Kinetics on the decomposition of polychlorinated biphenyls with activated carbon-supported iron

The process of destroying polychlorinated biphenyls (PCBs) generates exhaust gases that contain low quantities of PCBs, which cannot be disposed of easily. Activated carbon (AC) can be used to adsorb residual PCBs after disposal of high-level PCBs. We examined the chemical reactivity of AC-supported iron as a catalyst to decompose PCB-153, and varied three decomposition parameters (temperature, time and iron concentration) under an atmosphere of either air or N(2). We measured the Brunauer-Emmett-Teller (BET) surface area and pore volume of AC to assess the adsorption capacity of AC before and after decomposition. At low temperatures the adsorption process was more important than the decomposition process. The decomposition process was completed within 30 and 60 min under air and N(2), respectively. The efficiency of PCB-153 decomposition at 350 degrees C for 120 min was approximately 100.0% and 97.1% under air and N(2), respectively. Analysis of inorganic chloride ions revealed that PCB-153 was effectively destroyed during decomposition. The differences between decomposition under air and N(2) reflected differences in BET surface and pore volume.     

Methods for the preparation of a biodesulfurization biocatalyst using Rhodococcus sp

Several methods to prepare a biodesulfurization (BDS) biocatalyst were investigated in this study using a strain of Rhodococcus sp. 1awq. This bacterium could selectively remove sulfur from dibenzothiophene (DBT) via the "4S" pathway. DBT, dimethylsulfoxide (DMSO), sodium sulphate and mixed sulfur sources were used to study their influence on cell density, desulfurization activity, desulfurization ability, and the cost of biocatalyst production. In contrast to that observed from bacteria cultured in DBT, only partial desulfurization activity of strain 1awq was induced by DBT after cultivation in a medium containing inorganic sulfur as the sole sulfur source. The biocatalyst, prepared from culture with mixed sulfur sources, was found to possess desulfurization activity. With DMSO as the sole sulfur source, the desulfurization activity was shown to be similar to that of bacteria incubated in medium with DBT as the sole sulfur source. The biocatalyst prepared by this method with the least cost could remove sulfur from hydrodesulfurization (HDS)-treated diesel oil efficiently, providing a total desulfurization percent of 78% and suggesting its cost-effective advantage.     

A robust approach for iterative contaminant source location and release history recovery

Contamination source identification is a crucial step in environmental remediation. The exact contaminant source locations and release histories are often unknown due to lack of records and therefore must be identified through inversion. Coupled source location and release history identification is a complex nonlinear optimization problem. Existing strategies for contaminant source identification have important practical limitations. In many studies, analytical solutions for point sources are used; the problem is often formulated and solved via nonlinear optimization; and model uncertainty is seldom considered. In practice, model uncertainty can be significant because of the uncertainty in model structure and parameters, and the error in numerical solutions. An inaccurate model can lead to erroneous inversion of contaminant sources. In this work, a constrained robust least squares (CRLS) estimator is combined with a branch-and-bound global optimization solver for iteratively identifying source release histories and source locations. CRLS is used for source release history recovery and the global optimization solver is used for location search. CRLS is a robust estimator that was developed to incorporate directly a modeler's prior knowledge of model uncertainty and measurement error. The robustness of CRLS is essential for systems that are ill-conditioned. Because of this decoupling, the total solution time can be reduced significantly. Our numerical experiments show that the combination of CRLS with the global optimization solver achieved better performance than the combination of a non-robust estimator, i.e., the nonnegative least squares (NNLS) method, with the same solver.     

Distribution and dissipation pathways of nonylphenol polyethoxylates in the Yellow River: Site investigation and lab-scale studies

Spatial distribution of nonylphenol polyethoxylates (NPEOs) and nonylphenol (NP) was investigated in a field study in Lanzhou Reach of the Yellow River. NPEOs and their metabolites were found in the river, with the maximum dissolved concentrations of 6.38 nmol/L for NPEOs, 0.19 nmol/L for nonylphenol ethoxy acetic acids (NPECs) and 0.79 nmol/L for NP, respectively. The maximum concentrations in the sediment and suspended particle samples were 1.50 and 5.09 nmol/g for NPEOs and NP, respectively. The effects of particles, light and microorganism on the dissipation of NPEOs in the river water were investigated based on lab-scale experiments. When natural particles were removed, 72% and 22% degradation of NPEOs were achieved at 120 h in non-sterile and sterile conditions with light, respectively. Different concentrations of NPECs were also observed in these experiments. When suspended particle matters (SPMs) were present, about 38-50% of NPEOs were sorbed to the particulate phase in only 1 h. As a result, the degradation of NPEOs and production of NPECs were inhibited. However, the combined sorption and degradation in the presence of SPMs resulted in lower dissolved NPEO concentrations than those in the absence of SPMs. Biodegradation was the most important pathway for NPEOs degradation in the river water, while NPECs seemed to be produced through both biological and abiological pathways.     

油层注水过程中水质不合要求的危害及保护措施

分析了油田在二次采油注水过程中,对水质的要求,讨论了水质不合格带来的危害并提出了保护措施.     

特警战训服面料开发技术研究

本文介绍了以芳纶纤维为主要材料的我国新一代特警战训服面料的技术研发及达到的主要性能指标。通过试验研究,开发了具有高强防撕裂、永久阻燃、耐高温、防静电、防油拒水、防酸碱等具有集成防护功能的特警战训服系列面料。     

雨雪冰冻灾害后粤北森林各林型凋落物动态

为了考察中国亚热带不同森林类型对雨雪冰冻灾害的响应模式,以粤北天井山3种代表性的林型—针叶林、阔叶林和混交林为对象,于不同森林类型中比较受损森林与未受损森林在凋落物年产量、成分及月际动态方面的差异,从而在凋落物水平上反映不同森林类型在雨雪冰冻灾害后的早期恢复力。研究结果表明,灾后针叶林、阔叶林和混交林的年凋落量分别为0.52、3.21、1.37 t.hm-2,比未受损的同种森林类型年凋落量显著减少,减少程度分别为87.89%、53.46%、76.78%。由此可以看出阔叶林的植被恢复情况最好,说明在凋落物水平上,其灾后恢复的早期阶段恢复力最强。在凋落物成分方面,灾后各森林类型叶凋落物所占比例显著增加,枝凋落物所占比例则显著减少。受损针叶林和阔叶林的凋落物月动态与未受损森林基本一致,但其波动幅度较小;在混交林中,受损和未受损森林其凋落量的季节动态模式则表现出不一致性且为不规则型。根据研究结果,建议在亚热带地区优先考虑种植阔叶林以促进受损森林在类似雨雪冰冻灾害的极端天气后的恢复。     

纳米氧化镍颗粒对长牡蛎(Crassostreagigas)抗氧化防御体系的影响

纳米氧化镍(nNiO)作为一种广泛使用的纳米颗粒,其水生毒理效应研究还很有限。为探索n Ni O对海洋贝类的毒性机制,本研究将长牡蛎(Crassostrea gigas)置于不同浓度(0、1、10、100 mg·L~(-1))的n Ni O中暴露96 h,分别测定鳃和消化腺组织的丙二醛(MDA)含量和超氧化物歧化酶(SOD)、过氧化物酶(POD)以及过氧化氢酶(CAT)活性,并通过实时荧光定量PCR技术测定了鳃和消化腺中应激蛋白HSP70和AOX基因的表达变化。结果显示:在100 mg·L~(-1)n Ni O处理下,2种组织中MDA含量均显著性升高(P0.01),显示纳米颗粒造成了长牡蛎的脂质过氧化,并可能引起相应的氧化损伤。同时,n Ni O暴露也诱导了长牡蛎抗氧化酶(SOD、CAT和POD)活性的改变。其中,SOD和CAT活性在10 mg·L~(-1)浓度处理组达到最高,而POD活性在1 mg·L~(-1)浓度组即达最高值。在高浓度n Ni O(100 mg·L~(-1))胁迫下,3种抗氧化酶的活性均比低浓度(1和10 mg·L~(-1))处理组降低,表明抗氧化酶的保护作用在较低浓度暴露下更有效;而热激蛋白(hsp70)和交替氧化酶(aox)基因却分别在长牡蛎消化腺和鳃组织中上调表达(P0.01),并表现出一定的组织差异。说明高浓度纳米颗粒暴露中主要是应激蛋白发挥了作用。本文结果为纳米氧化镍对海洋双壳贝类的毒性机制研究及生态风险评估提供了基础数据。     

Potential CO2 intrusion in near-surface environments: a review of current research approaches to geochemical processes

Environmental Geochemistry and Health - Carbon dioxide (CO2) capture and storage (CCS) plays a crucial role in reducing carbon emissions to the atmosphere. However, gas leakage from deep storage...     

钢板组合PEC柱-削弱截面钢梁组合框架抗震试验研究

为深入研究PEC柱-钢梁组合框架结构体系的抗震性能,设计了1榀两层单跨钢板组合截面PEC柱-削弱截面钢梁组合框架1∶2缩尺试件,并对其进行了低周往复荷载抗震试验。根据实测数据整理,得到了试验滞回特征曲线,并结合试验过程现象记录,分析了试件滞回特性、抗侧刚度退化规律、节点连接性能、耗能与延性和试件破坏模式等力学性能。研究结果表明:试件结构具有较高的承载力和较大的抗侧刚度;采取梁端截面削弱方式可实现梁端塑性铰位置远离节点区,且端板对穿螺栓连接能有效将梁端受拉翼缘拉力转化为对应边对节点区的压力,使得节点区形成了混凝土斜压带传力模式,提高了节点区抗震性能;试件滞回曲线较为饱满,在梁翼缘与端板连接焊缝存在施工缺陷情况下,其整体侧移、延性系数和等效黏滞阻尼比分别达到3.50%(推)/4.50%(拉)、2.92(推)/3.21(拉)和0.306,且承载力仍未下降至其极限承载力的85%,即试件结构具有良好的变形、抗震延性与耗能能力;该试件在循环往复荷载下呈现的破坏模式为梁削弱截面部位和PEC柱脚相继形成塑性铰的塑性机构。