Kinetics study of photocatalytic process for treatment of phenolic wastewater by TiO2 nano powder immobilized on concrete surfaces

In this study, kinetics of photocatalytic degradation of phenolic wastewater in immobilized photocatalytic reactor was investigated. Immobilization of titanium dioxide (TiO₂) nano powders on concrete surfaces were accomplished with epoxy concrete sealer. Kinetics of photocatalytic reactions has been proposed to follow the Langmuir–Hinshelwood model in different initial phenol concentration, pH, and UV lamp intensity. First-order reaction kinetics with respect to the pollutant concentration was obtained for the reaction. Effect of UV lamp intensity showed that kinetic constants were proportional to the power of 0.73–1 of the photonic flow. In all cases kinetic constant increases as pH of the system reached up to 12 units. Several reaction intermediates were identified using the GC/Mass analysis. Products at the initial stage of the reaction were aromatic compounds, contained hydroquinone, benzoquinone, and catechol. These intermediates underwent further photocatalytic oxidation to aliphatic compounds and finally into CO₂ and H₂O after 4?h. Kinetic constants of intermediate compounds were determined using mathematical–chemical equations and nonlinear regression. Data showed that the differences between the mathematical model and Langmuir–Hinshelwood model for the kinetic constant was less than 5%.     

Phytoextraction of Cr(VI) from soil using Portulaca oleracea

Cr(VI) represents an environmental challenge in both soil and water as it is soluble and bioavailable over a wide range of pH. In previous investigations, Portulaca oleracea (a plant local to the United Arab Emirates (UAE)) demonstrated particular ability for the phytoextraction of Cr(VI) from calcareous soil of the UAE. In this publication, the results of the evaluation of P. oleracea phytoextraction of Cr(VI) from UAE soil at higher concentrations are reported. P. oleracea was exposed to nine different concentrations of Cr(VI) in soil from 0 to 400 mg kg^?1. The uptake of Cr(VI) increased as its concentration in soil increased between 50 and 400 mg kg^?1, with the most efficient removal in the range from 150 to 200 mg kg^?1. The total chromium concentrations exceeded 4600 mg kg^?1 in roots and 1400 mg kg^?1 in stems, confirming the role of P. oleracea as an effective Cr(VI) accumulator. More than 95% of the accumulated Cr(VI) was reduced to the less toxic Cr(III) within the plant.     

Cytotoxicity of single-walled carbon nanotubes,multi-walled carbon nanotubes,and chrysotile to human lung epithelial cells

Carbon nanotubes (CNTs) have found numerous applications in various industries. Recently, adverse effects of these materials on human and animal cells in vitro have been reported. In the present study, the cytotoxicity of single-walled carbon nanotubes (SWCNTs), multi-walled carbon nanotubes (MWCNTs), and chrysotile asbestos in human lung epithelial cells has been studied using the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay. The cells were exposed for 6 h and 24 h to between 0.97 and 1500 μg mL^?1 of CNTs and chrysotile fibers prepared in two culture media containing 5% serum and 0.5% dimethylsulfoxide. Dose–response curves were obtained to determine the nonobservable adverse effect concentration and the half-maximum inhibitory concentration (IC₅₀). The way of dispersion affects the cytotoxicity of CNTs. For MWCNT, the toxicological indexes were lower than for SWCNT. Chrysotile fibers were even less cytotoxic than CNTs. Therefore, workplace control measures are recommended as priority for occupational and environmental conditions.     

Comparative phytotoxicity of ZnO nanoparticles,ZnO microparticles,and Zn2+ on rapeseed (Brassica napus L.): investigating a wide range of concentrations

The effects of ZnO nanoparticles (NPs), ZnO microparticles (MPs), and zinc ions (Zn²⁺) on some growth parameters of rapeseed (Brassica napus) seedlings have been studied. The growth inhibition by ZnO NPs was not stronger than that by ZnO MPs while treatment with Zn²⁺ inhibition was clearly stronger.     

Synthesis, physicochemical characterizations and catalytic performance of Pd/carbon-zeolite and Pd/carbon-CeO2 nanocatalysts used for total oxidation of xylene at low temperatures

In this work, xylene removal from waste gas streams was investigated via catalytic oxidation over Pd/carbon-zeolite and Pd/carbon-CeO₂ nanocatalysts. Activated carbon was obtained from pine cone chemically activated using ZnCl₂ and modified by H₃PO₄. Natural zeolite of clinoptilolite was modified by acid treatment with HCl, while nano-ceria was synthesized via redox method. Mixed supports of carbon-zeolite and carbonceria were prepared and palladium was dispersed over them via impregnation method. The prepared samples were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), Brunauer-Emmett-Teller surface area (BET), Fourier transform infrared spectroscopy (FTIR) and thermogravimetric (TG) techniques. Characterization of nanocatalysts revealed a good morphology with an average particle size in a nano range, and confirmed the formation of nano-ceria with an average crystallite size below 60 nm. BET analysis indicated a considerable surface area for catalysts (～1000 m²·g^?1). FTIR patterns demonstrated that the surface groups of synthesized catalysts are in good agreement with the patterns of materials applied in catalyst synthesis. The performance of catalysts was assessed in a low-pressure catalytic oxidation pilot in the temperature range of 100° C-250°C. According to the reaction data, the synthesized catalysts have been shown to be so advantageous in the removal of volatile organic compounds (VOCs), representing high catalytic performance of 98% for the abatement of xylene at 250°C. Furthermore, a reaction network is proposed for catalytic oxidation of xylene over nanocatalysts.     

Extraction and Characterization of Fiber Treatment Inula viscosa Fibers as Potential Polymer Composite Reinforcement

Journal of Polymers and the Environment - This research aims to characterize and analysis of newly cellulosic fiber extracted from Inula viscosa bark. The obtained Inula viscosa fibers were also...     

Introducing roadside hazard severity indicator based on evidential reasoning approach

Safety experts have, in recent years, been attentive to roadside accident severity and occurrence. Hitherto, to prioritize road segment hazardousness, there have been little efforts to quantify a well defined indicator. In this regard, the existing indicators are usually very plain and the overall configuration of roadside is rated by experts with an exact number describing its condition. Hence, the uncertainties which come with the subjective judgments cannot be regarded as of any substance. This research contribution therefore presents a procedure to assess the road safety (roadside safety indicator) by means of the evidential reasoning (ER) approach. The betterment of ER as opposed to the available procedures for roadside safety assessment is that the proposed approach makes allowance for the uncertainties which may arise from individual judgments. Additionally, when there is a dearth of evidence concerning factors which affect roadside hazardousness severity to collate several roadside segments, this procedure will offer the benefits of utilizing the maximum/minimum utility function. With the aid of the drawn indicator, organizations and agencies responsible for ensuring road safety can reach more flexible decisions to set in-place uncertain planning and road segments priorities. This indicator can also be utilized as a variable to include roadside conditions in crash severity prediction models. A field case study has also been carried out in an attempt to follow and validate the proposed approach which is based on the run-off accident history for a sample road segments. The crash data confirm the suggested indicator.     

Arsenic levels in rice grain and assessment of daily dietary intake of arsenic from rice in arsenic-contaminated regions of Bangladesh—implications to groundwater irrigation

Chronic exposure to arsenic (As) causes significant human health effects, including various cancers and skin disorders. Naturally elevated concentrations of As have been detected in the groundwater of Bangladesh. Dietary intake and drinking water are the major routes of As exposure for humans. The objectives of this study were to measure As concentrations in rice grain collected from households in As-affected villages of Bangladesh where groundwater is used for agricultural irrigation and to estimate the daily intake of As consumed by the villagers from rice. The median and mean total As contents in 214 rice grain samples were 131 and 143 μg/kg, respectively, with a range of 2–557 μg/kg (dry weight, dw). Arsenic concentrations in control rice samples imported from Pakistan and India and on sale in Australian supermarkets were significantly lower (p < 0.001) than in rice from contaminated areas. Daily dietary intake of As from rice was 56.4 μg for adults (males and females) while the total daily intake of As from rice and from drinking water was 888.4 and 706.4 μg for adult males and adult females, respectively. From our study, it appears that the villagers are consuming a significant amount of As from rice and drinking water. The results suggest that the communities in the villages studied are potentially at risk of suffering from arsenic-related diseases.