Distribution of heavy metals in sediment and water of river Gomti

Gomti river receives industrial as well as domestic wastes from various drains of Lucknow city. In the process the water and sediment of the river Gomti get contaminated with heavy metals and other pollutants. In the present study, impacts of domestic/industrial wastes on the water and sediment chemistry of river Gomti with special reference to heavy metals have been investigated in different seasons (summer, winter and rainy). For this, seven sampling sites: Gaughat, Mohan Meakin, Martyrs Memorial, Hanuman Setu, Nishatganj bridge, Pipraghat and Malhaur, in the river Gomti in Lucknow region were identified and samples of water and sediments were collected in all the three seasons. In the collected water and sediment samples, six metals (Cd, Cr, Cu, Ni, Pb, and Zn) were analyzed on ICP-AES (Inductively coupled plasma emission spectroscopy) Labtam Plasmalab 8440. High concentrations of all the metals were noticed in water and sediment in rainy season compared to summer and winter. Because in rainy season runoff from open contaminated sites, agricultural field and industries, directly comes into the river without any treatment. In both the cases, the concentration of zinc was maximum (0.091 g/ml in water and 182.13 g/g in sediment) and the concentration of cadmium (0.001 g/ml in water and 17.26 g/g in sediment) was minimum. Higher concentration of metal in water and sediment during rainy season could be due to the industrial/agricultural/domestic runoff coming into the river.     

Lung subcellular fractions and surfactant lipid metabolism of rats exposed with DDT or endosulfan intratracheally

The effect of intratracheally administered DDT (5 mg/100 g body weight) or endosulfan (1 mg/100 g body weight) for three consecutive days has been studied on lipid metabolism of rat lung subcellular fractions. Both the insecticides did not affect the lung weight and the protein contents of microsomes, lamellar bodies and surfactant but significantly increased the phospholipid contents of microsomal and surfactant system. Most of the neutral lipid components of lung subcellular fractions were also increased by DDT or endosulfan treatments, except that of surfactant triglycerides which were decreased by DDT treatment. DDT or endosulfan both increased the incorporation of radioactive [methyl-3H]choline into microsomal phosphatidylcholine (PC) and surfactant dipalmitoylphosphatidylcholine (DPPC) without affecting the incorporation of radioactive [methyl-14C]methionine, showing the increased synthesis of PC via CDPcholine pathway. The results presented in this communication showed that DDT and endosulfan, the two different chloroinsecticides have similar effects on microsomal lipid metabolism but produce different biochemical manifestations on the secretion of surfactant phospholipids.     

Assessment of traditional rights,local interference and natural resource management in Kedarnath Wildlife Sanctuary

An assessment of human interference in Kedarnath Wildlife Sanctuary (KWLS) showed huge dependence of local communities on forest fringes. KWLS is under active consideration as a national park because of its unique flora and fauna. Studies have evidenced habitat destruction and successional changes in the area because of ongoing unsustainable harvesting and logging. The present study provides an integrated approach towards evaluating resource extraction and management of the sanctuary. The study was based on in-depth semi-structured interviews and group discussions with local inhabitants of six villages and with forest officials. In addition, regeneration patterns and vegetation analysis was conducted in three land tenurial systems: community forest (CF), reserve forest (RF) and protected forest (PF). Key issues identified were wildlife offences, encroachment, pressure from unsustainable harvesting of resources and lack of livelihood opportunities. Ecological studies showed continuous change in regeneration patterns in forest patches/stands. The local survey stressed managing sanctuary fringes considering the village economy, social issues and resource requirements, and enhancing on-farm resource production to reduce pressure on forests. Forest personnel demanded more training on encroachment and poaching, these being major threats to biodiversity and bio-resources. Supporting and providing better livelihood opportunities is a viable option for minimizing pressure and managing biodiversity of the area through active community participation. This study generated useful outcomes and strategies for advancing policies to reduce pressure and overcome management constraints in the sanctuary.     

Regeneration of granular activated carbon loaded with explosives

Granular activated carbon (GAC) loaded with trinitrotoluene (TNT) and nitrobenzene (NB) were subjected to different atmospheres, such as nitrogen, oxygen, air, steam and an air-steam mixture, at varying temperatures and for different time intervals for regeneration. The air-steam mixture proved to be the best regenerating media for the explosive-loaded GACs. The regeneration of the activated carbon was found to be above 85% for TNT and above 90% for NB loaded carbons.     

Novel Biobased Polyurethanes Synthesized from Soybean Phosphate Ester Polyols: Thermomechanical Properties Evaluations

Biobased polyurethanes from soybean oil–derived polyols and polymeric diphenylmethane diisocyanate (pMDI) are prepared and their thermomechanical properties are studied and evaluated. The cross-linked biobased polyurethanes being prepared from soy phosphate ester polyols with hydroxyl contents ranging from 122 to 145 mg KOH/g and pMDI within 5 min of reaction time at 150°C in absence of any catalyst show cross-linking densities ranging from 1.8 × 10³ to 3.0 × 10³ M/m³, whereas glass transition temperatures vary from approximately 69 to 82°C. The loss factor (tan ) curves show single peaks for all these biobased polyurethanes, thus indicating a single-phase system. The storage moduli (G) at 30°C range from 4 × 10⁸ to 1.3 × 10⁹ Pa. Upon postcure at 150°C, the thermomechanical properties can be optimized. Cross-link densities are improved significantly for hydroxyl content of 139 and 145 mg KOH/g at curing time of 24 h. Similarly, glass transition temperature (T_g) and storage moduli around and after T_g are increased. Meanwhile, tan intensities decrease as result of restricted chain mobility. Longer exposure time (24 h) induces thermal degradation, as evidenced by thermogravimetric analysis (TGA). The dynamic mechanical (DMA) analysis shows that postcure at 100°C for times exceeding 24 h also leads to improved properties. However, cross-linking densities are lower compared to postcure carried out at 150°C.     

Comparative performance study of different configurations of organic Rankine cycle using low-grade waste heat for power generation

This paper aims at analyzing the feasibility of a waste heat recovery power generation plant based on parametric optimization and performance analysis using different organic Rankine cycle configurations and heat source temperature conditions with working fluid R-12, R-123, R-134a, and R-717. A parametric optimization of turbine inlet temperature(TIT) was performed to obtain the irreversibility rate, system efficiency, availability ratio, turbine work output, system mass flow rate, second-law efficiency, and turbine outlet quality, along the saturated vapor line and also on superheating at an inlet pressure of 2.50 MP in basic as well as regenerative organic Rankine cycle. The calculated results reveal that selection of a basic organic Rankine cycle using R-123 as working fluid gives the maximum system efficiency, turbine work output, second-law efficiency, availability ratio with minimum system irreversibility rate and system mass flow rate up to a TIT of 150°C and appears to be a choice system for generation of power by utilizing the flue gas waste heat of thermal power plants and above 150°C the regenerative superheat organic Rankine cycle configuration using R 123 as working fluid gives the same results.     

Groundwater Quality Monitoring in Shallow and Deep Aquifers in Saidabad Tahsil Area, Mathura District, India

Water availability in arid regions is both sporadic and highly variable in quantity. If the water quality shows large variations of salinity and concentration of other chemical constituents with depth and time span, it has considerable effect on the entire hydrological set up of the area. In the Saidabad tahsil area, the deep aquifers that supply water to borewells in the alluvial plain of the Mathura region, Uttar Pradesh, have higher salinity than those of the dugwells from the shallow aquifers. The excessive drilling of tubewells and high yield tubewells are resulting in deterioration of water quality of the shallow aquifers. On the contrary, the chemical constituents such as, Na⁺, K ⁺, Cl ^-, andHCO ₃ ^- show higher concentration in shallow aquifers than deep aquifers. A study carried out to monitor water quality in this region reveals that the groundwater quality varies with depth and time span in shallow and deep aquifers. Factors controlling variations in salinity and concentration of chemical constituents of the water in the two types of aquifers are discussed. The relative merits of the shallow water for potability are pointed out with respect to salinity concentrations and public health.     

A Study of Dynamic Mechanical and Thermal Behavior of Starch/Poly(vinylalcohol) Based Films

Starch/Poly(vinylalcohol) blends in two different ratios (60:40 and 50:50) were prepared with glycerol as a plasticizer. Films were cast by a solution casting method. One set of films were filled with 10 wt% of bentonite clay and another set of films were crosslinked with epichlorohydrin in an alkaline medium. The prepared film samples were characterized with dynamic mechanical analysis (DMA) and thermogravimetric analysis (TGA). The presence of clay and crosslinking with epichlorohydrin was found to have considerable effect on the dynamic mechanical properties and thermal stability of the films. Intercomponent H-bonding between starch, Poly(vinylalcohol) and glycerol enhanced the thermal stability of the films. But incorporation of clay and crosslinking with epichlorohydrin enhanced the steric crowding and lowered the thermal stability of the films.