Bioleaching of metals from spent lithium ion secondary batteries using Acidithiobacillus ferrooxidans

Bioleaching of spent lithium ion secondary batteries, containing LiCoO2, was attempted in this investigation. The present study was carried out using chemolithotrophic and acidophilic bacteria Acidithiobacillus ferrooxidans, which utilized elemental sulfur and ferrous ion as the energy source to produce metabolites like sulfuric acids and ferric ion in the leaching medium. These metabolites helped dissolve metals from spent batteries. Bio-dissolution of cobalt was found to be faster than lithium. The effect of initial Fe(II) concentration, initial pH and solid/liquid (w/v) ratio during bioleaching of spent battery wastes were studied in detail. Higher Fe(II) concentration showed a decrease in dissolution due co-precipitation of Fe(III) with the metals in the residues. The higher solid/liquid ratio (w/v) also affected the metal dissolution by arresting the cell growth due to increased metal concentration in the waste sample. An EDXA mapping was carried out to compare the solubility of both cobalt and lithium, and the slow dissolution rate was clearly found from the figures.     

Role of blue green algae biofertilizer in ameliorating the nitrogen demand and fly-ash stress to the growth and yield of rice (Oryza sativa L.) plants

Rice is a major food crop throughout the world; however, accumulation of toxic metals and metalloids in grains in contaminated environments is a matter of growing concern. Field experiments were conducted to analyze the growth performance, elemental composition (Fe, Si, Zn, Mn, Cu, Ni, Cd and As) and yield of the rice plants (Oryza sativa L. cv. Saryu-52) grown under different doses of fly-ash (FA; applied @ 10 and 100 tha(-1) denoted as FA(10) and FA(100), respectively) mixed with garden soil (GS) in combination with nitrogen fertilizer (NF; applied @ 90 and 120 kg ha(-1) denoted as NF(90) and NF(120), respectively) and blue green algae biofertilizer (BGA; applied @ 12.5 kg ha(-1) denoted as BGA(12.5)). Significant enhancement of growth was observed in the plants growing on amended soils as compared to GS and best response was obtained in amendment of FA(10)+NF(90)+BGA(12.5). Accumulation of Si, Fe, Zn and Mn was higher than Cu, Cd, Ni and As. Arsenic accumulation was detected only in FA(100) and its amendments. Inoculation of BGA(12.5) caused slight reduction in Cd, Ni and As content of plants as compared to NF(120) amendment. The high levels of stress inducible non-protein thiols (NP-SH) and cysteine in FA(100) were decreased by application of NF and BGA indicating stress amelioration. Study suggests integrated use of FA, BGA and NF for improved growth, yield and mineral composition of the rice plants besides reducing the high demand of nitrogen fertilizers.     

An innovative technique for lake management with reference to aeration unit installed at lower lake, Bhopal, India

Water is key element in human life. All forms of life upon the earth depend upon water for their mere existence. Life & water may be aptly said to be two facets of the same coin. Most of the water bodies are getting polluted due to domestic waste, sewage, industrial waste and agricultural effluent. The present study is designed to ascertain the effectiveness of artificial aeration cum Ozonizer unit installed at Lower Lake, Bhopal for assessment of water quality. Various physico- chemical parameters like pH, Dissolved oxygen, Biochemical Oxygen demand, Chemical oxygen demand, nitrate, phosphate and bacteriological status were studied to assess the extent of deterioration in water quality of Lower lake and at the same time to assess the performance of the dual aeration system in improvement of water quality.     

Seasonal variation in amylase, invertase, cellulase activity and carbon dioxide evolution in a tropical protected grassland of Orissa, India, sprayed with carbaryl insecticide

A distinct seasonal variation in the enzyme activities and carbon dioxide evolution in soil, with a maximum in summer, was observed in soil treated with carbaryl and in control soil. There was no significant difference in the rate of enzyme activity between 0 and 10 cm and 10 and 20 cm depth of soil. Carbaryl insecticide applied at a normal agricultural dose did not have any inhibitory effect on soil enzyme activity, or on the rate of CO(2) evolution. However, the cellulase activity was greater in the surface soil of the control plot than in the treated plot.     

Cr(VI) removal from synthetic wastewater using coconut shell charcoal and commercial activated carbon modified with oxidizing agents and/or chitosan

In this study, the technical feasibility of coconut shell charcoal (CSC) and commercial activated carbon (CAC) for Cr(VI) removal is investigated in batch studies using synthetic electroplating wastewater. Both granular adsorbents are made up of coconut shell (Cocos nucifera L.), an agricultural waste from local coconut industries. Surface modifications of CSC and CAC with chitosan and/or oxidizing agents, such as sulfuric acid and nitric acid, respectively, are also conducted to improve removal performance. The results of their Cr removal performances are statistically compared. It is evident that adsorbents chemically modified with an oxidizing agent demonstrate better Cr(VI) removal capabilities than as-received adsorbents in terms of adsorption rate. Both CSC and CAC, which have been oxidized with nitric acid, have higher Cr adsorption capacities (CSC: 10.88, CAC: 15.47 mg g(-1)) than those oxidized with sulfuric acid (CSC: 4.05, CAC: 8.94 mg g(-1)) and non-treated CSC coated with chitosan (CSCCC: 3.65 mg g(-1)), respectively, suggesting that surface modification of a carbon adsorbent with a strong oxidizing agent generates more adsorption sites on their solid surface for metal adsorption.     

Removal of congo red from aqueous solution by bagasse fly ash and activated carbon: kinetic study and equilibrium isotherm analyses

Present investigation deals with the utilisation of bagasse fly ash (BFA) (generated as a waste material from bagasse fired boilers) and the use of activated carbons-commercial grade (ACC) and laboratory grade (ACL), as adsorbents for the removal of congo red (CR) from aqueous solutions. Batch studies were conducted to evaluate the adsorption capacity of BFA, ACC and ACL and the effects of initial pH (pH(0)), contact time and initial dye concentration on adsorption. The pH(0) of the dye solution strongly affected the chemistry of both the dye molecules and BFA in an aqueous solution. The effective pH(0) was 7.0 for adsorption on BFA. Kinetic studies showed that the adsorption of CR on all the adsorbents was a gradual process. Equilibrium reached in about 4h contact time. Optimum BFA, ACC and ACL dosages were found to be 1, 20 and 2 g l(-1), respectively. CR uptake by the adsorbents followed pseudo-second-order kinetics. Equilibrium isotherms for the adsorption of CR on BFA, ACC and ACL were analysed by the Freundlich, Langmuir, Redlich-Peterson, and Temkin isotherm equations. Error analysis showed that the R-P isotherm best-fits the CR adsorption isotherm data on all adsorbents. The Freundlich isotherm also shows comparable fit. Thermodynamics showed that the adsorption of CR on BFA was most favourable in comparison to activated carbons.     

Rapid photocatalytic degradation of the recalcitrant dye amaranth by highly active N-WO<Subscript>3</Subscript>

Dye wastewater is a major source of toxic aromatic amines released into the environment. Semiconductor photocatalysis is a clean, solar-driven process for the treatment of dye wastewater. To enhance applicability of semiconductor photocatalysis, the catalyst used should be visible light active. Here we report a facile synthesis of a highly visible-light-active nitrogen-doped tungsten oxide, N-WO₃, by thermal decomposition of peroxotungstic acid–urea complex. The structure and properties of N-WO₃ are characterized by X-ray photoelectron spectroscopy and X-ray absorption near-edge spectroscopy. The photodegradation of amaranth catalyzed by N-WO₃ is evaluated in a batch system under visible and ultraviolet A (UVA) light. Our results show successful doping of N in both interstitial and substitutional sites and the presence of N₂-like species. The N doping surprisingly expands the usable portion of the solar spectrum up to the near-infrared region and enhances the photocatalytic activity. At typical experimental conditions such as 25 mg/L of amaranth, 1 g/L of N-WO₃, and pH 7, 100 % degradation of amaranth is achieved within 2 h under both visible and UVA light. The photocatalytic activity of N-WO₃ is maintained in repeated cycles, indicating its exceptional photostability. To the best of our knowledge, this is the first time that a reusable, highly visible-light-active N-WO₃ can be obtained through thermal decomposition of peroxotungstic acid–urea complex.     

A Grey-Based Taguchi Approach for Characterization of Erosive Wear Phenomenon of Glass–Polyester Fly Ash Filled Composites

Fly ash is a solid waste generated in huge quantities from coal fired thermal power stations during the combustion of coal. In India, less than half of this is used as a raw material for concrete manufacturing and construction; the remaining is directly dumped on land side as land fill or simply piled up. Only a small fraction of it is used in development of high valued product. Due to environmental regulations, new ways of utilizing fly ash are being explored in order to safeguard the environment and provide useful ways for its utilization and disposal. With its richness in various metal oxides, it has tremendous potential to be utilized as a filler material in polymer composites. These days glass reinforced polyester composites find widespread application in erosive environment due to several advantages like high wear resistance, strength-to-weight ratio, and low cost. The cost of the composites can be further brought down using cheaper filler materials. To this end, this work uses fly ash in composite making and thereby suggests a new way of better utility of this industrial waste. It includes the processing, characterization and study of the erosion behavior of a class of such fly ash filled polyester-glass fiber composites. The engineering application of composites demands that it should have high wear resistance, low density and high tensile strength. In order to assess the behavior of composites satisfying multiple performance measures, a grey-based Taguchi approach has been adopted. After thorough analysis of factors, optimal factor settings have been suggested to improve multiple responses viz., erosive wear rate, density, flexural strength and tensile strength. This technique eliminates the need for repeated experiments; thus saves time and material. The systematic experimentation leads to determination of significant process parameters and material variables that predominantly influence the multiple responses.     

A matrix for selecting sustainable floor coverings for buildings in Sri Lanka

This paper presents a method to facilitate the decision-making process in selecting sustainable floors (elements) for buildings in Sri Lanka, taking into consideration environmental, economic and social assessments of materials used for these elements. Two types of elements are selected for this study, namely, tile and vinyl tile. Environmental burdens associated with these elements are analyzed in terms of embodied energy and environmental impacts that are relevant to Sri Lanka, such as global warming, acidification and nutrient enrichment. Economic analysis is based on market prices and affordability of materials. Factors considered for the social analysis are thermal comfort, good interior (aesthetics), ability to construct fast, strength and durability. It was found that tile elements are superior to vinyl tile elements on environmental scores if processes of complete life cycle of these elements are taken into account. On social score also, tile elements (104.8) are better than vinyl tile elements (51.15). But on economic score, vinyl tile elements are better. These scores are presented in a matrix which will help in selecting sustainable floor coverings for buildings.     

Impact of malathion on the biochemical parameters of gobiid fish, Glossogobius giuris (Ham)

There is a dearth of information regarding the changes in heart muscle metabolites induced by pesticides. In the present study, the gobiid fish, Glossogobius giuris, was exposed to sub lethal concentrations of (0.05, 0.25 and 0.5 ppm) organophosphorus pesticide, malathion for short duration (24 to 96 hr). The cardiac muscles showed maximum depletion of glycogen and cholesterol content during 72 and 96 hr after treatment with 0.5 ppm malathion. Whereas a slight fluctuation of protein and glycogen content was observed in low concentration (0.05 ppm) of malathion. The levels of protein showed a significant decrease at high concentration (0.5 ppm) when treated for longer duration (96 hr). The present study reports metabolic dysfunction in response to malathion toxicity in the fish.