Environmental issue of exotic catfish culture in Uttar Pradesh

A survey was conducted in Uttar Pradesh to enlist the available exotic fish species in culture. The culture and feeding details of unofficially introduced Clarias gariepinus was collected from 419 ponds existing in rural areas of 23 districts of Uttar Pradesh. The data indicated that 32% ponds were culturing exotic fishes of which 79% cases are of monoculture of exotic African catfish. Feeding analysis of these exotic African catfish revealed that 7% cases subsist on natural pond feed while 29% cases are fed on slaughter house waste. In 32% cases of the exotic magur monoculture, chicken waste was given whereas 11% cases were recorded with fish waste feeding. The possible threats and environmental risks of such unauthorised and indiscreminate culture of exotic magur has been discussed in this paper.     

Bioleaching of metals from spent lithium ion secondary batteries using Acidithiobacillus ferrooxidans

Bioleaching of spent lithium ion secondary batteries, containing LiCoO2, was attempted in this investigation. The present study was carried out using chemolithotrophic and acidophilic bacteria Acidithiobacillus ferrooxidans, which utilized elemental sulfur and ferrous ion as the energy source to produce metabolites like sulfuric acids and ferric ion in the leaching medium. These metabolites helped dissolve metals from spent batteries. Bio-dissolution of cobalt was found to be faster than lithium. The effect of initial Fe(II) concentration, initial pH and solid/liquid (w/v) ratio during bioleaching of spent battery wastes were studied in detail. Higher Fe(II) concentration showed a decrease in dissolution due co-precipitation of Fe(III) with the metals in the residues. The higher solid/liquid ratio (w/v) also affected the metal dissolution by arresting the cell growth due to increased metal concentration in the waste sample. An EDXA mapping was carried out to compare the solubility of both cobalt and lithium, and the slow dissolution rate was clearly found from the figures.     

Chemical Recycling of Polyamide Waste at Various Temperatures and Pressures Using High Pressure Autoclave Technique

Chemical recycling of polyamide waste in water was studied using 0.5 L high pressure autoclave at temperatures of 150, 200, 210, 220,230 and 240 °C and at various pressures of 100, 200, 300, 400, 500, 600 and 700 psi (pound per square inch). Viscosity average molecular weight of the polyamide waste sample was determined by Ostwald method and recorded as 1.928 × 10³. The reaction was found to be first order with velocity constant in order of 10⁻² min⁻¹. The velocity constant and percent conversion of depolymerization reaction at 240 °C and 700 psi pressure were recorded as 2.936 × 10⁻² min⁻¹ and 99.99% respectively. The velocity constant was obtained on the basis of measurement of amine value. Kinetic and thermodynamic parameters such as energy of activation, frequency factor, enthalpy of activation were found to be 10.6 kJ mole⁻¹, 0.3719 min⁻¹ and 6.3 kJ mole⁻¹ respectively, at the optimum conditions for maximum depolymerization of polyamide waste.     

Property-enhanced paraffin-based composite phase change material for thermal energy storage: a review

Environmental Science and Pollution Research - Research on phase change material (PCM) for thermal energy storage is playing a significant role in energy management industry. However, some hurdles...     

Fabrication of ZnO–SnO2 nanocomposite and its photocatalytic activity for enhanced degradation of Biebrich scarlet

Environmental Science and Pollution Research - The n–n-type ZnO–SnO2 nanocomposite was fabricated using malic acid following a simple one-pot co-precipitation method. The fabricated...     

Regulation of nuclear radiation exposures in India

India has a long-term program of wide spread applications of nuclear radiations and radioactive sources for peaceful applications in medicine, industry, agriculture and research and is already having several thousand places in the country where such sources are being routinely used. These places are mostly outside the Department of Atomic Energy (DAE) installations. DAE supplies such sources. The most important application of nuclear energy in DAE is in electricity generation through nuclear power plants. Fourteen such plants are operating and many new plants are at various stages of construction. In view of the above mentioned wide spread applications, Indian parliament through an Act, called Atomic Energy Act, 1964 created an autonomous body called Atomic Energy Regulatory Board (AERB) with comprehensive authority and powers. This Board issues codes, guides, manuals, etc., to regulate such installations so as to ensure safe use of such sources and personnel engaged in such installations and environment receives radiation exposures within the upper bounds prescribed by them. Periodic reports are submitted to AERB to demonstrate compliance of its directives. Health, Safety and Environment Group of Bhabha Atomic Research Centres, Mumbai carries out necessary surveillance and monitoring of all installations of the DAE on a routine basis and also periodic inspections of other installations using radiation sources. Some of the nuclear fuel cycle plants like nuclear power plants and fuel reprocessing involve large radioactive source inventories and have potential of accidental release of radioactivity into the environment, an Environmental Surveillance Laboratory (ESL) is set up at each such site much before the facility goes into operation. These ESL's collect baseline data and monitor the environment throughout the life of the facilities including the decommissioning stage. The data is provided to AERB and is available to members of the public. In addition, a multi-tier system of AERB permissions is in place to ensure that all aspects of safety have been considered before permission to operate is granted. The stages where permission of AERB is essential are site selection, design data, and several stages during construction and operation. The details required by AERB include provision for treatment and storage of radioactive waste, de-commissioning procedures and provision of costs. In addition to AERB, nuclear power plants have to comply with the requirements of Ministry of Environment and Forests and get their clearance. This is given on the basis of Environmental Impact Assessment Report which should satisfy the authorities that no ecological damage will be caused and the facility will not have adverse effect on the environment. In addition, the State Pollution Control Board where the facility is to be located has to permit the site of the plant for its proposed discharges into the environment. It is largely due to the above comprehensive regulatory controls that none of the plants in India had any accident during the last 34 decades of operation. The type of measurements carried out by the ESL's and results from a few typical ESL's will be presented.     

Application of remote sensing techniques toward the role of traditional water bodies with respect to vegetation conditions

Sri Lanka being an agrarian country, the role of water is important for agricultural production. In Sri Lanka, various tank cascade systems, earthen dams and distribution canals have been accepted as few of the most complex ancient traditional water systems of the world. Rainfall, surface water, groundwater and runoff are linked with each other, they have close interactions to land cover classes such as forests and agriculture. The monitoring of vegetation conditions can show subsurface manifestations of groundwater. In this study, an effort to understand the role of traditional water reservoirs and groundwater recharge was made using remote sensing techniques. We have analyzed various vegetation indices such as Normalized Difference Vegetation Index (NDVI), Enhanced Vegetation Index (EVI-2), Soil-Adjusted Vegetation Index (SAVI), tasselled cap transformation analysis (TCA brightness, greenness and wetness) and their relations with the existence of soil, vegetation and water. Result shows that EVI, SAVI, and TCA-based Greenness Index indicates good relationship with the vegetation conditions as compared to other indices. Therefore, these indices could play a crucial role in depicting the interaction between soil, vegetation, and water. However, multi-temporal observations can provide significant results about these interactions more accurately.     

Pollution monitoring with the help of lichen transplant technique at some residential sites of Lucknow City, Uttar Pradesh

Samples of foliose lichen, Dirinaria consimillis (Fr.) Awasthi were transplanted at six residential sites of Lucknow city for monitoring the concentration of Cr, Zn, Pb, Cu and Cd metals at two vertical positions. The concentration of chromium and copper were more at the higher vertical position than the lower one. The maximum zinc was at lower vertical position than the upper one. Lead and cadmium were not detected in the present study.     

Removal of congo red from aqueous solution by bagasse fly ash and activated carbon: kinetic study and equilibrium isotherm analyses

Present investigation deals with the utilisation of bagasse fly ash (BFA) (generated as a waste material from bagasse fired boilers) and the use of activated carbons-commercial grade (ACC) and laboratory grade (ACL), as adsorbents for the removal of congo red (CR) from aqueous solutions. Batch studies were conducted to evaluate the adsorption capacity of BFA, ACC and ACL and the effects of initial pH (pH(0)), contact time and initial dye concentration on adsorption. The pH(0) of the dye solution strongly affected the chemistry of both the dye molecules and BFA in an aqueous solution. The effective pH(0) was 7.0 for adsorption on BFA. Kinetic studies showed that the adsorption of CR on all the adsorbents was a gradual process. Equilibrium reached in about 4h contact time. Optimum BFA, ACC and ACL dosages were found to be 1, 20 and 2 g l(-1), respectively. CR uptake by the adsorbents followed pseudo-second-order kinetics. Equilibrium isotherms for the adsorption of CR on BFA, ACC and ACL were analysed by the Freundlich, Langmuir, Redlich-Peterson, and Temkin isotherm equations. Error analysis showed that the R-P isotherm best-fits the CR adsorption isotherm data on all adsorbents. The Freundlich isotherm also shows comparable fit. Thermodynamics showed that the adsorption of CR on BFA was most favourable in comparison to activated carbons.     

Inequality in water supply in India: an assessment using the Gini and Theil indices

Provision of drinking water is considered to be an essential public service. Ensuring adequate water supply remains a challenge in Indian cities that are experiencing rapid growth and often exhibit a mismatch between increasing demands and inadequate supply infrastructure. This study quantifies the existing inequality in water supply within Indian cities through Lorenz curve, Gini coefficient as well as Theil indices. Two types of Theil indices are estimated to gain different perspectives: water supply and population-weighted. Both the Theil indices are disaggregated, according to economic and regional categorisation of the cities, to explore the within- and between-group inequality. The water supply and population-weighted Theil indices provide different outlook of the inequality amongst the cities. But the population-weighted index is often better and pragmatic. Further, the inequality in access to tap water in India is studied by estimating modified Lorenz curves and Theil indices. Again, the Theil indices are decomposed into within and between components according to economic and regional grouping of states. The results suggest that there is disparity in supply of water in India, and infrastructure has to be boosted to meet the growing demand. This study is a step towards quantification of water supply inequality. The approach used in the study can contribute to monitoring of water supply equity as well as in formulating sustainable and equitable water policies.