Study on the conversion of waste plastics/petroleum resid mixtures to transportation fuels

Catalytic coprocessing of model and waste plastics with light Arabian crude oil residue was investigated using NiMo/Al₂O₃, ZSM-5, FCC, and hydrocracking catalysts. Reaction systems that were studied included low density polyethylene (LDPE), high density polyethylene (HDPE), polystyrene (PS), and polypropylene (PP). A series of single (plastic/catalyst) and binary (plastic/resid/catalyst) reactions were carried out in a 25-cm³ micro autoclave reactor under different conditions of weight and type of catalyst, duration, pressure, and temperature. The optimum conditions selected for our work were: 1% catalyst by weight of total feedstock weight, 60min reaction time, 8.3Mpa of H₂, and 430°C. The product distribution for the binary system using plastic and petroleum residue provided some encouraging results. High yields of liquid fuels in the boiling range of 100°–480°C and gases were obtained along with a small amount of heavy oils and insoluble material such as gums and coke. In general, this study helps to demonstrate the technical feasibility of upgrading both waste plastics and petroleum resid, as well as an alternative approach to feedstock recycling.     

Assessment of strontium and calcium levels in Pakistani diet

To cope with nuclear emergency effectively due to ingestion of fission fragment (90)Sr, adequacy of nutritionally and radiologically important elements strontium and calcium was studied in typical Pakistani diet and baseline analytical data were generated. Concentrations of strontium and calcium were measured by using inductively coupled plasma-atomic emission spectroscopy (ICP-AES) and atomic absorption spectrometry (AAS) techniques. Daily dietary intake of strontium and calcium varied from 0.9 to 5.7 mg and 217 to 713 mg with the geometric mean value x geometric standard deviation of 2.6 x 1.7 and 487.1 x 1.4 mg d(-1), respectively. The average Sr concentration in the Pakistani diet was 1.4 times higher while Ca concentration was 0.4 times lower than the recommended values of the International Commission on Radiological Protection (ICRP). The calculated Sr/Ca ratio 5.3E-03 was also higher than the ICRP value. The study depicts that the strontium concentration in the Pakistani diet is adequate, while the calcium concentration is inadequate according to international standards and needs improvement.     

Multi-criteria decision analysis for the optimal management of nitrate contamination of aquifers

We present an integrated methodology for the optimal management of nitrate contamination of ground water combining environmental assessment and economic cost evaluation through multi-criteria decision analysis. The proposed methodology incorporates an integrated physical modeling framework accounting for on-ground nitrogen loading and losses, soil nitrogen dynamics, and fate and transport of nitrate in ground water to compute the sustainable on-ground nitrogen loading such that the maximum contaminant level is not violated. A number of protection alternatives to stipulate the predicted sustainable on-ground nitrogen loading are evaluated using the decision analysis that employs the importance order of criteria approach for ranking and selection of the protection alternatives. The methodology was successfully demonstrated for the Sumas-Blaine aquifer in Washington State. The results showed the importance of using this integrated approach which predicts the sustainable on-ground nitrogen loadings and provides an insight into the economic consequences generated in satisfying the environmental constraints. The results also show that the proposed decision analysis framework, within certain limitations, is effective when selecting alternatives with competing demands.     

Characterization of Environmentally Friendly Polymers by Inverse Gas Chromatography: I Amylopectin

Amylopectin, as a potato starch based polymer, with a molecular weight of six million gram/mol was characterized using the Inverse Gas Chromatography Method (IGC). DSC method was also used to measure the glass and melting temperatures. Both DSC and IGC agreed well on a T_g of 105°C and T_m of 160–166°C. Nineteen solutes (solvents) were injected onto a chromatographic column containing amylopectin. These solutes revealed the interaction of alkanes with AP, and the wettability and water intake of AP. Alkanes showed exothermic values of interaction parameters which were increased as the temperature increased and as the number of carbons in the alkane series decreased. Retention diagrams of these solutes in a temperature range of 80–200°C revealed two zones, crystalline and amorphous. T_g and T_m were measured using these zones which complimented the DSC values. The two zones were used to calculate the degree of crystallinity below the melting temperature which ranged from 85% at 104°C to 0% at 161°C. The dispersive component of the surface energy of amylopectin was measured using alkanes which ranged from 25.35 mJ/m² at 80°C to 8.47 mJ/m² at 200°C. This is attributed to the weak crystalline surface of AP at 80°C and when the surface melted at 160°C the surface energy decreased due to the thermal expansion of the surface.     

Designing an integrated model for strawberry growers’ behavior toward implementation of good agricultural practices in Iran

Environment, Development and Sustainability - Good agricultural practices (GAPs) include conscious agricultural techniques that are not harmful to human health and the environment, with the goal of...     

Markovian–Octant analysis based stable turbulent shear stresses in near-bed bursting phenomena of vortex settling chamber

The coherent structure in near-bed turbulent boundary layer of vortex chamber, particularly the bursting events and their associated shear stresses play the main role in sediment flushing process and consequently the trap efficiency of the vortex settling chamber. Hence, three-dimensional velocity measurements were made at 48 points near the bed of physical model of vortex chamber by using Micro-ADV. The pattern of sediment deposition at the bed of vortex settling chamber reveals three separate regions formed by three predominant currents of inlet flow, flushing flow and outlet over flow. Additionally, due to the instability and three-dimensional nature of the bursting events near the bed of chamber, the new method of Markovian–Octant analysis was applied to study the different classes of near-bed stable shear stresses of vortex chamber in three dimensions. Moreover, the role of each class of stable shear stresses on Sediment transport mechanism at the bed of vortex chamber is investigated.     

Studies on heavy metals in the ground waters of the city of Aligarh U.P. (India)

A study was conducted to determine the levels of heavy metals Cd, Cr, Cu, Fe, Mn, Ni, Pb, and Zn along with physico-chemical parameters in ground waters of Aligarh city, U.P. (India). Twenty seven samples of hand pump water and twenty three samples of municipal water supply were collected from different localities of the Aligarh city, five times during the period of two months at intervals of 12 days. The samples were analysed for physico-chemical characteristics (pH, electrical conductivity, chlorides, sulphates, total hardness, total alkalinity, nitrate-nitrogen, fluoride, calcium and magnesium) and heavy metal contents. The concentrations of heavy metals in the hand pump water samples were found in the ranges of Cd (ND-5.00); Cr (ND-30.00); Cu (ND-82.50); Fe (16.80–460.00); Mn (ND-425.00); Ni (ND-25.00); Pb (ND-25.00) and Zn (28.60–775.00) g l^–1. The heavy metal concentrations in the municipal water supply samples were found to be Cd (ND-5.00); Cr (ND-25.00); Cu (ND-37.50); Fe (8.00–37.50); Mn (ND-320.00); Ni (ND-25.00); Pb (ND-25.00) and Zn (2.00–271.87) g l^–1.It appears from the results of these studies the concentrations of Cd, Cr, Cu, Ni, Pb, and Zn in the ground waters of the Aligarh City were found to be lower than the prescribed limits of World Health Organisation (1984), whereas the values of Fe and Mn were found above the prescribed limits in some localities. The chloride total hardness and nitrate-nitrogen were comparatively higher in the hand pump water than the municipal supply water. The reason of higher values of these parameters may be ascribed to the surface disposal of sewage wastes, wastes from metal processing industries and other house hold refuses.     

Irrigation development and its environmental consequences in arid regions of India

The present paper examines the nature and dimensions of environmental transformation induced by canal irrigation in the arid region of India. The case study pertains to the Indira Gandhi Canal comand area in Rajasthan where the density and area of vegetation cover have increased due to afforestation, and the cultivated area has expanded due to irrigation. Consequently, there has been a perceptible improvement in the structure and fertility of sandy soils, but it would require a herculean effort on the part of the canal authority and local people to reduce soil erosion and siltation in the lower parts of stage I and the entire command area of stage II. Moreover, the water table has been rising rapidly throughout the command area of stage I. About half of the command area and adjoining Ghaggar basin in Ganganagar District will be facing the danger of waterlogging by the turn of the century. The incidence of irrigation-induced alkalization is higher in the lower parts of stage I. Soil alkalinity has appeared within five years of the introduction of irrigation in the interdunal basins and is manifested as a strong salt regime or calcareous pans near surface. This calls for immediate reclamation of the affected area and prevention of its expansion by altering the strategy of irrigation development, by changing cropping patterns, and by providing soil drainage.