Saddle seat reduces musculoskeletal discomfort in microsurgery surgeons

Background. Microsurgery is a surgical procedure requiring a high degree of precision and is commonly facilitated through the use of an intraoperative microscope. When operating the microscope system, the long-term posture leads to musculoskeletal disorders in surgeons, and seats are commonly employed to diminish these problems. The present study was conducted to evaluate musculoskeletal discomfort during work with a saddle seat in comparison with conventional seats for microscopic work. Methods. Two types of seats, a saddle and a conventional one, were evaluated for 73 microsurgical surgeons in terms of musculoskeletal discomfort. Corlett and Bishop's body part discomfort scale was used to assess musculoskeletal discomfort before and after working with the seats. Results. The highest amount of discomfort that microsurgical surgeons acquire in the workplace was focused on their neck, shoulders, arms and back. During work with a saddle seat, a significant reduction was found for discomfort values in the neck, shoulder, arm, back, elbow and forearm, as well as the whole body (p?<?0.05). Conclusion. This study showed that the use of saddle seats provides a more appropriate physical posture at work, and can decrease musculoskeletal discomfort in different parts of the body of microsurgical surgeons.     

Risk factors for being the at-fault driver: A case–control study

Objective: It is estimated that road traffic accidents are globally responsible for approximately 1.2 million deaths and 20 to 50 million injuries. About 70% of traffic incidences (TIs) occur in developing countries and among countries with high TI rates; Iran is the first. The aim of this study was to measure the association between being responsible for a traffic accident and some vehicle, human; and environmental related factors in Yasuj, a city with a high incidence of road traffic injuries and deaths in Iran.

Methods: This is a time-, date-, and place-matched case–control study conducted in 2015 using all traffic accidents registered and investigated by police during 2012. In total, 194 drivers were considered the at-fault driver in a traffic accident and the 194 drivers in the same collisions were included in the analysis.

Results: Based on the results from multivariate conditional logistic regression, significant associations between vehicle maneuver (OR_{Turn to right or left/Moving forward} = 11.10, 95% confidence interval [CI], 1.77–69.58, P = .01) and age (odds ratio [OR] = 1.11, 95% CI, 1.004–1.22, P = .04) and the chance of being an at-fault driver were found.

Conclusion: Driver behavior–related interventions including training and law enforcement seem to be more effective in reducing road traffic accidents in Iran.     

Mitigation of climate change impacts on maize productivity in northeast of Iran: a simulation study

Development and evaluation of mitigation strategies are fundamental to manage climate change risks. This study was built on (1) quantifying the response of maize (Zea mays L.) grain yield to potential impacts of climate change and (2) investigating the effectiveness of changing sowing date of maize as a mitigation option for Khorasan Province which is located in northeast of Iran. Two types of General Circulation Models (GCM: (United Kingdom Met Office Hadley Center :HadCM3) and (Institute Pierre Simon Laplace: IPCM4)) and three scenarios (A1B, A2 and B1) at four locations (Mashhad, Birjand, Bojnourd and Sabzevar) employed in this study. Long Ashton Research Station-Weather Generator (LARS-WG) was employed for generating the future climate. The Cropping System Model (CSM)-CERES-Maize was used for crop growth simulation under projected climate conditions. The results showed the simulated grain yields of maize gradually would decrease (from −1% to −39%) during future 100 years compared to baseline under different scenarios and two GCM at all study locations. The simulation results suggested that delayed sowing date from May to June at all study locations, except Sabzevar location is the most effective mitigation option for avoiding thermal stress at end of growth period. In addition, shifting in sowing date to March or April will be beneficial in terms of obtaining higher yields in Sabzevar. Grain yield did not show special trend from north to south of Khorasan Province in the future climate. In general, change of sowing date may be quite beneficial to mitigate climate change impacts on grain yield of maize in northeast of Iran.     

Groundwater-level trends and implications for sustainable water use in the Kabul Basin, Afghanistan

The Kabul Basin, which includes the city of Kabul, Afghanistan, with a population of approximately 4 million, has several Afghan, United States, and international military installations that depend on groundwater resources for a potable water supply. This study examined groundwater levels in the Kabul Basin from 2004 to 2012. Groundwater levels have increased slightly in rural areas of the Kabul Basin as a result of normal precipitation after the drought of the early 2000s. However, groundwater levels have decreased in the city of Kabul due to increasing water use in an area with limited recharge. The rate of groundwater-level decrease in the city is greater for the 2008–2012 period (1.5 meters per year (m/yr) on average) than for the 2004–2008 period (0–0.7 m/yr on average). The analysis, which is corroborated by groundwater-flow modeling and a non-governmental organization decision-support model, identified groundwater-level decreases and associated implications for groundwater sustainability in the city of Kabul. Military installations in the city of Kabul (the Central Kabul subbasin) are likely to face water management challenges resulting from long-term groundwater sustainability concerns, such as the potential drying of shallow water-supply wells. Installations in the northern part of the Kabul Basin may have fewer issues with long-term water sustainability. Groundwater-level monitoring and groundwater-flow simulation can be valuable tools for assessing groundwater management options to improve the sustainability of water resources in the Kabul Basin.     

Determination of ultra-trace amounts of cadmium by ET-AAS after column preconcentration with a new sorbent of modified MWCNTs

The present research reports on the application of modified multiwalled carbon nanotubes as a new, easily prepared, and stable solid sorbent for the column preconcentration of ultra-trace amounts of cadmium in aqueous solution. Multiwalled carbon nanotubes were oxidized with concentrated HNO₃ and modified with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol and then were used as a solid phase for the column preconcentration of Cd(II). Elution was carried out with 0.5 mol?L^?1 HNO₃. The amount of eluted Cd(II) was measured using electrothermal atomic absorption spectrometry. Various parameters such as pH, sample and eluent flow rate, eluent concentration, breakthrough volume, and interference of a great number of anions and cations on the retention of analyte on sorbent were studied. Under the optimized conditions, the calibration graph was linear in the range of 0.67 ng?L^?1 to 5.0 μg?L^?1 and the detection limit (3S_b, n?=?7) was 0.14 ng?L^?1 in initial solution. A preconcentration factor of 300 and relative standard deviations of ±3.6 % for seven successive determinations of 3 ng of Cd(II) were achieved. The column preconcentration was successfully applied to the analysis of river water, waste water, and Persian Gulf water sample.     

Heterogeneous photocatalysis for removal of microbes from water

Increasing water pollution by microbes has become a source of serious health concern across the globe. Production of potentially carcinogenic disinfection by-products has marred credibility of traditional water purification techniques like chlorination. Photocatalysis has emerged as a promising alternative technique for the disinfection of water with minimal risk of harmful by-products. The process involves a wide band gap semiconductor material which, upon irradiation of light, produces electrons and holes with high redox potential to degrade organic contaminants and microbes. In this review, we analyze the research trends in photocatalytic inactivation of water borne microorganisms. This report analyzes the major factors that affect the disinfection efficiency using this process. The discussion also includes plausible mechanisms of microbial degradation as well as a kinetic model of the inactivation process. Different approaches, like doping of semiconductors or energy band engineering or plasmon coupling, have been reported for the enhancement and utilization of ambient solar light. Photocatalysis could be a cost-effective and environmentally friendly water purification technique though further research is required to enhance its efficiency with the use of solar light.     

Salicylic acid minimizes nickel and/or salinity-induced toxicity in Indian mustard (Brassica juncea) through an improved antioxidant system

Introduction  

This study was hypothesized that salicylic acid elevates the level of antioxidant system that will protect plants from the stress generated by nickel and/or salinity.     

Application of ANN and ANFIS models for reconstructing missing flow data

Hydrological yearbooks, especially in developing countries, are full of gaps in flow data series. Filling missing records is needed to make feasibility studies, potential assessment, and real-time decision making. In this research project, it was tried to predict the missing data of gauging stations using data from neighboring sites and a relevant architecture of artificial neural networks (ANN) as well as adaptive neuro-fuzzy inference system (ANFIS). To be able to evaluate the results produced by these new techniques, two traditionally used methods including the normal ratio method and the correlation method were also employed. According to the results, although in some cases all four methods presented acceptable predictions, the ANFIS technique presented a superior ability to predict missing flow data especially in arid land stations with variable and heterogeneous data. Comparing the results, ANN was also found as an efficient method to predict the missing data in comparison to the traditional approaches.     

Hydration of geosynthetic clay liners from clay subsoil under simulated field conditions

Use of Geosynthetic Clay Liners (GCLs) in landfill barrier design has been the focus of recent studies investigating their ability to prevent contaminant transport to groundwater. In this paper, the hydration of two GCL products placed in contact with clay subsoils at different initial moisture contents is described under both isothermal conditions at room temperature, and daily thermal cycles. The rate of hydration of the GCL and its final equilibrium moisture content were significantly influenced by the amount of moisture made available to it through the subsoil. The two types of GCLs were also found to exhibit different hydration behaviors under similar experimental conditions. The study revealed that GCLs undergoing daily thermal cycles absorbed much less moisture over time than the GCLs kept at constant room temperature (ratio 1:4). In comparison with other types of subsoils, the final equilibrium moisture content attained by the GCL from clay subsoil was significantly less than that for sand subsoil.     

Process development for recovery of copper and precious metals from waste printed circuit boards with emphasize on palladium and gold leaching and precipitation

A novel hydrometallurgical process was proposed for selective recovery of Cu, Ag, Au and Pd from waste printed circuit boards (PCBs). More than 99% of copper content was dissolved by using two consecutive sulfuric acid leaching steps in the presence of H₂O₂ as oxidizing agents. The solid residue of 2nd leaching step was treated by acidic thiourea in the presence of ferric iron as oxidizing agent and 85.76% Au and 71.36% Ag dissolution was achieved. The precipitation of Au and Ag from acidic thiourea leachate was investigated by using different amounts of sodium borohydride (SBH) as a reducing agent. The leaching of Pd and remained gold from the solid reside of 3rd leaching step was performed in NaClO-HCl-H₂O₂ leaching system and the effect of different parameters was investigated. The leaching of Pd and specially Au increased by increasing the NaClO concentration up to 10 V% and any further increasing the NaClO concentration has a negligible effect. The leaching of Pd and Au increased by increasing the HCl concentration from 2.5 to 5 M. The leaching of Pd and Au were endothermic and raising the temperature had a positive effect on leaching efficiency. The kinetics of Pd leaching was quite fast and after 30 min complete leaching of Pd was achieved, while the leaching of Au need a longer contact time. The best conditions for leaching of Pd and Au in NaClO-HCl-H₂O₂ leaching system were determined to be 5 M HCl, 1 V% H₂O₂, 10 V% NaClO at 336 K for 3 h with a solid/liquid ratio of 1/10. 100% of Pd and Au of what was in the chloride leachate were precipitated by using 2 g/L SBH. Finally, a process flow sheet for the recovery of Cu, Ag, Au and Pd from PCB was proposed.