The effect of age on cognitive performance under the impact of vibration in a driving environment.

The effect of organismic variable age on human cognitive performance was studied under the impact of vibration in different automobile driving environments, namely city streets, rural roads and highways. Reaction time was measured in milliseconds through a human response measurement system specifically designed for the purpose. Results of the study showed that age had a significant effect in city street and rural road conditions. It was also found that the level of equivalent acceleration of vibration and a difficulty index significantly affected cognitive performance in all driving conditions. The organismic variable age observed to have a significant effect on task performance implied that youngsters and older people are stressed differently in specific environments of driving so proper stress management strategies should be evolved for them in order to minimize the number of accidents.     

Comparison between Hansen-Hurwitz and Horvitz-Thompson estimators for adaptive cluster sampling

Thompson (1990) introduced the adaptive cluster sampling design. This sampling design has been shown to be a useful sampling method for parameter estimation of a clustered and scattered population (Roesch, 1993; Smith et al., 1995; Thompson and Seber, 1996). Two estimators, the modified Hansen-Hurwitz (HH) and Horvitz-Thompson (HT) estimators, are available to estimate the mean or total of a population. Empirical results from previous researches indicate that the modified HT estimator has smaller variance than the modified HH estimator. We analytically compare the properties of these two estimators. Some results are obtained in favor of the modified HT estimator so that practitioners are strongly recommended to use the HT estimator despite easiness of computations for the HH estimator.     

Potential Fluoride Contamination in the Drinking Water of Naranji Area, Northwest Frontier Province, Pakistan

The drinking water of Naranji village and surrounding areas of the NorthWest Frontier Province (NWFP), Pakistan, was analyzed for its fluoride content. The fluoride content of water samples from the springs in the Naranji village goes up to 13.52 mg kg(-1), which exceeds the permissible limit (1.5 mg kg(-1)) set by the World Health Organization (WHO). This study explores the source of fluoride contamination and attributes it to the alkaline rocks of the Ambela granitic complex and the Koga complex. The low-lying areas towards the south have a fluoride content within the permissible limit. The Naranji area therefore needs urgent remedial measures.     

博斯腾湖流域地下水重金属污染的人体健康风险评估

在新疆博斯腾湖流域绿洲灌区采集67个浅层地下水样品,测定其中Cu、Mn、Cd、Cr、Ni和Zn等6种重金属元素的含量,采用Nemerow综合污染指数对地下水中重金属污染程度进行评价,借助US EPA健康风险评价模型对地下水中重金属污染的潜在健康风险进行评价。结果表明:(1)地下水中各元素平均含量大小顺序依次为:MnZnCuNi CrCd,各元素平均含量均未超出国家标准的限值;(2)研究区地下水中各重金属元素单项污染指数平均值从大到小依次为:Cd(2.04)、Mn(0.69)、Ni(0.45)、Cr(0.24)、Zn(0.07)、Cu(0.03)。综合污染指数的变化范围在0.23～2.22之间,平均值为0.73,呈现轻微污染;(3)健康风险评价结果表明,地下水中6种重金属对成人的潜在非致癌健康风险HI为7.83E-011,表明暴露的个体不太可能有明显的不良健康影响;对儿童的潜在非致癌健康风险HI为1.05E+011,表明研究区地下水重金属可能对当地儿童的健康产生不利影响,有进一步研究的必要性。     

PERSISTENT CONFLICTS OVER TIMBER PRODUCTION AND WATERSHED MANAGEMENP: A PROBLEM ANALYSIS1

ABSTRACT: Most forest lands are managed for multiple purposes, among them timber production and water supply. Conflicts often arise in such cases because logging is perceived as a threat to water quality. These conflicts can result from uncertain factual information, from differences in underlying social values, or from imbalances in the incidence of costs and benefits. Resulting conificts may go unresolved because existing institutional structures fail to address the real roots of the dispute. When such conificts go unresolved, benefits are often lost, and social, political, and managerial costs are high. This study found that the roots of conifict may lie in value differences or in interest impacts, but attention may be focused inappropriately and unproductively on factual issues. It suggests that at least some long-standing disputes in the management of forested watersheds may be resolved by identifying the root causes of these disputes and choosing those actions, whether they be changes in management guidelines or altered institutional structures, which are appropriate to those causes.     

Polypropylene/poly (butylene terephthalate) melt spun alloy fibers dyeable with carrier-free exhaust dyeing as an environmentally friendlier process

Carrier agent as one of the synthetic persistent molecules present in textile effluents considered as one of the most highly toxic, carcinogenic and serious inhibitor of the microbial respirometric activity. This chemical is used as accelerants in the dyeing or printing the hydrophobic fibers by dispersed dyes. Hydrophobic polypropylene (PP) fibers cannot be dyed by conventional dyeing process due to the absence of dye sites in the molecular chain and their high crystallinity. This study presents a carrier-free exhaust dyeing as an environmentally friendlier and cleaner process. In order to produce dyeable PP fibers, the PP was blended and melt spun with poly(butylene terephthalate) (PBT) at various ratios. First PP and PBT granules at blend ratios of 5, 10, 20, 30, 40 percent of PBT dispersed phase were physically mixed then the melt spinning of blended samples was carried out by a Maddock mixing zone extruder. The results showed that suitable exhaust dyeing process without using any carrier agents was possible for all PP/PBT alloy fiber samples. The dye uptake of samples significantly increased by increasing the PBT dispersed phase content. By increasing the PBT dispersed phase content decrease in the crystallinity percent resulting in significant enhancement in dye uptake of the alloy fiber samples was observed. A degree of four polynomial equation for dye uptake against blend ratio was obtained by which the optimum blend ratio was 72/28 percent of PP/PBT alloy fiber composition. In all alloy fiber dyed samples uniform coloration was observed. No considerable changes in the mechanical properties for dyed samples against undyed samples were observed. Interestingly, the best mechanical property among alloy fiber samples was observed in the sample containing 30 percent PBT dispersed phase which approximately corresponds to optimum blend ratio gained from mathematical calculations. In all PP/PBT alloy fiber samples strong fastness to soaping and very good to excellent fastness to light were achieved.     

Eco-friendly dyeing of wool using natural dye from weld as co-partner with synthetic dye

Since the last decade, the application of natural dyes on textile materials is gaining popularity all over the world, possibly because of increasing awareness of environment, ecology, and pollution control. In this research, extraction of dyes from weld using soxhlet apparatus has been studied. The color components extracted and isolated from weld plant were characterized by Column Chromatography, Thin Layer Chromatography (TLC), NMR, mass, IR techniques. The natural dye extract obtained from the weld was used for the dyeing of wool fiber. The results indicated that the exhaustion rate for the extracted dye increases by 49% compared to the raw dye. This, in turn, leads to a considerable decrease in the amount of the extracted dye used to reach the same desired results. Finally, for comparative studies between synthetic and this natural dye, all dyed specimens were tested for wash and light fastness properties, making weld a viable alternative to synthetic acid dyes.     

Solid state fermentation of lipopeptide antibiotic iturin A by using a novel solid state fermentation reactor system

A new solid state fermentation reactor (SSFR) for solid substrate was used for the production of lipopeptide antibiotic iturin A using Bacillus subtilis RB14-CS. Solid state fermentation (SSF) is the technique of cultivation of microorganisms on solid and moist substrates in the absence of free water. SSF has shown much promise in the development of several bioprocesses and products because of their several advantages like absence of free water that allows simplified downstream processing and low cost. SSFR allows agitation of the SSF culture with improved temperature control and air supply. Interestingly, when okara, the widely available waste product from the tofu industries, was used as the solid substrate for the SSFR, no iturin A production was observed. However, without agitation, production of iturin A was observed in the SSFR but the production level remained low. The low production of iturin A was found to be due to the heat generation and excess temperature rise inside the reactor system during the fermentation process. Maintaining the temperature within a range of 25–30°C, production of iturin A was significantly improved in the SSFR. This was comparable to the laboratory scale production, and signifies the potential application of the SSFR for SSF.     

Modeling carbon sequestration under zero-tillage at the regional scale. II. The influence of crop rotation and soil type

For policy decisions with respect to CO₂-mitigation measures in the agricultural sector, national and regional estimations of the efficiency of such measures are required. The conversion of ploughed cropland to zero-tillage is discussed as an option to reduce CO₂ emissions and promises at the same time effective soil and water conservation. Based on the upscaling of simulation results with the soil and land resources information system SLISYS-BW, estimations of CO₂-mitigation rates in relation to crop rotations and soil type have been made for the state of Baden-Württemberg (Germany). The results indicate considerable differences in the CO₂-mitigation rates between crop rotations ranging from 0.48 to 0.03 Mg C ha⁻¹ a⁻¹ for winter cereals–spring cereals–rape rotations and winter cereals–spring cereals–corn silage rotations, respectively. The efficiency of the crop rotations is strongly related to the total carbon input and in particular the amount of crop residues. Among the considered soil types, highest CO₂-mitigation rates are associated with Cumulic Anthrosols (0.62 Mg C ha⁻¹ a⁻¹) and the lowest with Gleysols (−0.01 Mg C ha⁻¹ a⁻¹). An agricultural extensification scenario with conventional plowing but conversion of the presently applied intensive crop rotations to a clover–clover–winter cereals rotation indicated a CO₂-mitigation potential of 466 Gg C a⁻¹. However, the present high market prices for cereals and increasing demand for energy production from biomass encourages an intensification of the agricultural production and an excessive removal of biomass which in future will seriously reduce the potential for carbon sequestration on cropland.