Antiradical activity of natural honeys and antifungal effect against Penicillium genera

The purpose of the study was to examine the antiradical activity of 11 natural honeys and to evaluate the antifungal properties of honey. Honey samples (10) were collected from different locations of Slovak Republic. Honeys were native to different plant species of Robinia pseudoacaccia, Brassica napus subs. napus, Castanea sativa Mill. Thymus serpyllum vulgaris and the other samples had multifloral origin. The low antiradical activitity in honey samples was determined. The best results were found in thyme honey from Rhodos (11.84 %) and Castanea honey from Nitra (10.61 %). The lowest antiradical activity was found in Acacia honey and determined to be 7.62 %. Statistically significant differences (P< 0.001) were found among thyme/Rhodos and Castanea/Nitra. The antifungal activities of honey samples were tested by 10 %, 25 % and 50 % (by mass per volume) concentration against fungi Penicillium crustosum, P. expansum, P. griseofulvum, P. raistrickii and P. verrucosum and by the agar well diffusion method. The solutions containing 10 % (by mass per volume) of honey did not have any effect on the growth of fungi. The strongest antifungal effect was shown by 50 % honey concentration against P. raistrickii.     

Phosphorus retention in small constructed wetlands treating agricultural drainage water

The construction of artificial wetlands has become a measure increasingly applied to reduce nonpoint-source (NPS) pollution and to contribute to the restoration of eutrophic lakes and coastal waters. In a 2-yr study monitoring fluxes of particulate and dissolved phosphorus (P) in a small artificial wetland for the treatment of agricultural drainage water in Central Switzerland, water residence time was identified as the main factor controlling P retention in the system. Since most of the annual P load (62% as dissolved reactive phosphorus, DRP) was related to high discharge events, it was not average but minimum water residence time during flood events that determined the wetland's P retention. In agreement with a continuous stirred tank reactor (CSTR) model, our investigations suggest a minimum water residence time of 7 d to retain at least 50% of the bioavailable P. The investigated wetland retained only 2% of the bioavailable P, since the water residence time was shorter than 7 d during 61% of time in both years. Settling of phytoplankton rather than DRP uptake into phytoplankton limited the retention of bioavailable P. The overall retention efficiency of 23% total phosphorus (TP), corresponding to a surface related retention of 1.1 g P m(-2) yr(-1), was due to the efficient trapping of pedogenic particles.     

Assessing tether anchor labeling and usability in pickup trucks

Objective: The objective of this study was to investigate vehicle factors associated with child restraint tether use and misuse in pickup trucks and evaluate 4 labeling interventions designed to educate consumers on proper tether use.

Methods: Volunteer testing was performed with 24 subjects and 4 different pickup trucks. Each subject performed 8 child restraint installations among the 4 pickups using 2 forward-facing restraints: a Britax Marathon G4.1 and an Evenflo Triumph. Vehicles were selected to represent 4 different implementations of tether anchors among pickups: plastic loop routers (Chevrolet Silverado), webbing routers (Ram), back wall anchors (Nissan Frontier), and webbing routers plus metal anchors (Toyota Tundra). Interventions included a diagram label, Quick Response (QR) Code linked to video instruction, coordinating text label, and contrasting text tag.

Results: Subjects used the child restraint tether in 93% of trials. However, tether use was completely correct in only 9% of trials. An installation was considered functional if the subject attached the tether to a tether anchor and had a tight installation (ignoring routing and head restraint position); 28% of subjects achieved a functional installation. The most common installation error was attaching the tether hook to the anchor/router directly behind the child restraint (near the top of the seatback) rather than placing the tether through the router and attaching it to the anchor in the adjacent seating position. The Nissan Frontier, with the anchor located on the back wall of the cab, had the highest rate of correct installations but also had the highest rate of attaching the tether to components other than the tether anchor (seat adjustor, child restraint storage hook, around head restraint). None of the labeling interventions had a significant effect on correct installation; not a single subject scanned the QR Code to access the video instruction. Subjects with the most successful installations spent extensive time reviewing the vehicle manuals.

Conclusion: Current implementations of tether anchors among pickup trucks are not intuitive for child restraint installations, and alternate designs should be explored. Several different labeling interventions were ineffective at achieving correct tether use in pickup trucks.     

Financing Marine Protected Areas Through Visitor Fees: Insights from Tourists Willingness to Pay in Chile

Tourism is a financing mechanism considered by many donor-funded marine conservation initiatives. Here we assess the potential role of visitor entry fees, in generating the necessary revenue to manage a marine protected area (MPA), established through a Global Environmental Facility Grant, in a temperate region of Chile. We assess tourists’ willingness to pay (WTP) for an entry fee associated to management and protection of the MPA. Results show 97 % of respondents were willing to pay an entrance fee. WTP predictors included the type of tourist, tourists’ sensitivity to crowding, education, and understanding of ecological benefits of the MPA. Nature-based tourists state median WTP values of US$ 4.38 and Sun-sea-sand tourists US$ 3.77. Overall, entry fees could account for 10–13 % of MPA running costs. In Chile, where funding for conservation runs among the weakest in the world, visitor entry fees are no panacea in the short term and other mechanisms, including direct state/government support, should be considered.     

Equivalent leak definitions for Smart LDAR (leak detection and repair) when using optical imaging technology

Controlling fugitive emissions from leaks in petrochemical industry process equipment now requires periodic monitoring of valves, flanges, pumps etc., typically on a quarterly basis. Previous studies have shown that over 90% of the reducible emissions come from approximately 0.1% of the components, i.e. the large leakers. A new, and more cost-effective approach for controlling these large leakers would entail more frequent monitoring of process equipment, allowing for the detection and repair of the highly leaking components that contribute the most to emissions. This approach has been called "Smart LDAR." New optical imaging instruments, which significantly reduce monitoring costs, are now available to implement such an alternative work practice. This work describes the determination of the leak detection sensitivity (equivalency threshold) that an optical imaging instrument must achieve to ensure that it will provide at least the equivalent emission control of the current leak detection and repair practice. Equivalency thresholds were developed for various monitoring intervals. The U.S. Environment Protection Agency's Monte Carlo simulation approach was used to perform the analysis and to demonstrate that optical imaging, which is capable of identifying all of the largest leakers, can provide better control of fugitive emissions.     

Endosulfan acute toxicity and histomorphological alterations in Jenynsia multidentata (Anablepidae, Cyprinodontiformes)

Toxicity tests using adult specimens of Jenynsia multidentata were carried out during 96 hours in order to determine the lethal concentration (LC50) of endosulfan. Histological alterations were determined in gills and liver. Gill damage was quantified as secondary lamellae thickness. The 96 hr LC50 values were significantly different between males (0.719 microg x L(-1)) and females (1.317 microg x L(-1)). The sex difference was attributed to the dimorphism in the lipid content in females (2.16%) and males (1.79%). Histological alterations in gills included hypertrophy and lifting of the epithelium of the secondary lamellae and aneurisms. These alterations caused a significant increase of the secondary lamellae thickness in treatment versus control fish. Finally, reversible histological alterations (such as hydropic degeneration and dilation of sinusoids) were observed in the liver of exposed fish as well as an irreversible change such as necrosis at the highest concentrations.     

Aquivalence revisited--new model formulation and application to assess environmental fate of ionic pharmaceuticals in Hamilton Harbour, Lake Ontario

A model formulation based on "aquivalence", as defined in terms of activity is presented to estimate the multimedia fate of ionizing chemicals. The aquivalence approach is analogous to fugacity but aquivalence is applicable to neutral and ionizing compounds, and has been applied previously to speciating chemicals, notably metals. The new aquivalence-based mass-balance model treats ionizing organic compounds that exist as interconverting neutral and ionic species which are subject to fate processes at differing rates. The model is illustrated by application to four ionizing pharmaceuticals in Hamilton Harbour, Lake Ontario. At the system pH of 7.9-8.5, ibuprofen, gemfibrozil, and naproxen are expected to be almost entirely ionic and triclosan split between ionic and neutral forms. Measured seasonal surface water concentrations, which were 2-10 times lower in the late summer and fall than during spring, were used to solve for unknown values of chemical half-life in the water column due to degradation (photo- and bio-) of the ionizing and neutral forms and secondarily, ionic sorption coefficients of the ionizing forms. Model estimates of half-lives in the habour's water ranged from 11 to 77, 11 to 147 and 10 to 37 for ionic ibuprofen, gemfibrozil, and naproxen, respectively; and 4-22 days and 2-9 days for ionic and neutral triclosan, respectively, with the shortest half-lives in spring and the longest in summer.     

Evolution rates and PCB content of surface films that develop on impervious urban surfaces

Surface films on impervious surfaces mediate the fate of organic contaminants in urban areas. Using sheltered 3-mm diameter glass beads as a surrogate impervious urban surface, studies in downtown Toronto showed that surface films developed at a consistent rate of 1.6–2.6 nm day⁻¹. Linear film growth was observed up to and including the last day of three studies of 89-, 273-, and 84-day duration. Total PCB content (sum of 15 PCB congeners) also increased linearly, at a similar rate as the surface film. A complementary study using unsheltered beads showed that up to 80% of film mass and PCB content were removed by film wash-off during rain events. The film growth rate on beads exposed at a rural site, 200 km northeast of Toronto, was 12–20 times lower with PCB burdens that were 7–22 times lower compared to Toronto. Based on these findings, it is estimated that approximately 56–226 g of PCBs are captured by a 70 nm thick film covering just the horizontal surface area of Toronto. This is a substantial quantity of PCB that is available for rapid surface–air exchange and wash-off.