化学键的方式桥联在一起.TG分析表明,复合薄膜的耐热性较PS有所提高;SEM图像显示0.5 wt％ ZnO在PS薄膜表面分布均匀,经过UV照射后薄膜表面出现光腐蚀现象.复合薄膜紫外光自降解实验表明:0.5 wt％ ZnO/PS薄膜在15W的紫外灯照射下,15d的自降解率为3.715％.     

白腐菌应用于堆肥处理含木质素废物的研究

白腐菌对木质素具有较强的降解能力。通过在含大量木质素的模拟垃圾堆肥中采取添加白腐菌菌剂与不添加该菌剂2组实验对比,在相同堆肥处理条件下,接种菌剂的堆肥中木质素总量由274988mg降至15438mg,降解率达4386%,远高于未接种菌剂的堆肥中木质素的降解率,表明白腐菌可有效用于含木质素废弃物的堆肥处理,并有望于加速堆肥腐熟,提高堆肥效率。